MOTORHEAD 48 Inch 0° 360 Degree Smart Digital Level User Guide
- June 16, 2024
- MOTORHEAD
Table of Contents
MOTORHEAD 48 Inch 0° 360 Degree Smart Digital Level
Calibration Instruction
If the level is dropped or you suspect inaccuracy of the level, You can re- calibrate the zero point.
- Place the level on a flat surface, press the “reset” button
- Press the “calibration” button till it appears “CALl”
- Press the “calibration” button again, and it will appear as “CAL2”
- Flip the level over, and press the “calibration” button till it beeps, now the level is calibrated and ready.
Specifications
| Step | Action | Display |
|---|---|---|
| 1 | Place the level on a flat surface, press the “reset” button | No specific |
display information provided
2| Press the “calibration” button till it appears “CAL1”| Displays “CAL1”
3| Press the “calibration” button again, it will appear “CAL2”| Displays
“CAL2”
4| Flip the level over, press the “calibration” button till it beeps|
Indicates the level is calibrated ready, no specific display is shown
FAQ
-
What should I do if my level is dropped?
You should re-calibrate the zero point of the level following the provided calibration instructions. -
How do I know when the calibration is complete?
The calibration process is complete when you press the “calibration” button until it beeps after flipping the level over. This indicates that the level is now calibrated and ready for use. -
What does “CAL1” and “CAL2” mean on the display?
“CAL1” and “CAL2” are indicators that appear on the level’s display during the calibration process. They guide you through the steps needed to recalibrate the level.