WOODPECKERS REV032824 MT Center Gauge Owner’s Manual
- June 1, 2024
- Woodpeckers
Table of Contents
WOODPECKERS REV032824 MT Center Gauge
PARTS
DIAGRAM NUMBER/PART NAME
- MT Center Gauge
- Stainless Steel Marking Bar Inch (4 Bars) 1/4″, 3/8″, 7/16″ & 1/2″
- Stainless Steel Marking Bars Metric (5 Bars) 4, 5, 6, 8 & 10mm
If you think you’re missing anything, email us at mailroom@woodpeck.com. You can also call us at 800-752-0725 from 9:00 a.m. to 4:00 p.m. EST Monday – Friday.
USING INSTRUCTION
- LOCATING & MARKING THE CENTERLINE OF A BOARD
Install the Stainless Steel Marking Bar 2 or 3 of choice in the MT Center Gauge 1) Frame with the Knobs as shown. FIGUREA.
All of the Stainless Steel Marking Bars have a small hole bored in their centre. Simply close the MT Center Gauge on your stock, put a pencil or the tip of a scratch awl in the Centre and slide the MT Center Gauge along your board. FIGURE B. It doesn’t matter which Marking Bars you use. All of them will work the same.
LAYING OUT TENONS & MORTISES
The Stainless Steel Marking Bars come in 4 fractional sizes (1/4″, 3/8″, 7/16″
& 1/2″) and 5 metric sizes (4, 5, 6, 8 & 10mm). (Depending on which package
you purchase, you have tractiona1, metric or both.)
For whatever size mortise you want to lay out, install the correct Stainless Steel Marking Bar. Position the MT Center Gauge so it slightly overlaps the start and end lines of your mortise or tenon. Close the MT Center Gauge on your stock. Now the Stainless Steel Marking Bar is precisely located at the center of your stock. Mark each side of the Stainless Steel Marking Bar with a pencil or marking knife. FIGURE c.
At Woodpeckers we are constantly reviewing & improving our tools.
The most current version of our instruction manuals are always available to
download at woodpeck.com.
(Located in the bottom section of the tool’s page under the “Additional
Information” or “Instructions” tabs.)
: Be the first to know all the new products, OneTIME Tools & sales by
subscribing to our eClub. (Location at the top centre of our webpage
woodpeck.com.)
Subscribe to our YouTube channel to stay up-to-date on all the latest tooltips
& tricks.
INTERACT WITH US! Follow us on Facebook, Instagram & TikTok!
Enjoy shop tips, project ideas, tool techniques & more in our Woodworking
Resource Center/Blog. (Located at the bottom centre of our webpage
woodpeck.com.)
WARNING! This product can expose you to chemicals, including chromium, which is Inown to the Stale of Calloma lo causes cancer and birth detects or reproductive ha. For more information go lo www.P65wamings.ca.gov
If you think you’re missing anything, email us at
mailroom@woodpeck.com.
You can also call us at 800-752-0725
from 9:00 a.m. to 4:00 p.m. EST Monday – Friday.
QR SCAN
Scan the QR code above to watch the video or visit woodpeck.com under the video tab towards the bottom of the product page.
Woodpeckers, LLC Strongsville, Ohio
woodpeck.com
© 2023 Woodpeckers, LLC