Woodpeckers Delve Square Owner’s Manual
- May 15, 2024
- Woodpeckers
Table of Contents
Woodpeckers Delve Square
Scan the QR code above to watch the video or visit woodpeck.com under the video tab towards the bottom of the product page.
If you think you’re missing anything, email us at [email protected]. You can also call us at 800-752-0725 from 9:00 a.m. to 4:00 p.m. EST Monday – Friday.
USING THE DELVE SQUARE OFFSET BASE
The triangle blade is offset in the 3/4″-wide base with 1/4″ on one side and 3/8″ on the other. With commonly used 3/4″-thick stock, divide into thirds using the 1/4″ base offset. Or, locate the centre of the board by striking the 3/8″ base offset from each face and locate the centre of those marks.
SCRIBING PARALLEL LINES
Precision-machined holes at 1/8″ increments are positioned along the primary measurement scale. Use these holes to make repetitive layout lines with a mechanical pencil, .9mm lead is recommended.
USING THE DRILLING GUIDE WITH A SELF-CENTERING DRILL BIT
The Drilling Guide is positioned to make drilling holes in the exact centre of
3/ 4″ stock. Index the DelVe Square base off the edge at the desired location
and use a self-centring drill bit to drill the hole.
DRAWING ANGLES
Pivot off the base at the primary dimension scale side of the DelVe Square until your desired angle is positioned on the edge of your stock. In the example here, a 30° angle is being drawn.
FAST & PRECISE MACHINE SET-UP
You can use the base’s 3/ 4″ width or 1/4″ thickness, or the 1/8″ thick blade, to set your machine’s blade height or cut depth. Or stand the square on its base and use the primary measurement scale to make other height adjustments. These gauge block dimensions can be used to align your table saw fence or similarly at your bandsaw and router table setups.
PRECISION WOODWORKING TOOLS
Woodpeckers LLC Strongsville, Ohio woodpeck.com
WARNING!
This product can expose you to chemicals, including chromium, which is
known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov