4smarts 4S540998 Trident Wireless Charger Instruction Manual

June 1, 2024
4smarts

4smarts 4S540998 Trident Wireless Charger Instruction Manual
4smarts 4S540998 Trident Wireless Charger

Thank You
for choosing a quality product from 4smarts

Safety Instructions

General precautions

  • Do not drop the product or subject it to heavy shocks.
  • Have the product repaired by a qualified technician only.

Precautions for electrical products

  • Protect the device from dirt, moisture, overheating, extreme temperatures.
  • Do not open the device and do not continue to operate it if damaged.
  • Never use force when plugging in the device or when using adapters.
  • Do not operate the device outside its performance limits specified in the technical data.

Warning-magnets

  • People with pacemakers should keep away from the magnets. The magnets can negatively affect the function of the pacemaker.
  • Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted.

Technical Data

  • IN USB-C: AC 12V/2.5A (30W max.)
  • OUT USB-C1/C2: DC 5V/1A (5W max.)
  • OUT Wireless Phone: 5W/7.5W/10W/15W
  • OUT Wireless TWS: 5W
  • Material: PC+Aluminium alloy
  • Supports: Apple StandBy Function, MagSafe
  • Protocols: Magnetic Power Profile (MPP), Extended Power Profile (EPP),

Baseline Power Profile ( BPP), Samsung Proprietary Power Delivery Extension (PPDE)

Foldable compact design
Integrated overheating protection
Optimised 30W power supply with 1.5m USB-C cable included

UltiMag ring included for non-MagSafe / Qi2 devices

Please note: For the upright charging function, the smartphone must be
Qi2 or MagSafe-enabled (check the device’s manufacturer page for information) or use our UltiMag Ring to use this function.
Instructions

Included in the scope of delivery

  1. Trident
  2. 30W Charger
  3. 1.5M USB-C cable
  4. UltiMag Ring
  5. MFi Fast Charger

Included in the set: If you have purchased the [Trident] in a complete set, the [addional MFi Apple Watch Fast Charger] is already included in your packaging.
Follow the instructions in section [4] to connect it.

As an optional accessory: If you did not receive the [additional MFi Apple Watch
Fast Charger] in the set, you can purchase it separately as an optional accessory.
After purchase, follow the same instructions in section [4] to use it.

Getting Started

  1. Connect the USB-C cable supplied with the 30-watt charger to the USB-C input (marked 2) on a 100-240V power source. After connecting, the blue LED lights up and goes out automatically after 15 seconds. To keep the LED lit for longer, double-click on the LED switch. When the indicator goes out, check the connection and renew it if necessary.
  2. Place your device with integrated wireless charging function in the correct position on the charger. The indicator (marked 7) lights up green as soon as charging starts.
    You can switch the LED indicator on or off manually by clicking 2x on the touch switch (marked 6).

LED function indicator

| LED charging area
---|---
Power supply| Brief illumination blue
Standby| Off
Charging process| Lights up green
End of charging| Lights up green
Error message| Flashes red

Function Notes

How to use your wireless charging station?
Charging your wireless smartphone

  1. Place your compatible smartphone on Charging Area (marked as 1).
  2. The device will automatically dock thanks to the integrated magnetic rings.
  3. Once docked, the LED function indicator (marked 7) for Charging Area will light up in green, indicating that the charging process has started.

Charging your TWS headset

  1. Place your wireless charging case on Charging Area (marked as 3).
  2. The LED indicator on the wireless charging case lights up briefly to indicate that the charging process has started.

Charging your smartwatch

  1. Connect your smartwatch charger to one of the two USB-C ports available. (marked as 4 or 5)
  2. Place your smartwatch on the designated holder.
    Note: The charging areas operate independently, allowing you to charge your devices as needed.

Troubleshooting

My device does not charge via Wireless charge

  • Check if the smartphone you are using is compatible for fast wireless charging. If possible, also test it with another wireless charger.
  • If necessary, remove the protection cover or metal sticker from the back of your device.
  • Check to see if another device that supports wireless charging is not charging. This will help determine if there is a defect or compatibility problem.

Charging is too slow

To ensure successful charging, please ensure that the distance between the wireless charger and the charging device is less than or equal to 5mm. If the LED light is red, please check for foreign objects and remove them.

Care and Maintenance

Only use a soft, dry cloth to clean the device.

Warranty

The 4smarts GmbH assumes no liability and provides no warranty for damage resulting from improper use of the product or from failure to observe the operating instructions and/or safety notes.

Disposal Notification

Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electric and electronic devices as well as batteries at the end of their service lives to public collecting points set up for this purpose or point of sale.

Service and Support

If the product is defective or in case of problems during installation, please consult your dealer or the 4smarts product consulting via: https://www.4smarts.com/contact

Service Hotline
Monday – Friday: 9 – 17h
+ 49 (0)821 20708444
E-Mail: customer-service@4smarts.com

Attestation of Conformity

Hereby, 4smarts GmbH, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The declaration of conformity may be consulted at www.4smarts.com.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This device complies with part 15 of the FCC Rules. Operationis subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

4smarts Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals