4smarts 26800MAH Lucid Air Power Bank Instruction Manual

June 1, 2024
4smarts

4smarts 26800MAH Lucid Air Power Bank

THANK YOU
FOR CHOOSING A QUALITY PRODUCT FROM 4SMARTS

Safety instructions

General Precautions

  • To avoid damage, do not drop the product and do not subject it to violent shocks.
  • Only have repairs carried out by qualified specialists.

Precautions for electronic products

  • Protect your device from dirt, moisture, overheating, and extreme temperatures to ensure long-lasting functionality.
  • Do not open the device yourself and do not continue operation if there is visible damage.
  • Do not use force when connecting the device and any adapters used.
  • To avoid overloading and damage, do not operate the device outside the power limits specified in the technical data.

Precautions for batteries

  • Recharge the battery regularly during long periods of storage, but at least quarterly, to maximize its service life.
  • Do not leave rechargeable batteries and batteries exposed, do not damage them, do not attempt to open them and do not release them into the environment. Rechargeable batteries contain toxic and environmentally harmful heavy metals.
  • Avoid contact of liquids from leaking batteries with your skin or eyes. If contact does occur, rinse the affected areas immediately with plenty of water and seek medical attention.

Technical Data

Battery

  • Li-Ion battery
  • 8900mAh*3 / 11.1V / 98.78Wh

Interfaces

  • 2x USB-C
  • 1x USB-A

Power output

  • USB-C: up to 65W
  • USB-A: up to 22.5W

Input/output specifications

  • USB-C: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A
  • USB-A: 4.5V/5A, 5V/3A, 9V/2A, 12V/1.5A

Fast charging protocols

  • Output (C and A): PD, QC2.0, QC3.0, FCP, AFC, SCP, VOOC
  • Input (C): PD, AFC, FCP

Power distribution

  • C1+C2 : 45W+20W Max
  • Single port USB-C1 : 65W Max
  • C1+A1 : 45W+22.5W Max
  • C1+(C2+A): 45W + split 15W

Charging

  • Full charge : Approx. 3 hours 10 minutes with 65W adapter via USB-C1

Operating conditions

  • Operating temperature: Discharge -10 to 60°C, Charge 0 to 50°C
  • Storage temperature: -20°C to 40°C
  • Altitude condition : Non-tropical environment below 2000m

Additional features

  • Display: TFT-LCD HD (80 x 160)
  • Flashlight: 500lm with 4 modes incl. SOS function
  • Material: Highly permeable PC, ABS (fireproof V0), carrying strap made of silicone Waterproof, dustproof, shockproof (IP67)

ENERGY STORAGE MANAGEMENT OPERATING SYSTEM

4smarts-26800MAH-Lucid-Air-Power-Bank-FIG-1 4smarts-26800MAH-Lucid-Air-Power-Bank-FIG-2

Getting Started

Switch on the screen
Press the screen switch button once to switch the screen on. Note that the screen automatically switches off after 10 seconds of inactivity to save energy.

How to charge the power bank
Fully charge your power bank before using it for the first time.

  1. Switch on the power bank. The LCD screen is activated and shows you the current charge level using a battery symbol.
  2. Connect one end of the supplied USB-C cable to the USB-C charging port of the power bank and plug the other end of the cable into a mains charger that is compatible with the required power.
  3. Connect the charger to a suitable and safe power source to start the charging process.

Check the charging status on the LCD screen from time to time. Once the power bank is fully charged, disconnect it from the charger. Please note that the actual charging speed also depends on the charger used (sold separately).

How to charge a smartphone or other mobile devices
With the 65 W PD fast charging function and the two combined USB-C ports and one USB-A port, you can charge multiple devices at the same time – even while the power bank itself is charging.

USB-C
Use the USB-C ports to quickly charge notebooks or smartphones that support Power Delivery (PD). This applies to iPhones from the 8th generation onwards, for example. These ports are ideal for devices that require fast power transfer.

USB-A
The USB-A port is suitable for a wide range of devices. It supports various fast charging protocols, such as Qualcomm Quick Charge, and therefore charges numerous smartphones and tablets quickly. Use this connection if you have devices that are compatible with these standards.

To charge your devices optimally, follow these steps:

  1. Select the appropriate port for your device (USB-C or USB-A).
  2. Connect the charging cable to the corresponding port on the  power bank
  3. Connect the other end of the cable to your device. The power bank will automatically start charging your device. Check the charge level on your device to make sure it is charging correctly.

LED torch
To activate or deactivate the integrated LED flashlight, press and hold the on-screen switch button. The Lucid Air offers you five different modes for every situation: high beam, bright light, normal light, low beam and an SOS mode for emergencies.

Function Notes

For efficient use

  • Make sure that the power bank is sufficiently charged before you use it to charge other devices.
  • If you connect another device, the power bank switches the distribution of the output power. To do this, the charging process of the other devices is deliberately interrupted for a moment.
  • The power bank only charges laptops when it has enough power.
  • Charging several devices at the same time can extend the charging time.

Ensure that the cables and connections are clean and undamaged to ensure optimum performance. In case of water contact: If water gets into the connections, it is important that you wait until the connections are completely dry before using the device again. This will prevent damage and ensure the safe use of your device.

Care and Maintenance

  • Only use dry, soft cloths for cleaning.

Warranty

4smarts GmbH accepts no liability or warranty for damage resulting from improper installation, assembly, and improper use of the product or failure to observe the operating instructions and/or safety instructions.

Disposal Notification

Electrical and electronic devices and batteries must not be disposed of with household waste. The consumer is legally obliged to return electrical and electronic devices and batteries at the end of their service life to the public collection points set up for this purpose or to the point of sale

Service and Support

In the event of defective products or problems during installation, please contact your dealer or the 4smarts product support at: https://www.4smarts.com/contact

Service hotline
Monday – Friday: 9 a.m. – 5 p.m. +49(0)82120708444 E-Mail: customer- service@4smarts.com

Thanks for buying our product! We at 4smarts are sure it will serve you well. Follow us on social media for news, customer support and to win great prizes. See you there!

4smarts GmbH, Postfach 102306, 86013 Augsburg, Germany All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals