Canac 4011536 Ultra Thin LED Recessed Light User Manual

June 1, 2024
Canac

**Canac 4011536 Ultra Thin LED Recessed Light User Manual


**

CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

INSTRUCTIONS AND WARNINGS

  • Turning the light fixture switch off to turn off power is not enough to avoid electric shocks. Make sure that the power is turned off at the source (breaker) before proceeding with the installation and cleaning.
  • For indoor use only.
  • Keep out of reach of children and animals.
  • This product must be installed in accordance with the Canadian Electric Code (CE Code) by a qualified person.
  • This light fixture must be installed on an electrical outlet box. The box must be directly supported by the building structure.
  • Any modification made to this product is strictly prohibited, as it could result in injury, death, property damage, or product failure.
  • To avoid product failure and electrical shocks, this product must be connected to an electrical grid and properly grounded.

ONE-YEAR LIMITED WARRANTY

NOVELLA offers a limited warranty for this product (hereafter: the “Product”) for one (1) year from the date of purchase of this Product, with the conditions set out below.

This limited warranty is valid only for the original purchaser of the Product and it may not be transferred.

The present limited warranty is not meant to exclude, restrict, limit or modify the legal warranty given by law to the purchaser of the Product.

If the Product contains a manufacturing defect or if one or more parts of the Product is defective, the retailer commits to replace or repair, at its sole discretion, the defective part or parts without charge under the following cumulative conditions: 1) the purchaser must contact the retail store where the Product was purchased; 2) the purchaser must return the defective part or parts or the Product to the retailer; 3) the purchaser must provide the retailer the invoice as proof of purchase and date of purchase of the Product; 4) the purchaser must supply the Product identification information, including the serial number or the model number; and 5) the period of one (1) year covered by this limited warranty must not be expired. If the retailer decides to replace the defective part or parts, the replacement part or parts would be new or reconditioned, equivalent to new parts. The present limited warranty does not create any other obligation with the provider of the guarantee than those explicitly described above.

This limited warranty is not applicable: 1) to consumable parts; 2) to normal wear; 3) when the Product is used for other purposes than what is described in the user guide (if any); 4) when the serial number or other identification information of the Product is erased or withdrawn; 5) to damages that are only aesthetic and do not affect the normal use of the Product; 6) when the damages, defects, faults or other problems arise from: a) an inadequate maintenance of the Product; b) a faulty installation or assembly of the Product or an installation or assembly that is not in accordance with the user or installation guide (if one is provided); c) a modification, a repair or dismantling of the Product by a person not authorized by the retailer or the manufacturer; d) the transportation by the purchaser, his employee, officer or representative; e) a negligence by the purchaser, his employee, officer or representative; f) an accident; g) a case of force majeure or any event that is not caused by the Product itself.

FRENCH VERSION VS ENGLISH VERSION
In case of discrepancy between the French and the English versions of the text of this limited warranty, the French version shall prevail.

CAUTION: MAKE SURE TO READ AND FOLLOW INSTRUCTIONS AND WARNINGS INDICATED ON THE BACK.

  1. Before beginning installation, turn off the power supply at the electrical panel.

  2. Determine the location in the ceiling where you will install the recessed light fixture. Using the provided cutting template, cut a hole in the ceiling with a drywall saw. **(Fig. 1).


    **

  3. Run the electrical wire through the hole and connect it to the electrical box. (Fig. 2).

  4. Open the electrical box and remove the appropriate knockouts.

  5. Insert the power cable through one of the knockouts and secure it with a cable connector.

  6. Connect the green ground wire on the cable to the green wire in the electrical box. Repeat for the remaining two wires: white wire to white wire, black wire to black wire. **(Fig. 3).


    **

  7. Place all wiring and connections back into the electrical box and close the cover.

  8. Connect the electrical box wire to the light fixture wire. **(Fig. 4).


    **

  9. Push the spring-loaded clips on the light fixture upwards and insert the base into the mounting hole. Release the clips so that the fixture is flush with the ceiling. (Fig. 5 and 6).


  10. Once installation has been completed, reconnect the power supply to verify that the light is working properly.

WARNING:
For the installation of this product, make sure you wear adequate protective gear. Make sure the ceiling shows no sign of steam of water.
Make sure the ceiling is airtight before determining where to install the light fixture.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals