Baseus BS-CM015 15W Halo Electric Wireless Charging Car Mount User Manual

Halo Electric Wireless Charging Car Mount
User Manual 

Please read this user manual carefully before use and keep it for future reference.

Installation

Product Specifications

Model No.: BS-CM015
Rated power: 15W
Charging port: Type-C
Ambiance light: Multi-color gradient light
Material: ABS+PMMA+silica gel
Color: Black
Installation area: Strip air vents (Not suitable for round and uniquely-shaped air ventSuitable phone size: 5.4”-6.7”
Clamp expansion: 60-90mm
Product size: 75 x 115 x 115mm
Lighting Effect Instructions

1. Stand by: Multi-color gradient light
2. Charging: Green light breathing
3. Fully charged: Green light on
4. Abnormal state: Red light flashing
5. Wireless charging off: No light

Button
Press button A or B to open the clamp Long-press button A or B to turn on/off wireless charging function
Clamp Open-Close/Induction Method

1. After powering on, the clamps will automatically open (by default).
2. When you place the phone onto the mount, the clamps automatically close in.
3. Press the button to open the clamps and take out the phone.
   Note: If the induction fails after you put the phone in, please take out the phone and place it in again.

User Tips

1. Please use 5V/2A, 9V/2A, 12V/1.67A or fast charging adapters for this product.
2. This product is equipped with protection circuits for over-current and over-voltage. Improper use may cause auto shutdown or lowering of the input power, so please check for any abnormalities and improper uses of the product.
3. The working temperature of the product is between 0°C and 25°C. Please keep the product away from water, fire, hot (>40°C) environment or cold (<-20°C) environment, and out of children’s reach.
4. Please use dry soft cloth to clean the surface, do not use chemicals, soap or detergent on this product.
5. Improper use or placement of the product may shorten the service life or even damage the product, for which we will not be responsible and the warranty will not cover, please understand.
6. Fast charging can’t be activated under the following circumstances:
   a) The remaining battery is higher than 60%
   b) When the temperature of the phone gets higher than 35℃,the charging speed will slow, so please charge the product in a suitable environment.

Declaration on hazardous substances and elements contained in electronic products

This form is compiled in accordance with SJ/T 11364.
O:It indicates that the content of the harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard. X: The content of harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
Warm Tip: The 5-year icon refers to the “effective life of environmental protection”, not the product quality assurance period. Electronic products all contain harmful substances such as lead, mercury, and cadmium. Once they are overused, harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term “environmental protection use” means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.
It is hereby declared that this product model BS-CM015 of Shenzhen Times Innovation Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU, Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com.
This equipment complies with the provisions of Directive 2012/19/EU. It is strictly forbidden to dispose of this equipment with the ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur n a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‒ Reorient or relocate the receiving antenna.
‒ Increase the separation between the equipment and receiver.
‒ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‒ Consult the dealer or an experienced radio/TV technician for help.
FCC ID : 2A482-BS-CM015
Warning
Please follow the above safety instructions Otherwise it will cause fire, electric shock, damage, or other damage.

Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add 2nd Floor, Building B, Baseus Intelligence Park, No.2008,
Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: Q/BASEUS 019
Hotline: +86-4000-712-711 Website: www.baseus.com

References

• Baseus Official | Simple for More

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>