poly S7310T Office Computer Desk Phone User Guide

June 1, 2024
Poly

QUICK START
SAVI 7310/7320 OFFICE FOR
COMPUTER AND DESK PHONE

S7310T Office Computer Desk Phone

poly S7310T Office Computer Desk Phone - overview 1poly S7310T Office Computer Desk Phone -
overview

CONNECT THE SYSTEM

Following the steps in the diagram, connect your headset system. Connect the base to your desk phone’s headset port, if available. Otherwise, connect the base to your handset port.
See the user guide to set up an optional HL10 lifter or EHS cable.

DOWNLOAD SOFTWARE

Poly Lens Desktop App is required for softphone call control.
Download: poly.com/software.

CHARGE YOUR HEADSET

Charge your headset for a minimum of 20 minutes by placing it in the cradle. The base battery icon green when charging.

POWER ON HEADSET

To turn on the headset, slide the Power button.

ADJUST THE BOOM

For optimum audio, bend the boom so it is approximately two nger widths from the corner of your mouth.
NOTE For true stereo listening when wearing the boom on the left, adjust the wearing preference setting in Poly Lens App, in the Ringtones & Volume section.

HOW TO

On the base there are 2 Audio buttons: computer **** and desk phone  These buttons allow you to switch to a erent audio source.

Make a call

  1. Tap an Audio button on the display panel. You hear a dial  tone.
    Desk phone only: Press phone’s Headset button or manually remove handset if you don’t have HL10 lifter or EHS cable.

  2. Dial from your softphone or desk phone.

End/take a call
To answer or end a call, tap the corresponding Audio button or tap the headset call button.
Desk phone only: If you don’t have an HL10 lifter or EHS cable, press your phone’s Headset button or remove the handset when answering a call and hang up when ending a call.
TIP Headset call control for the computer requires Poly software and softphone compatibility. See “Download software.”

STREAM MEDIA

To stream media from your computer, t press the base’s Computer Audio button and then play the media.

TROUBLESHOOTING

No call audio?
Ensure your headset is powered on.
If purchased separately, place your headset in the cradle to connect to the base.
Adjust the switch on the bottom of your base to letter A for most desk phones. Adjust to letter D for Cisco phones that don’t use an EHS cable. Need more help?
compatibility.plantronics.com/deskphone.
Is headset sound distorted/echoing?
Lower Listening or Speaking volume on the bottom of your base.
Lower volume on your desk phone.
Headset too tight?
Ge the headband wider.
Need more help?
View complete user guide: support.hp.com/poly

**** Recyclable where facilities exist
© 2023 Poly. DECT is a trademark of ETSI.
All trademarks are the property of their respective owners.
RMN : S7310T, S7310T/A, S7310T/J, S7310T/S, S7320T, S7320T/A,
S7320T/J, S7320T/S, CB7321, CB7321/A, CB7321/S, CB7321/J 215720-23. 09.23

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals