4smarts 462710 Selfie Stand Loomi Pod Fold User Manual

4smarts 462710 Selfie Stand Loomi Pod Fold

Thank You
For choosing a quality product from 4smarts

Safety instructions

General Precautions

• Do not drop the product or subject it to violent shocks.
• Have the appliance repaired by professionals only.

Precautions for electronic devices

• Protect the product from dirt, moisture, overheating and extreme temperatures, and use it only in dry rooms.
• Do not open the unit and do not operate it if it is damaged.
• Never use force when plugging in the unit or any adapters.
• Do not operate the unit outside the performance limits specified in the technical data.

Precautions for batteries

• Avoid storage, charging, and use in extreme temperatures.
• Recharge the battery regularly (at least quarterly) if stored for a long time.
• Never open, damage, or swallow batteries or allow them to enter the environment, as they contain toxic and environmentally harmful heavy metals.
• In the event of a leaking battery, do not allow the liquid to come into contact with the skin or eyes. In case of contact, wash out with plenty of water and consult a doctor.

Technical data

• Product name: Selfie Stand LoomiPod Fold with LED Lamps and Bluetooth Remote for Smartphones
• Input: Micro-USB (5V / 0,2A)
• Material: Aluminium, ABS, and PC
• Battery capacity: 1000mAh lamp and SOmAh remote control
• Mobile phone mount: extendable clamp (50mm – 82mm)
• Connection: Bluetooth 4.0
• Bluetooth Frequenz: 2.402-2.480 GHz
• Connection range: < 10 meters
• Compatibility: Universal for Android and Apple IOS
• Functions: remote control, Various light modes, 2 LED lamps, 360° rotatable and adjustable stand (40-126cm)
• Operating time: 3-12 hours
• Weight: 1.2 kg

First steps

The product is in energy-saving mode when come out from the factory. For first-time use, please long press both fill lights buttons at once for 2 seconds.

Remote control

1. Power on
   Long press the camera button for 2 seconds, the blue flash LED indicator flash, and the product go into the pairing status.

2. Bluetooth pairing
   Turn on your phone’s Bluetooth function in settings, search for the product on the list (DOXG-V6), and click to pair. The blue light turns off after the device paired successfully.

3. Recording video/Take photo
   Open the phone camera, and press the product camera button to take photos or record video (the blue LED Indicator wilt flash once).

4. Power off
   Long press the camera button for 2 seconds, and the blue LED Indicator light will flash once, and the product turns off.

Fill light

1. Turn off the light
   Long press the light button (2 sek.) to turn on the light device. Light has 7 light modes (2 white light modes, 2 yellow light modes, and 3 mixed-light modes). Short press the fill light power button to switch between light modes.

2. Turn off the light
   Long press the light power button (2sek.) until the light turns off.

Note: Always aim the remote controller IA light into the lamp IA receiver when you use the remote controller.

Function Notes

General information

Remote Control:

Energy-saving mode
If the unit is not used for 5 minutes after pairing, it automatically switches to sleep mode. When you want to switch it back on, press the camera button again.

Charging

1. Charging the lamp: Connect the Micro-USB cable end of the supplied USB cable to the LoomiPod charging port and USB-A port to the power supply (not supplied).
2. Charging the remote control: Connect the Mlcro-USB cable end to the remote control and USS-A end to the mains adapter or USB-A port of the computer (the mains charger is not included).

Note: Recharge the batteries regularly and do not leave them completely discharged.

Maintenance and care

Use only dry clothes for cleaning. The product is not waterproof. Do not clean with water.

Warranty

4smarts GmbH accepts no liability or warranty for damage resulting from improper installation, assembly, and improper use of the product or failure to observe the instructions for use and/or safety instructions.

Environmental protection

Electrical and electronic equipment as well as batteries cannot be disposed of with household waste. Consumers are legally obliged to return electrical and electronic equipment as well as batteries at the end of their lifetime to the public collection points set up for this purpose or to sales points.

Service and support

In the case of a defective product or problems during installation, please contact your dealer or the 4smarts product support via: http://www.4smarts.com/contact

Service Hotline
Monday -Friday 9 am -Spm
+ 49 (0)821 20708444
Email: customer-service@4smarts.com.

Attestation of conformity

Hereby, 4smarts GmbH declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity can be viewed at: www.4smarts.com.

4smarts
Thanks for buying our product! We at 4smarts are sure it will serve you well. Follow us on social media for news, customer support and to win great prizes.

See you there!

• @4smarts_ollicial
• facebook.com/4smarts
• linkedin.com/company/4smarts.

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>