LG FV1413S2BA 13kg Front Load Washing Machine Owner’s Manual
- June 5, 2024
- LG
Table of Contents
FV1413S2BA 13kg Front Load Washing Machine
global_main.book.book Page 1 Monday, July 19, 2021 6:36 PM
OWNER’S MANUAL
WASHING MACHINE
ENGLISH
Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.
FV1413S2BA
MFL71671243 Rev.00_082521
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
global_main.book.book Page 2 Monday, July 19, 2021 6:36 PM
TABLE OF CONTENTS
This manual may contain images or content that may be different from the model
you purchased.
This manual is subject to revision by the manufacturer.
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE…………………………………………………..3 WARNING
………………………………………………………………………………………………3
INSTALLATION
Parts and Specifications …………………………………………………………………………8 Installation Place
Requirements …………………………………………………………..11 Unpacking the Appliance
……………………………………………………………………..12 Levelling the Appliance
………………………………………………………………………..13 Connecting the Water Supply
Hose………………………………………………………15 Installing the Drain Hose
……………………………………………………………………..17
OPERATION
Operation Overview……………………………………………………………………………..18 Control Panel
……………………………………………………………………………………….20 Preparing the Wash Load
…………………………………………………………………….23 Adding Detergents and Softeners
………………………………………………………..23 Programme Table ………………………………………………………………………………..27
Extra Options and Functions ………………………………………………………………..31
SMART FUNCTIONS
LG ThinQ Application ……………………………………………………………………………37 Smart Diagnosis
…………………………………………………………………………………..39
MAINTENANCE
Cleaning After Every Wash……………………………………………………………………41 Cleaning the Appliance
Periodically & Performing an Emergency Water
Evacuation……………………………………………………………………………………………42
TROUBLESHOOTING
Before Calling for Service……………………………………………………………………..45
ENGLISH
global_main.book.book Page 3 Monday, July 19, 2021 6:36 PM
SAFETY INSTRUCTIONS 3
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
The following safety guidelines are intended to prevent unforeseen risks or
damage from unsafe or incorrect operation of the appliance. The guidelines are
separated into WARNING’ and
CAUTION’ as described below.
Safety Messages
This symbol is displayed to indicate matters and operations that can cause
risk. Read the part with this symbol carefully and follow the instructions in
order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can cause serious
injury or death.
CAUTION
This indicates that the failure to follow the instructions can cause the minor
injury or damage to the product.
WARNING
WARNING
To reduce the risk of explosion, fire, death, electric shock, injury or
scalding to persons when using this product, follow basic precautions,
including the following:
Technical Safety · This appliance is not intended for use by persons
(including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
global_main.book.book Page 4 Monday, July 19, 2021 6:36 PM
4 SAFETY INSTRUCTIONS
· Children should be supervised to ensure that they do not play with the
appliance.
· If the power cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
· Use a new hose or hose-set supplied with the appliance. Reusing old hoses
can cause a water leak and subsequent property damage.
· Ventilation openings must not be obstructed by a carpet. · This appliance is
intended to be used in household only. · The inlet water pressure must be
between 50 kPa and 800 kPa.
Maximum Capacity The maximum capacity in some cycles for dry clothes to be
washed is 13 kg. The recommended maximum capacity for each washing programme
may differ. To get good wash results, please refer to Programme Table in
OPERATION chapter for further details.
Installation · Never attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken parts,
including a damaged cord or plug. · This appliance should only be transported
by two or more people holding the appliance securely. · Do not install the
appliance in a damp and dusty place. Do not install or store the appliance in
any outdoor area, or any area that is subject to weathering conditions such as
direct sunlight, wind, rain, or temperatures below freezing. · Make sure the
power plug is completely pushed into the power outlet. · Do not plug the
appliance into multiple outlet sockets, power boards, or an extension power
cable.
ENGLISH
global_main.book.book Page 5 Monday, July 19, 2021 6:36 PM
SAFETY INSTRUCTIONS 5
· Do not modify the power plug provided with the appliance. If it does not fit
the power outlet, have a proper outlet installed by a qualified electrician.
· This appliance is equipped with a power cord having an equipmentearthing /
grounding conductor (earthing pin) and a grounding power plug. The power plug
must be plugged into an appropriate outlet socket that is installed and
earthed / grounded in accordance with all local codes and ordinances.
· Improper connection of the equipment-grounding conductor can result in risk
of electric shock. Check with a qualified electrician or service personnel if
you are in doubt as to whether the appliance is properly grounded.
· This appliance must not be installed behind a lockable door, a sliding door
or a door with a hinge on the opposite side to that of the appliance, in such
a way that a full opening of the appliance door is restricted.
Operation
· Do not apply any sharp objects to the control panel in order to operate the
appliance.
· Do not attempt to separate any panels or disassemble the appliance.
· Do not repair or replace any part of the appliance. All repairs and
servicing must be performed by qualified service personnel unless specifically
recommended in this Owner’s Manual. Use only authorized factory parts.
· Do not push down the door excessively, when the appliance door is open.
· Do not put animals, such as pets into the appliance.
· Do not wash rugs, mats, shoes or pet blankets, stuffed toys, or any other
items other than clothes or sheets, in this machine.
· Keep the area underneath and around the appliance free of combustible
materials such as lint, paper, rags, chemicals, etc.
· Do not leave the appliance door open. Children may hang on the door or crawl
inside the appliance, causing damage or injury.
global_main.book.book Page 6 Monday, July 19, 2021 6:36 PM
6 SAFETY INSTRUCTIONS
· Do not put in, wash or dry articles that have been cleaned in, washed in,
soaked in, or spotted with combustible or explosive substances (such as waxes,
wax removers, oil, paint, gasoline, degreasers, drycleaning solvents,
kerosene, petrol, spot removers, turpentine, vegetable oil, cooking oil,
acetone, alcohol, etc.). Improper use can cause fire or explosion.
· Do not use or store flammable or combustible substances (ether, benzene,
alcohol, chemical, LPG, combustible spray, gasoline, thinner, petroleum,
insecticide, air freshener, cosmetics, etc.) near the appliance.
· Never reach into the appliance while it is operating. Wait until the drum
has completely stopped.
· Do not touch the door during a high temperature programme.
· In case of a water leak from the appliance or flood, disconnect the power
plug and contact the LG Electronics customer information centre.
· Turn off water taps to relieve pressure on hoses and valves and to minimize
leakage if a break or rupture should occur. Check the condition of the fill
hoses; they should be replaced after 5 years.
· If there is a gas leakage (isobutane, propane, natural gas, etc.) within the
home, do not touch the appliance or power plug and ventilate the area
immediately.
· If the drain hose or inlet hose is frozen during winter, use it only after
thawing.
· Keep all washing detergents, softener and bleach away from children.
· Do not touch the power plug or the appliance controls with wet hands.
· Do not bend the power cable excessively or place a heavy object on it.
· Avoid touching any water that is drained from the appliance during the wash.
· Make sure that drainage is working properly. If water is not drained
properly, your floor may get flooded.
ENGLISH
global_main.book.book Page 7 Monday, July 19, 2021 6:36 PM
SAFETY INSTRUCTIONS 7
· When the air temperature is high and the water temperature is low,
condensation may occur and thus wet the floor.
· Wipe off dirt or dust on the contacts of the power plug.
Maintenance · Disconnect the appliance from the power supply before cleaning
the
appliance. Setting the controls to the OFF or stand by position does not
disconnect this appliance from the power supply. · Securely plug the power
plug in the outlet socket after completely removing any moisture and dust. ·
Do not spray water inside or outside the appliance to clean it. · Never unplug
the appliance by pulling on the power cable. Always grip the power plug firmly
and pull straight out from the outlet socket. · Only qualified service
personnel from LG Electronics service centre should disassemble, repair, or
modify the appliance. Contact an LG Electronics customer information centre if
you move and install the appliance in a different location.
Disposal · Before discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse. · Dispose of all packaging
materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause suffocation.
· Remove the door before disposing of or discarding this appliance to avoid
the danger of children or small animals getting trapped inside.
global_main.book.book Page 8 Monday, July 19, 2021 6:36 PM
8 INSTALLATION
INSTALLATION
Parts and Specifications
NOTE
· Appearance and specifications may change without notice to improve the
quality of the appliance.
Front View
Rear View
a Control Panel b Detergent Dispenser Drawer c Drum d Door e Cover Cap f Drain Plug g Drain Pump Filter h Levelling Feet
a Power Plug b Transit Bolts c Drain Hose
ENGLISH
global_main.book.book Page 9 Monday, July 19, 2021 6:36 PM
Specifications
INSTALLATION 9
Power Supply Product Weight Dimension(mm)
Model W
FV1413S2BA 220240 V~, 50 Hz
73 kg
D” D’ D
H
W
600
D
615
D”
1145
H
850
D’
655
global_main.book.book Page 10 Monday, July 19, 2021 6:36 PM
10 INSTALLATION
Accessories
*1 The included accessories vary depending on the model you purchased.
Cold Supply Hose Spanner
Antislip Sheets*1 Elbow Bracket for Securing Drain Hose
Caps for Covering Transit Bolt Holes
Tie Strap*1
ENGLISH
global_main.book.book Page 11 Monday, July 19, 2021 6:36 PM
INSTALLATION 11
Installation Place Requirements
Before installing the appliance, check the following information to make sure
that the appliance should be installed in a correct place.
Installation Location
· This appliance must be installed on firm flooring to minimize vibration
during the spin cycle. Concrete flooring is best, being far less prone to
vibration during the spin cycle than wooden floorboards or a carpeted surface.
· If it is impossible to avoid positioning the appliance next to a gas cooker
or coal burning stove, an insulation (850 X 600 mm) covered with aluminum foil
on the side facing the cooker or stove must be inserted between the two
appliances.
· Ensure that when the appliance is installed, it is easily accessible for an
engineer in the event of a breakdown.
· When installing the appliance, adjust all four feet using the transit bolt
spanner provided to ensure the appliance is stable.
Floor Installation
To ensure sufficient clearance for water inlet hoses, drain hose and airflow,
allow minimum clearances of at least 20 mm at the sides and 100 mm behind the
appliance. Be sure to allow for wall, door, or floor moldings that may
increase the required clearances.
Index B C
Clearance (mm) 5 20
WARNING
· This appliance must only be used for domestic
household purposes and should not be used in mobile applications.
NOTE
· Never try to level any uneven floor by putting pieces of wood, cardboard or
similar materials under the appliance.
Wooden Floors (Suspended Floors)
When installing the appliance on wooden floors, use rubber cups to reduce
excessive vibration and unbalance. Timber or suspended type flooring may
contribute to excessive vibration and unbalance, errors and malfunction.
B
Index A
A
C
C
Clearance (mm) 100
· To reduce vibration, we recommend placing at
least 15 mm thickness of rubber cups a under
each adjusting foot of the appliance, secured to at least two floor beams with
screws.
· If possible, install the appliance in one of the corners of the room, where
the floor is more stable.
· Fit the rubber cups to reduce vibration.
global_main.book.book Page 12 Monday, July 19, 2021 6:36 PM
12 INSTALLATION
CAUTION
· If the appliance is installed on the unstable floor (e.g. wooden floor), the
warranty does not cover any damages and cost occurred due to the installation
on the unstable floor.
NOTE
· You can purchase rubber cups (part No. 4620ER4002B) from the LG service
centre.
WARNING
· Repairs to the appliance must only be carried out by qualified personnel.
Repairs carried out by inexperienced persons may cause injury or serious
malfunctioning. Contact your local authorised LG repairer.
· The power plug must be plugged into an appropriate outlet socket that is
installed and grounded/earthed in accordance with all local codes and
ordinances.
Ventilation
· Make sure that air circulation around the appliance should not be impeded by
carpets, rugs, etc.
Ambient Temperature
· Do not install the appliance in rooms where freezing temperatures may occur.
Frozen hoses may burst under pressure. The reliability of the electronic
control unit may be impaired at temperatures below freezing point.
· If the appliance is delivered in winter and temperatures are below freezing,
place the appliance at room temperature for a few hours before putting it into
operation.
Unpacking the Appliance
Lifting the Appliance Off the Foam Base
- This feature may vary depending on the model purchased. After removing the carton and shipping material, lift the appliance off the foam base.
Electrical Connection
· Do not use an extension cord or double adapter.
· Always unplug the appliance and turn off the water supply after use.
· Connect the appliance to an earthed socket in accordance with current wiring
regulations.
· The appliance must be positioned so that the plug is easily accessible.
· Power outlet must be within 1 meter of either side of the appliance.
- · Make sure the tub support a* comes off with
the base and is not stuck to the bottom of the appliance. · If you must lay the appliance down to remove
the carton base b , always protect the side of the
appliance and lay it carefully on its side. Do not lay the appliance on its front or back.
Removing the Transit Bolt Assemblies
To prevent the appliance from severe vibration and breakage, remove transit bolts and retainers.
ENGLISH
global_main.book.book Page 13 Monday, July 19, 2021 6:36 PM
INSTALLATION 13
1 Starting with the bottom two transit bolts a,
use the spanner (included) to fully loosen all transit bolts by turning them
counterclockwise.
· If the appliance rocks when pushing the top plate of the appliance
diagonally, adjust the feet again.
· Check whether the appliance is perfectly level after installation.
2 Remove the bolt assemblies by wiggling them
slightly while pulling them out.
3 Install the hole caps.
· Locate the hole caps b included in the
accessory pack or attached on the back.
NOTE
· Save the transit bolts and retainers for future use.
· Transport this appliance for the prevention of breakage as below: – The
transit bolts are reinstalled. – The power cord is secured to the back of the
appliance.
NOTE
· Timber or suspended type flooring may contribute to excessive vibration and
unbalance. Reinforcement or bracing of the timber floor may need to be
considered to stop or reduce excessive noise and vibration.
Adjusting and Levelling the Feet
When installing the appliance, the appliance should be aligned and perfectly
level. If the appliance is not aligned and level properly, the appliance may
be damaged or may not operate properly.
1 Turn the levelling feet as required if the floor is
uneven. · Do not insert pieces of wood etc. under the
feet. · Make sure that all four feet are stable and
resting on the floor.
Levelling the Appliance
Checking the Level
When pushing down the edges of the top plate diagonally, the appliance should
not move up and down at all (check both directions).
global_main.book.book Page 14 Monday, July 19, 2021 6:36 PM
14 INSTALLATION
NOTE
· Do not install the washing machine on a plinth, stand or elevated surface
unless it is manufactured by LG Electronics for use with this model.
2 Check if the appliance is perfectly level using a
spirit level a.
If you install the appliance on a slippery surface, it may move because of
excessive vibration. Incorrect levelling may cause malfunction through noise
and vibration. If this occurs, install the antislip sheets under the levelling
feet and adjust the level.
1 Clean the floor to attach the anti-slip sheets.
· Use a dry rag to remove and clean foreign objects and moisture. If moisture
remains, the anti-slip sheets may slip.
2 Adjust the level after placing the appliance in
the installation area.
3 Secure the levelling feet with the lock nuts b
by turning anti-clockwise against the bottom of the appliance.
3 Place the adhesive side a of the anti-slip
sheets on the floor.
· The most effective way is to install the antislip sheets under the front
feet. If it is difficult to place the sheets under the front feet of the
appliance, attach them under the rear feet.
4 Check if all lock nuts at the bottom of the
appliance are secured properly.
NOTE
· Proper placement and levelling of the appliance will ensure long, regular,
and reliable operation.
· The appliance must be 100% horizontal and stand firmly in position on a hard
flat floor.
· It must not `Seesaw’ across corners under the load.
· Do not let the feet of the appliance get wet. Failure to do so may cause
vibration or noise.
4 Put the appliance on the anti-slip sheets.
· Do not attach the adhesive side a of anti-
slip sheets to the feet of the appliance.
NOTE
· Additional anti-slip sheets are available at LG Electronics service centre.
Using Anti-Slip Sheets
This feature may vary depending on the model purchased.
ENGLISH
global_main.book.book Page 15 Monday, July 19, 2021 6:36 PM
INSTALLATION 15
Connecting the Water Supply Hose
Note for Connection
· Water pressure must be between 50 kPa and 800 kPa (0.58.0 kgf/cm²). If the
water pressure is more than 800 kPa, a decompression device should be
installed.
· Periodically check the condition of the water supply hose and replace the
water supply hose if necessary.
Connecting the Hose to the Water Tap
Connecting Screw-Type Hose to Tap with Thread Screw the supply hose connector
onto the water supply tap.
NOTE
· Do not overtighten the water supply hose or use mechanical devices to
tighten onto the inlet valves.
· No further backflow protection required for connection to the water inlet.
Connecting Screw-Type Hose to Tap Without Thread
1 Loosen the 4 fixing screws a.
Checking the Rubber Seal
Two rubber seals a are supplied with the water
supply hose. They are used to prevent water leaks. Connection to taps is
sufficiently tight.
· Do not use mechanical devices such as multi grips to tighten the water
supply hose. Ensure that the curved end of the water supply hose is connected
to the appliance.
2 Remove the guide plate b if the tap is too large
to fit the adapter.
3 Push the adapter onto the end of the tap so
that the rubber seal is connected to be watertight. Tighten the 4 fixing
screws.
4 Push the inlet hose c vertically upwards so
that the rubber seal within the hose can adhere
global_main.book.book Page 16 Monday, July 19, 2021 6:36 PM
16 INSTALLATION
completely to the tap and then tighten the hose by screwing it to the right.
connector latch plate. Make sure the adapter locks into place.
Connecting One Touch Type Hose to Tap Without Thread
1 Unscrew the adapter ring plate d and loose
the 4 fixing screws.
NOTE
· After connecting the water inlet hose to the water tap, turn on the water
tap to flush out foreign substances (dirt, sand, sawdust, and etc.) in the
water lines. Let the water drain into a bucket, and check the water
temperature.
2 Remove the guide plate e if the tap is too large
to fit the adapter.
Connecting the Hose to the Appliance
Screw the supply hose to the water inlet valve on the back of the appliance.
3 Push the adapter onto the end of the tap so
that the rubber seal is connected to be watertight. Tighten the 4 fixing
screws and the adapter ring plate.
· Do not connect the hose to the hot water supply for models with one water inlet. Connect to the cold water supply only.
4 Pull the connector latch plate f down, push
the inlet hose onto the adapter, and release the
NOTE
· After completing connection, if water leaks from the hose, repeat the same
steps. Use the most conventional type of tap for the water supply. In case
that the tap is square or too big, remove the guide plate before inserting the
tap into the adaptor.
ENGLISH
global_main.book.book Page 17 Monday, July 19, 2021 6:36 PM
INSTALLATION 17
· Make sure that the hose should not be kinked or trapped.
· When installing the drain hose to a sink, secure it tightly with string.
Installing the Drain Hose
Installing the Drain Hose with the Elbow Bracket
The drain hose should not be placed higher than 100 cm above the floor. Water
in the appliance may not drain or may drain slowly.
· Securing the drain hose correctly will protect the floor from damage due to
water leakage.
105 cm
· If the drain hose is too long, do not force it back into the appliance. This will cause abnormal noise.
global_main.book.book Page 18 Monday, July 19, 2021 6:36 PM
18 OPERATION
OPERATION
Operation Overview
Using the Appliance
Before the first wash, select the Cotton wash programme and add a half amount
of the detergent. Start the appliance without clothes. This will remove
possible residues and water from the drum that may have been left during
manufacturing.
1 Sort clothes by fabric type, soil level, colour and
load size as needed.
CAUTION
· Remove items from the flexible door seal gasket
to prevent clothing and door seal damage.
2 Open the door and load items into the
appliance.
CAUTION
· Before closing the door, ensure that all clothes and items are inside the
tub and not overhanging on the rubber door seal where they will become caught
when the door is closed. Failing to do so will cause damage to the door seal
and the clothes.
4 Add cleaning products or detergent and
softener.
· Add the proper amount of detergent to the detergent dispenser. If desired,
add fabric softener to the appropriate areas of the dispenser.
3 Close the door.
5 Press the Power button to turn on the
appliance.
6 Choose the desired cycle.
· Press the cycle button repeatedly or turn the cycle selector knob until the
desired cycle is selected.
global_main.book.book Page 19 Monday, July 19, 2021 6:36 PM
· Now select a wash temperature and spin speed. Pay attention to the fabric
care label of your clothes.
· Pressing the Start/Pause button without selecting a programme will cause the
Cotton programme to begin immediately, using the default settings.
OPERATION 19
ENGLISH
7 Begin cycle.
· Press the Start/Pause button to begin the cycle. The appliance will agitate
briefly without water to measure the weight of the load. If the Start/Pause
button is not pressed within a certain time, the appliance will shut off and
all settings will be lost.
NOTE
· In the following case, the door will not open even if you pause the washing
programme or turn the washing machine off.
– When the washing machine starts a washing programme and has water inside the
drum, the door will not open in order to prevent a flood until the washing
machine drains the water completely.
8 End of cycle.
· When the cycle is finished, a melody will sound. Immediately remove your
clothing from the appliance to reduce wrinkling.
global_main.book.book Page 20 Monday, July 19, 2021 6:36 PM
20 OPERATION
Control Panel
The actual control panel may differ from model to model.
Control Panel Features
Description
a Power On/Off Button
· Press this button to turn the washing machine on.
b Programme Knob
· Programmes are available according to the clothes type. · The lamp will
light up to indicate the selected programme.
c Start/Pause Button
· This button is used to start the wash cycle or pause the wash cycle. · If a
temporary stop of the wash cycle is needed, press this button.
d Extra Options and Functions
· To use the extra functions, press and hold the corresponding button for 3
seconds. The corresponding symbol lights up in the display.
· This allows you to select an additional programmes and will light when
selected. Remote Start With the LG ThinQ app, you can use a smartphone to
control your appliance remotely. · In order to use this function, refer to
SMART FUNCTIONS. Wi-Fi Press and hold the Delay End button for 3 seconds to
initiate the connection of the appliance to the LG ThinQ application.
ENGLISH
global_main.book.book Page 21 Monday, July 19, 2021 6:36 PM
OPERATION 21
Description
e Customizing Washing Programme Buttons
Use these buttons to adjust the water temperature or spin speed settings for
the selected programme. · The current settings are shown in the display. ·
Press the button for that option to select other settings.
f ezDispense Buttons
· Press the Dispenser 1 or Dispenser 2 to select ezDispense function. · LED
will light up to indicate the selected detergent type and amount. · When the
detergent or softener is insufficient;
– In case of pressing the Power button : The LED will blink and the chime will
sound. – In case of running the appliance : The LED will blink . ezDispense
Nozzle Clean · Press and hold the Spin button for 3 seconds to use the
ezDispense Nozzle Clean function. This function cleans residual detergent or
softener in the hose connected to the ezDispense(when changing the type of
detergent or softener).
g Display
· The display shows the settings, estimated remaining time, options, and
status messages. When the appliance is turned on, the default settings in the
display will illuminate.
· While the load weight is sensed automatically, the display on the control
panel blinks.
Time and Status Display
Description
a Programme Status Indicators
· When a washing programme is running, LED for the active stage will blink,
and the LEDs for the remaining stages will remain steady. Once a stage is
complete, the LED will turn off. If a cycle is paused, the active stage LED
will stop blinking.
global_main.book.book Page 22 Monday, July 19, 2021 6:36 PM
22 OPERATION
Description
b AI DD · AI DD M provides the appropriate drum rotation actions after load
sensing is completed. · M is activated when the Cotton, Mixed Fabric, and Easy
Care programmes are selected and
operated. – If too much detergent is used, too many suds can occur and this
will cause poor AI DD
performance.
c Estimated Time Remaining
· When a washing programme is selected, the default time for that programme is
displayed. This time will change as options are selected.
· If the display shows -:– , then the time will be displayed after the load
sensing has detected
the load size. This is normal. · The time shown is only an estimate. This time
is based on normal operating conditions.
Several external factors (load weight, room temperature, incoming water
temperature, etc.) can affect the actual time.
d lights up when the Wrinkle Care option is activated. e G lights up when the
Rinse+ option is activated.
f o lights up when the Intensive option is activated.
g f lights up when the appliance is connected to Wi-Fi network at home.
h H lights up when the programme starts and the door is locked.
ENGLISH
global_main.book.book Page 23 Monday, July 19, 2021 6:36 PM
OPERATION 23
Preparing the Wash Load
Sort the wash load for best washing results, and then prepare the clothes
according to the symbols on their care labels.
Sorting the Clothes
· For best washing results, sort your clothes according to the care label
stating fabric type and washing temperature. Adjust the spin speed or spin
intensity in accordance with the fabric type.
· Soil level (Heavy, Normal, Light): Separate clothes according to soil level.
If possible, do not wash heavily soiled items with lightly soiled ones.
· Colour (White, Lights, Darks): Wash dark or dyed clothes separately from
whites or light colours. Mixing dyed clothes with light clothes can result in
dye transfer or discolouration of lighter clothes.
· Lint (Lint producers, Collectors): Wash separately lint producing fabrics
from lint collecting fabrics. Lint producers can result in pilling and linting
on the lint collectors.
NOTE
· The dashes under the symbol give you information about the type of fabric
and the maximum allowance of mechanical stress.
Checking the Clothes before Loading
· Combine large and small items in a load. Load large items first.
· Large items should not be more than half of the total wash load. Do not wash
single items. This may cause an unbalanced load. Add one or two similar items.
· Check all pockets to make sure that they are empty. Items such as nails,
hair clips, matches, pens, coins and keys can damage both your appliance and
clothes.
Checking the Clothes Care Label
The symbols tell you about the fabric content of your garment and how it
should be washed.
Symbols on the Care Labels
Symbol
Wash / Fabric type · Normal Wash · Cotton, Mixed Fabrics · Easy Care · Synthetic, Mixed Fabrics · Special Delicate Wash · Delicates · Hand Wash Only · Wool, Silk · Do not wash
· Wash delicates (stockings, underwired bras) in a wash net.
· Close zippers, hooks and strings to make sure that these items do not snag
on other clothes.
· Pre-treat dirt and stains by brushing a small amount of detergent dissolved
water onto stains to help lift dirt.
Adding Detergents and Softeners
Detergent Dosage
· Detergent should be used according to the instruction of the detergent
manufacturer and selected according to type, colour, soiling of the fabric and
the washing temperature. Use only
global_main.book.book Page 24 Monday, July 19, 2021 6:36 PM
24 OPERATION
detergents that are suitable for Drum (front load) type washers.
· If too many suds occur, reduce the detergent amount.
· If too much detergent is used, too many suds can occur and this will result
in poor washing results or cause heavy load to the motor.
· If you wish to use liquid detergent, follow the guidelines provided by the
detergent manufacturer.
· You can pour liquid detergent directly into the main detergent drawer if you
are starting the wash cycle immediately.
· If you select the Pre Wash option after adding the detergent directly into
the drum, the detergent may be washed away, reducing the washing performance.
For best results, use the Pre Wash option with the ezDispense function. The
manual dispenser cannot be used for dispensing pre-wash detergent.
· Detergent usage may need to be adjusted for water temperature, water
hardness, size and soil level of the load. For best results, avoid overdosing
the detergent. Failing to do so will cause oversudsing.
· Refer to the label of the clothes, before adding the detergent and choosing
the water temperature.
· Use only suitable detergents for the respective type of clothing:
– Liquid detergent is often designed for special applications, e.g. for
coloured fabric, wool, delicate or dark clothes.
– Powdered detergent is suitable for all types of fabric.
– For better washing results of white and pale garments, use powdered
detergent with bleach.
– Detergent is flushed from the dispenser at the beginning of the wash cycle.
· Part load: 1/2 of the normal amount. · Minimum load: 1/3 of full load.
Using the ezDispense Function
When the ezDispense function is turned on, the liquid detergent and softener
are dispensed in the set amounts, at the appropriate time during the cycle. ·
A full detergent compartment will last for about
20 standard cycles, with the drum loaded halfway up with clothes. · The
default settings are configured to dispense 42 ml of detergent and 30 ml of
softener for 4-6 kg of normally soiled laundry. This can be changed using the
Dispenser 1 or Dispenser 2 button. Please refer to Extra Options and Functions
in OPERATION chapter for further details.
1 Slowly slide the detergent dispenser drawer
out as far as it will go.
a Liquid detergent compartment b Liquid fabric softener or Liquid detergent
compartment
2 Turn the lids on the ezDispense compartments
counterclockwise to open them.
NOTE
· Do not let the detergent harden. Doing so may lead to blockages, poor rinse
performance or odour.
· Full load: According to manufacturer’s recommendation.
3 Pour the detergent and softener into their
respective compartments, up to the MAX line.
global_main.book.book Page 25 Monday, July 19, 2021 6:36 PM
ENGLISH
OPERATION 25
· The ezDispense drawer has two compartments. Put the liquid detergent into
the right hand side compartment and the liquid fabric softener or liquid
detergent into the left hand side compartment. If detergent
is added to the b compartment, the fabric
softener cannot be used.
· Do not put liquid or powdered bleach, or powdered, gel or sheet type
detergents into the ezDispense compartments.
· Remove any residual detergent on the outside of the ezDispense drawer before
inserting it.
· Do not try to fill the compartments too quickly. Add detergent and softener
slowly to avoid overflows.
CAUTION
· Close lid and cover of the compartment securely before use. If not, the
detergent and softner will harden or overflow.
· Slide the detergent dispenser drawer out or in slowly and use both hands for
safety. Failure to do so can damage the washer or cause the detergent or
softener to leak out of the ventilation holes.
· Detergent or fabric softener left in the ezDispense compartments for an
extended period may harden and fail to dispense properly.
· Do not remove the dispenser drawer while the product is in operation.
· Remove detergent/softener in the ezDispense compartments before moving or
relocating the the washing machine.
· Keep the ezDispense compartment level to prevent contents from leaking.
4 After filling the compartments, insert the lids
and turn them clockwise until they are tightly closed.
· Securely close the lids to the ezDispense compartments to minimize airflow
which can harden these additives and prevent them from dispensing properly. Be
careful not to lose the lids.
Using the Manual Dispense Function
Add detergent to the manual dispenser.
1 Press the Dispenser 1 or Dispenser 2 button
repeatedly to turn off the ezDispense function.
5 Close the dispenser drawer slowly before
starting the cycle.
· Slamming the drawer closed may result in the detergent overflowing into
another compartment or dispensing into the drum earlier than programmed.
· Be careful not to get a hand caught in the drawer while closing.
· It is normal for a small amount of water to remain in the manual dispenser
compartments at the end of the cycle.
a Dispenser 1 button b Dispenser 2 button
global_main.book.book Page 26 Monday, July 19, 2021 6:36 PM
26 OPERATION
2 Open the detergent dispenser drawer.
NOTE
· The manual dispenser cannot be used for dispensing pre-wash detergent.
· When adding detergent tablets and water softener, be sure to turn off the
ezDispense function.
3 Load the laundry products into the appropriate
manual dispenser compartments.
· Use the main wash detergent compartment at the manual dispenser for powdered
or liquid detergent.
· Do not place detergent sheets, tablets or packs in the manual dispenser.
· If using single-use detergent packs, place the pack in the drum before
loading the laundry. Do not place liquid or powdered detergent packs in the
any of the dispensers.
Manual Main Wash Detergent Compartment
This compartment holds laundry detergent for the main wash cycle. It is
recommended that powdered detergent be used in this compartment.
· Liquid or powdered color-safe bleach may be added to the manual main wash
compartment with detergent of the same type. Do not mix liquids and powders.
· If you use a detergent that does not dissolve easily or a detergent with
high viscosity, it will leave a residue and clog the dispenser.
· Be sure to turn off the ezDispense function.
Adding Detergent Tablets
Detergent tablets can also be used when washing.
1 Open the door and put detergent tablets into
the drum before loading the clothes.
c Manual main wash detergent compartment
2 Load the clothes into the drum and close the
door.
4 Close the detergent dispenser drawer slowly
before starting the cycle. · Slamming the detergent dispenser drawer
may result in the detergent overflowing into another compartment or pouring
into the tub earlier than programmed.
CAUTION
· Do not place or store laundry products, such as detergent, bleach, or liquid
fabric softener, on top of your washer. These products can damage the washer’s
finish and controls.
NOTE
· Do not put tablets into the dispenser.
Adding Water Softener
A water softener, such as anti-limescale can be used to cut down on the use of
detergent in areas with high water hardness level. · First add detergent, and
then the water softener.
Dispense according to the amount specified on the packaging.
global_main.book.book Page 27 Monday, July 19, 2021 6:36 PM
Programme Table
Washing Programme
OPERATION 27
ENGLISH
Cotton Description
40 °C (Cold to 95 °C)
Max. Load: Rating
Washes normally soiled clothes by combining various drum motions.
Cotton+ Description
60 °C (Cold to 60 °C)
Max. Load: Rating
Washes normally soiled clothes by combining various drum motions with less energy consumption than Cotton programme with comparable settings.
TurboWash 39
40 °C (Cold to 60 °C)
Max. Load 5 kg
Description
With 4 water jets operating during the wash and rinse, this washing machine can wash a half load of lightly soiled clothes for approximately 39 minutes.
Mixed Fabric Description
40 °C (Cold to 60 °C)
Max. Load 5 kg
Washes mixed fabrics simultaneously.
· Use for various kind of fabrics except special garments (silk/delicate,
sports wear, dark clothes, wool, duvet/curtains).
Easy Care Description
40 °C (Cold to 60 °C)
Washes clothes that do not need ironing after washing. · Use for Polyamide,
acrylic, polyester.
Max. Load 5 kg
Silent Wash Description
40 °C (Cold to 60 °C)
Max. Load 6 kg
Washes clothes with less noise and vibration than other washing programmes. · Use for lightly soiled white cotton (underwear).
Allergy Care Description
60 °C
Max. Load 5 kg
Helps minimise substances that cause an allergic reaction. · Use for cotton, underwear, pillow covers, bed sheets, baby wear.
Delicates Description
20 °C (Cold to 40 °C) Washes machine-washable lingerie, sheer and lacy clothes.
Max. Load 4 kg
global_main.book.book Page 28 Monday, July 19, 2021 6:36 PM
28 OPERATION
Hand/Wool Description
30 °C (Cold to 40 °C)
Max. Load 2 kg
Washes hand-washable and machine-washable delicate clothes such as washable
wool, lingerie, dresses etc.
· Use detergent for machine washable woolens
Sportswear Description
40 °C (Cold to 40 °C)
Washes special garments like sports and outdoor wear. · Use for water-
repellent fabric laminate used on clothing.
Max. Load 4 kg
Speed 14 Description
20 °C (20 °C to 40 °C)
Max. Load 2 kg
Washes small loads of lightly soiled clothes for approximately 14 minutes.
Duvet Description
Cold (Cold to 40 °C)
Max. Load 2.5 kg (1 down duvet)
Washes large items such as bed covers, pillows, sofa covers, etc.
Tub Clean
–
–
Description
This function helps clean the inside of your appliance’s tub.
Download Cycle
–
–
Description
This programme allows you to download a new and special washing programme to your appliance with a smartphone. The default programme is Rinse+Spin.
NOTE
· Test accordance in conformity with IEC60456. For water efficiency labeling
program, select program `Cotton+ + 60 + 1400rpm’.
· ‘Cotton+ + 60 + 1400rpm’ is the recommended program designed to minimize
water consumption for normally soiled load at rated load capacity.
· Select the appropriate water temperature for chosen wash programme. Always
follow garment manufacturer’s care label or instructions when washing to avoid
damage to clothes.
· Select the proper wash temperature and spin speed for the desired
programmes.
· Actual water temperature may differ from the declared cycle temperature.
· Neutral detergent is recommended.
ENGLISH
global_main.book.book Page 29 Monday, July 19, 2021 6:36 PM
OPERATION 29
Extra Options
*1 This option is automatically inserted in the programme and can not be deselected.
NOTE
· Rinse+, Delay End and Add Item options can be selected for every washing
programme in the table below.
· Intensive option can be selected for every washing programme in the table
expect for Cotton+,TurboWash 39 and Speed 14 programmes.
Programme Cotton Cotton+
TurboWash 39 Mixed Fabric
Easy Care Silent Wash Allergy Care
Delicates Hand/Wool Sportswear
Speed 14 Duvet
Steam
# # # # # #*1
Wrinkle Care
# # # #
TurboWash
# #*1 # #
Pre Wash
# # #
#*1
Selectable Maximum Spin Speed
Programme Cotton Cotton+ TurboWash 39
Spin Speed
Default
Available
1400 rpm
All
1400 rpm
All
1200 rpm
400 to 1400 rpm
global_main.book.book Page 30 Monday, July 19, 2021 6:36 PM
30 OPERATION
Programme
Mixed Fabric Easy Care Silent Wash Allergy Care Delicates Hand/Wool Sportswear
Speed 14 Duvet
Spin Speed
Default
Available
1000 rpm
All
1400 rpm
All
800 rpm
Up to 1000 rpm
1400 rpm
All
800 rpm
Up to 800 rpm
800 rpm
Up to 800 rpm
800 rpm
Up to 800 rpm
400 rpm
All
1000 rpm
Up to 1000 rpm
NOTE
· Actual maximum spin speed may vary depending on the load conditions. The
values above are rounded to the nearest hundred.
global_main.book.book Page 31 Monday, July 19, 2021 6:36 PM
ENGLISH
OPERATION 31
Extra Options and Functions
You can use the extra options and functions to customize the programmes.
Customizing a Washing Programme
Each programme has default settings that are selected automatically. You may
also customize these settings using these buttons.
Temp. This button selects the wash temperature for the selected programme. ·
Press the Temp. button until the desired setting
is lit. · Select the water temperature suitable for the
type of load you are washing. Follow the garment fabric care labels for best
results.
Spin The spin intensity level can be selected by pressing this button
repeatedly. · Press the Spin button to select spin speed.
NOTE
· If No of the spin level is selected, the drum of the washing machine will
rotate before the drainage.
Rinse+ This function is recommended for people with detergent allergies. ·
Press and hold the TurboWash button for 3
seconds to add rinse once.
Intensive This function is used to wash normal and heavily soiled clothes. ·
Press and hold the Pre Wash button for 3
seconds.
Follow the next steps to customize a washing programme:
1 Prepare the clothes and load the drum.
2 Press the Power button.
3 Add detergent.
4 Select a washing programme.
5 Customize the washing programme (Temp.,
Spin, Rinse+ and Intensive) as necessary.
6 Press the Start/Pause button.
Only Using a Spin Function
1 Prepare the clothes and load the drum.
2 Press the Power button.
· Do not select a washing programme and do not add a detergent.
3 Press the Spin button.
4 Press the Start/Pause button.
NOTE
· If you select the washing programme, you will be unable to select a spin
only. If this occurs, press the Power button twice to cycle the machine off
and back on.
Using Special Options
You can customize the programmes by using the following special options: Steam
Adding this option helps provide better cleaning results.
Wrinkle Care Adding this option reduces wrinkles by steaming after spin.
global_main.book.book Page 32 Monday, July 19, 2021 6:36 PM
32 OPERATION
NOTE
· Selecting this option will tumble the clothes briefly every few minutes for
up to 30 minutes after the selected programme finishes. While
this option is running, ENd appears on the
display.
TurboWash Adding this option reduces the programme time but the similar
washing results will be provided.
Follow the next steps to use a special option.
1 Press the Power button.
2 Select a washing programme.
3 Customize the washing programme (Temp.,
Spin, Rinse+ and Intensive) as necessary.
4 To use special options,
Optional 1: Press Steam or TurboWash button. Optional 2: Press and hold Steam
button for 3 seconds to select the Wrinkle Care option.
5 Press the Start/Pause button.
Using Basic Options
You can customize the programmes by using the following basic options: Pre
Wash This option is recommended when washing a heavily soiled load.
1 Press the Power button.
4 Press the Start/Pause button.
Add Item You can use this option in order to add or remove clothes after the
washing programme has started.
1 Press the Power button.
2 Select a washing programme.
3 Press the Start/Pause button.
4 Press the Add Item button as necessary.
5 Open the door after it unlocks itself and add or
remove necessary clothing items.
6 Close the door and press the Start/Pause
button.
NOTE
· For safety reasons, the door remains locked when the water level or
temperature inside of the drum is high. It is not possible to add clothes at
this time.
Delay End You can set this function so that the appliance starts automatically
and finishes after a specified time interval.
1 Press the Power button.
2 Select a washing programme.
3 Press the Delay End button as necessary.
4 Press the Start/Pause button.
2 Select a washing programme. 3 Press the Pre Wash button as necessary.
NOTE
· Except for LED of the Delay End button, all LEDs on the control panel will
be turned off within 20 minutes. This feature may vary depending on the model
purchased.
ENGLISH
global_main.book.book Page 33 Monday, July 19, 2021 6:36 PM
OPERATION 33
· The delay time is the time to the end of the programme, not the start. The
actual running time may vary due to water temperature, clothes and other
factors.
· To cancel the function, the Power button should be pressed.
· Avoid using liquid detergent for this function.
Using the ezDispense
Use the Dispenser 1 and Dispenser 2 buttons to set up and control the
ezDispense function.
Changing Dispense Level for a Single Load
1 Press the Power button.
2 Turn the knob to select the desired cycle.
3 Press the Dispenser 1 or Dispenser 2 button
to increase or decrease the dispensed amount from the set defaults.
Buttons Indicator Dispensed Amount*1
More (110%)
Normal (100%)
Less (90%)
Off (0%)
a Dispenser 1 button
b Dispenser 2 button
c Liquid detergent indicator
d Link indicator (Using only liquid detergent both
compartments)
e Liquid fabric softener indicator
NOTE
· When the detergent or softener is insufficient; – In case of pressing the
Power button: The LED will blink and the chime will sound. – In case of
running the appliance: The LED will blink.
· The default settings are configured to dispense the detergent of Dispenser 1
and the fabric softener of Dispenser 2.
*1 The default settings are configured to dispense 42 ml of detergent and 30 ml of softener for 4-6 kg of normally soiled laundry.
4 Press the Start/Pause button.
NOTE
· Use the manufacturer’s recommendations on the detergent or fabric softener
package when setting the ezDispense amounts for a standard 4-6 kg load.
· Most cycles will automatically use the default amounts you have set,
indicated by the Normal LED light on the Dispenser 1 and Dispenser 2 buttons.
global_main.book.book Page 34 Monday, July 19, 2021 6:36 PM
34 OPERATION
NOTE
· The Delicates, Hand/Wool,Sportswear, and Tub Clean cycles turn the
ezDispense function off by default.
Using both Dispensers for Liquid Detergent
Changing Default Dispense Amounts
The default settings are configured to dispense 42 ml of detergent and 30 ml
of softener for 4-6 kg of normally soiled laundry. Detergent should be used
according to the instruction of the detergent manufacturer and selected
according to type, colour, soiling of the fabric and the washing temperature.
1 Press the Power button.
2 Change default dispense amounts.
· Dispenser 1: Press and hold the Dispenser 1 button for 3 seconds.
· Dispenser 2: Press and hold the Dispenser 2 button for 3 seconds.
3 Turn the knob to increase or decrease the
amount of detergent or fabric softener. The amount is shown in the display. ·
The default amounts can be increased or
decreased in 1 ml increments, within a range of 9 ml to 150 ml. The amount
dispensed may vary slightly depending on the model.
4 Save the default changes.
· Dispenser 1: Press and hold the Dispenser 1 button for 3 seconds.
· Dispenser 2: Press and hold the Dispenser 2 button for 3 seconds.
NOTE
· If you set both dispensers for liquid detergent, you can not use the liquid
softener dispenser for liquid softener.
· If you want to use a liquid softener: – After the programme is finished,
select Rinse+Spin (Default programme of Download Cycle) and add softener
directly into the drum or into the manual main wash detergent compartment. –
If you downloaded a download cycle, Rinse+Spin is not available.
Setting the Dispenser 2 for Same Liquid Detergent Dispenser
1 Press the Power button.
2 Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds.
3 Press the Dispenser 1 button to light up the b
Link indicator.
· The a Liquid detergent indicator is always
light on.
· When the b Link indicator is selected, the
Dispenser 2 button cannot be operated.
4 Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds to save the changes.
Setting the Dispenser 2 for Different Liquid Detergent Dispenser
1 Press the Power button.
global_main.book.book Page 35 Monday, July 19, 2021 6:36 PM
ENGLISH
OPERATION 35
2 Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds.
3 Press the Dispenser 2 button to light up the c
Liquid detergent indicator.
3 Press the Power button.
4 Press and hold the Spin button for 3 seconds to
clean the connected hose. When this option is
selected, dcL appears on the display.
4 Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds to save the changes.
Cleaning the ezDispense pumping system
Use this function to change the type of detergent or softener. This function
cleans residual detergent or softener in the hose connected to the
ezDispense a (when changing the type of
detergent or softener).
5 Press the Dispenser 1 or Dispenser 2 button
to select the compartment to be cleaned up. · Both compartments can be cleaned
at the
same time.
6 Press the Start/Pause button. Finishes this
function within 16 minutes.
Settings
Child Lock Use this option to disable the controls. This function can prevent
children from changing cycles or operating the appliance.
NOTE
· Run this function once a month (or more often if needed) to remove detergent
buildup and other residue.
· If you do not clean the ezDispense compartment, detergent or softener will
be remained in the connected hose.
· Using this function may cause some foam in the drum.
1 Wash the ezDispense compartment that
needs to be cleaned. Please refer to Cleaning the Appliance Periodically &
Performing an Emergency Water Evacuation in MAINTENANCE chapter for further
details.
2 Fill the water in compartment to be cleaned up
to the MAX line.
NOTE
· Once this function is set, all buttons are locked except the Power button.
· When the controls are locked, [L and the
remaining time are alternatively shown on the display during the wash while
this function is engaged. · Turning off the power will not reset this
function. You must deactivate this function before you can access any other
functions.
Locking the Control Panel
1 Turn on the power.
2 Press and hold the Delay End and Add Item
buttons at the same time for 3 seconds to activate this function.
· A beeper will sound, and CL will appear on
the display.
Unlocking the Control Panel
1 Turn on the power.
global_main.book.book Page 36 Monday, July 19, 2021 6:36 PM
36 OPERATION
2 Press and hold the Delay End and Add Item
buttons at the same time for 3 seconds to deactivate this function.
Beep On/Off This appliance plays a melody when it starts and stops. · Press
and hold the TurboWash and Pre Wash
buttons simultaneously for 3 seconds to deactivate/activate this function.
global_main.book.book Page 37 Monday, July 19, 2021 6:36 PM
ENGLISH
SMART FUNCTIONS 37
SMART FUNCTIONS
LG ThinQ Application
The LG ThinQ application allows you to communicate with the appliance using a
smartphone.
LG ThinQ Application Features
Communicate with the appliance from a smartphone using the convenient smart
features.
Remote Start It allows you to control the appliance remotely from the LG ThinQ
application.
Download Cycle You can download new and special cycles that are not included
in the basic cycles on the appliance. A variety of specialty cycles specific
to the appliance can be downloaded to the successfully registered appliances.
Once cycle download is completed in the appliance, the appliance keeps the
downloaded cycle until a new cycle is downloaded.
NOTE
· Only one downloaded cycle can be stored on the appliance at a time.
Tub Clean Coach This function shows how many cycles remain before it is time
to run the Tub Clean function.
Energy Monitoring This function checks the energy consumption of the recently
used cycles and monthly average.
Smart Diagnosis This function provides useful information for diagnosing and
solving issues with the appliance based on the pattern of use.
Settings Allows you to set various options on the appliance and in the
application.
Push Alert When the cycle is complete or the appliance has problems, you have
the option of receiving push
notifications on a smartphone. The notifications are triggered even if the LG
ThinQ application is off.
NOTE
· If you change your wireless router, Internet service provider, or password,
delete the registered appliance from the LG ThinQ application and register it
again.
· The application is subject to change for appliance improvement purposes
without notice to users.
· Functions may vary by model.
Before Using LG ThinQ Application
1 Check the distance between the appliance and
the wireless router (Wi-Fi network). · If the distance between the appliance
and
the wireless router is too far, the signal strength becomes weak. It may take
a long time to register or installation may fail.
2 Turn off the Mobile data or Cellular Data on
your smartphone.
global_main.book.book Page 38 Monday, July 19, 2021 6:36 PM
38 SMART FUNCTIONS
3 Connect your smartphone to the wireless
router.
· If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and register the product again.
NOTE
· To verify the Wi-Fi connection, check that f icon
on the control panel is lit.
· The appliance supports 2.4 GHz Wi-Fi networks only. To check your network
frequency, contact your Internet service provider or refer to your wireless
router manual.
· LG ThinQ is not responsible for any network connection problems or any
faults, malfunctions, or errors caused by network connection.
· If the appliance is having trouble connecting to the Wi-Fi network, it may
be too far from the router. Purchase a Wi-Fi repeater (range extender) to
improve the Wi-Fi signal strength.
· The Wi-Fi connection may not connect or may be interrupted because of the
home network environment.
· The network connection may not work properly depending on the Internet
service provider.
· The surrounding wireless environment can make the wireless network service
run slowly.
· The appliance cannot be registered due to problems with the wireless signal
transmission. Unplug the appliance and wait about a minute before trying
again.
· If the firewall on your wireless router is enabled, disable the firewall or
add an exception to it.
· The wireless network name (SSID) should be a combination of English letters
and numbers. (Do not use special characters.)
· Smartphone user interface (UI) may vary depending on the mobile operating
system (OS) and the manufacturer.
Installing the LG ThinQ Application
Search for the LG ThinQ application from the Google Play Store or Apple App
Store on a smartphone. Follow instructions to download and install the
application.
Using the Appliance Remotely
Remote Start Use a smartphone to control your appliance remotely. You can also
monitor your cycle operation so you know how much time is left in the cycle.
Using this function
1 Put the clothes into the drum.
· If desired, add bleach or fabric softener to the appropriate areas of the
dispenser.
2 Press the Power button.
3 Press and hold Remote Start button for 3
seconds to enable the remote control function.
4 Start a cycle from the LG ThinQ application on
your smartphone.
NOTE
· Once this function is enabled, you can only start a cycle from the LG ThinQ
smartphone application. If the cycle is not started, the appliance will wait
to start the cycle until it is turned off remotely from the application or
this function is disabled.
· If the door has been opened, you can not start a cycle remotely.
global_main.book.book Page 39 Monday, July 19, 2021 6:36 PM
ENGLISH
SMART FUNCTIONS 39
Disable this function manually When this function is activated, press and hold the Remote Start button for 3 seconds.
Wireless LAN Module Specifications
Model
LCW-007
Frequency Range
2412 MHz to 2472 MHz
Output Power (Max.)
IEEE 802.11 b: 17.59 dBm IEEE 802.11 g: 17.39 dBm
IEEE 802.11 n (HT20): 16.64 dBm
IEEE 802.11 n (HT40): 17.05 dBm
Wireless function S/W version: V 1.0
For consideration of the user, this device should be installed and operated
with a minimum distance of 20 cm between the device and the body.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to opensource@lge.com. This
offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
Smart Diagnosis
This feature is only available on models with the c or d logo.
Use this feature to help you diagnose and solve problems with your appliance.
NOTE
· For reasons not attributable to LGE’s negligence, the service may not
operate due to external factors such as, but not limited to, Wi-Fi
unavailability, Wi-Fi disconnection, local app store policy, or app
unavailability.
· The feature may be subject to change without prior notice and may have a
different form depending on where you are located.
Using LG ThinQ to Diagnose Issues
If you experience a problem with your Wi-Fi equipped appliance, it can
transmit troubleshooting data to a smartphone using the LG ThinQ application.
· Launch the LG ThinQ application and select the
Smart Diagnosis feature in the menu. Follow the instructions provided in the
LG ThinQ application.
Using Audible Diagnosis to Diagnose Issues
Follow the instructions below to use the audible diagnosis method. · Launch
the LG ThinQ application and select the
Smart Diagnosis feature in the menu. Follow the instructions for audible
diagnosis provided in the LG ThinQ application.
1 Press the Power button to turn on the
appliance. · Do not press any other buttons.
global_main.book.book Page 40 Monday, July 19, 2021 6:36 PM
40 SMART FUNCTIONS
2 Place the mouthpiece of your smartphone
close to the c or d logo.
Max. 10 mm
Max. 10 mm
3 Press and hold the Temp. button for 3 seconds
or longer while holding the smartphone mouthpiece to the logo until the data
transfer is complete. · Keep the smartphone in place until the data
transfer has finished. Time remaining for data transfer is displayed.
4 After the data transfer is complete, the
diagnosis will be displayed in the application.
NOTE
· For best results, do not move the smartphone while the tones are being
transmitted.
ENGLISH
global_main.book.book Page 41 Monday, July 19, 2021 6:36 PM
MAINTENANCE
MAINTENANCE 41
WARNING
· Unplug the appliance before cleaning to avoid the risk of electric shock.
Failure to follow this warning may result in serious injury, fire, electric
shock, or death.
· Never use harsh chemicals, abrasive cleaners, or solvents to clean the
appliance. They may damage the finish.
Cleaning After Every Wash
What to Clean
Always remove items from the washing machine as soon as the cycle is complete.
Leaving damp items in the washing machine can cause wrinkling, colour
transfer, and odour.
· After the wash cycle is finished, wipe the door and door seal to remove any
moisture.
· Leave the door slightly open to dry the drum.
· Wipe the appliance with a dry cloth to remove any moisture.
Cleaning the Exterior
Proper care of your appliance can extend the service life.
Exterior
· Immediately wipe off any spills. · Wipe with a damp cloth and then again
with a
dry cloth ensuring there is no moisture in cabinet joints or crevices. · Do
not press on the surface or the display with sharp objects.
Door
· Wash with a damp cloth on the outside and inside and then dry with a soft
cloth.
WARNING
· Do not attempt to separate any panels or disassemble the appliance. Do not
apply any sharp objects to the control panel in order to operate the
appliance.
WARNING
· Leave the door open to dry inside of the appliance only if the children are
supervised at
home.
global_main.book.book Page 42 Monday, July 19, 2021 6:36 PM
42 MAINTENANCE
Cleaning the Appliance Periodically & Performing an Emergency Water Evacuation
Tub Clean
This is a special function to help clean the inside of the appliance by
soaking, washing, rinsing and spinning. Run this function once a month (or
more often if needed) to reduce build-up of detergent and softener and other
residue.
· If there is a bad smell or mildew inside the appliance, run this function
once a week for 3 weeks in addition to the regularly prompted intervals.
NOTE
· The tcL message will be displayed to alert to the
recommendation of operating this function.
1 Remove any clothing or items from the
appliance and close the door.
WARNING
· Leave the door open to dry inside of the appliance only if the children are
supervised at home.
Cleaning the Water Inlet Filter
The water inlet filter collects lime or any sediment that may be in water that
is supplied to the appliance. Clean the inlet filter every six months or so,
or more often if the water is very hard or contains traces of limescale. ·
Turn off the water supply taps to the appliance if
the appliance is to be left for a certain period of time (e.g. holiday),
especially if there is no floor drain (gully) in the immediate vicinity.
· 1E error message will be displayed on the
control panel when the water is not entering the detergent drawer.
1 Turn off the power and the water tap and then
unscrew the water inlet hose.
2 Open the dispenser drawer and add anti
limescale powder to the main wash compartment. · Tablets can be placed
directly into the drum
as an alternative to powder.
3 Close the dispenser drawer slowly.
2 Remove the water inlet filter with small pliers
and then clean the filter using a medium bristle tooth brush.
4 Turn on the power, and then select the Tub
Clean.
5 Press the Start/Pause button to start.
6 Leave the door open to dry the inside of the
appliance completely. · When the inside of the appliance is not dried
completely, it may cause a bad smell or mildew.
ENGLISH
global_main.book.book Page 43 Monday, July 19, 2021 6:36 PM
MAINTENANCE 43
Cleaning the Drain Pump Filter and Performing an Emergency Water Evacuation
The drain filter collects threads and small objects that may have been
accidentally left in the clothes. Make sure that the filter is clean every six
months to ensure smooth running of your appliance. Allow the water to cool
before cleaning the drain pump filter. Open the door in an emergency or
perform an emergency water evacuation.
1 Unplug the appliance.
2 Open the cover cap and pull out the drain tube.
CAUTION
· Be careful when draining, as the water may be hot.
· Run the drum cleaning programme once a month (or more often, as needed) to
remove excess detergent and other debris.
Cleaning the ezDispense Drawer
Clean the ezDispense compartments every time you refill the detergent/softener
or change to a new type of detergent/softener. Remove and clean the detergent
dispenser drawer once or twice a month. Leaving detergent in the detergent
dispenser drawer for an extended period or using the washing machine for a
long time may cause the build-up of residue in the detergent dispenser drawer.
3 Remove the drain plug from the drain tube first
a, and then drain the water. Then slowly unscrew the drain pump filter b to
drain the
remaining water and then proceed to remove any debris or objects from the
filter.
WARNING
· Do not spray water inside the washing machine. Doing so may cause fire or
electric shock.
1 Turn off the washing machine, and unplug the
power cord.
2 Pull out the detergent dispenser drawer until it
stops.
3 Press down the disengage button a to
completely remove the drawer.
4 After cleaning the drain pump filter, carefully
reinsert the filter and screw the drain cap back in clockwise carefully to
avoid cross threading and leakage. Reinsert the plug back into the drain tube
and place the tube into its holder.
5 Close the cover cap.
global_main.book.book Page 44 Monday, July 19, 2021 6:36 PM
44 MAINTENANCE
4 Open the lids.
8 Securely close the covers on the ezDispense
compartments.
5 Clean the inserts with warm water.
· Rinse the drawer in warm water to dissolve the detergent residue or softener
scale.
· Use a soft cloth or brush to remove any residue.
· Do not use soap when cleaning the drawer and inserts.
9 Wipe off any moisture with a dry towel or cloth
after cleaning.
10 Reinsert the detergent dispenser drawer.
6 If the detergent or softener is hardened inside
the ezDispense compartments, remove the covers on the drawer.
7 Clean the insides of the compartments with
warm water.
· Use a soft cloth or brush to clean and to remove any residue.
· Do not use soap when cleaning the drawer and inserts.
global_main.book.book Page 45 Monday, July 19, 2021 6:36 PM
TROUBLESHOOTING 45
TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following
tables contain possible causes and notes for resolving an error message or
malfunction. It is recommended to read the tables carefully below in order to
save your time and money that may cost for calling to LG Electronics service
centre.
ENGLISH
Before Calling for Service
Your appliance is equipped with an automatic error-monitoring system to detect
and diagnose problems at an early stage. If the appliance does not function
properly or does not function at all, check the following tables before
calling to LG Electronics service centre.
Error Messages
Symptoms
1E
INLET ERROR
UE
UNBALANCE ERROR
Possible Cause & Solution
Water supply is not adequate in that location. Water does not enter appliance
or it enters slowly.
· Check another tap in the house.
Water supply tap is not completely open. Water does not enter the appliance or
it enters slowly.
· Open fully tap.
Water supply hose(s) are kinked.
· Straighten hose or reinstall the water inlet hose
The filter of the supply hose(s) are clogged.
· Check and clean the inlet valve filter after turning off the taps and
removing the hose connections to the washing machine.
The appliance has a system which detects and corrects the unbalance of the
appliance.
· The clothes may be too wet at the end of the cycle, rearrange the load to
allow proper spinning. Close the door and press Start/Pause button. It may
take a few moments before the appliance begins to spin. The door must be
locked before spin can be achieved.
Load is too small. This system may stop spinning or even interrupt the spin
cycle altogether if individual heavy articles (e.g. bath mat, bath robe, etc.)
are loaded.
· Add 1 or 2 similar items or smaller articles of clothes to help balance the
load. Close the door and press Start/Pause button. It may take a few moments
before the appliance begins to spin. The door must be locked before spin can
be achieved.
global_main.book.book Page 46 Monday, July 19, 2021 6:36 PM
46 TROUBLESHOOTING
Symptoms
Possible Cause & Solution
OE
WATER OUTLET ERROR
Drain hose is kinked or clogged. Water in the appliance does not drain or
drains slowly.
· Clean and straighten the drain hose.
The drain filter is clogged. · Check and clean the drain filter.
dE dE1 dEz dE4
DOOR ERROR
Door sensor malfunctions.
· Please call LG service centre. You can find your local LG service centre
phone number in the warranty card.
tE
CONTROL ERROR
This is a control error. · Unplug the power plug and call for service.
LE
Over load in motor.
MOTOR LOCKED ERROR · Let the appliance wait for 30 minutes until the motor is cooled down and then, restart the cycle.
FE
OVERFLOW ERROR
Water overfills due to a possible faulty water valve. · Close the water tap. Unplug the power plug. Call for service.
PE
PRESSURE SENSOR ERROR
Water level sensor malfunctions. · Close the water tap. Unplug the power plug. Call for service.
vs
VIBRATION SENSOR ERROR
Vibration sensor malfunctions. · Call for service.
FF
FROZEN FAILURE
Is supply/drain hose or drain pump frozen?
· Supply warm water into the drum in order to unfreeze the drain hose and the
drain pump. Cover the supply hose with wet and warm towel.
AE
WATER LEAKAGE
Water leaks. · Call for service.
PF
POWER FAILURE
Power failure or inadequate electrical service may have occurred during
operation.
· Press the Start/Pause button to restart the cycle.
ENGLISH
global_main.book.book Page 47 Monday, July 19, 2021 6:36 PM
TROUBLESHOOTING 47
ezDispense Error Messages
Symptoms
E d1
ezDispense ERROR 1
E dz
ezDispense ERROR 2
E d3
ezDispense ERROR 3
E d4
ezDispense ERROR 4
E ds
ezDispense ERROR 5
O PN
ezDispense OPEN ERROR
Possible Cause & Solution
The amount of liquid detergent in the detergent compartment did not decrease.
After putting the detergent into the detergent compartment, it was left for a
long time and the detergent hardened.
· Clean the detergent compartment thoroughly, fill it with liquid detergent,
install it in the drawer, and run a wash cycle. If E d1 is displayed
continuously, call for service.
The amount of liquid detergent in the detergent compartment did not decrease.
· Call for service.
The amount of fabric softener in the liquid fabric softener or liquid
detergent compartment did not decrease. After putting the fabric softener into
the liquid fabric softener or liquid detergent compartment, it was left for a
long time and the fabric softener hardened.
· Clean the liquid fabric softener or liquid detergent compartment thoroughly,
fill it with liquid fabric softener, install it in the drawer, and run
a wash cycle. If E d3 is displayed continuously, call for service.
The amount of liquid fabric softener in the liquid fabric softener or liquid
detergent compartment did not decrease.
· Call for service.
The amount of liquid detergent or fabric softener in the liquid fabric
softener or liquid detergent compartment did not decrease.
· Call for service.
The washer was operated without completely closing the drawer. The drawer was
opened during the washer operation.
· Push the drawer completely closed. If O PN is displayed continuously, call
for service.
Noises You Might Hear
Symptoms
Rattling and clanking noise
Possible Cause & Solution
Foreign objects, such as keys, coins, or safety pins may be in the drum. ·
Stop the appliance, check the drum for foreign objects. If the noise
continues after the appliance is restarted, call for service.
global_main.book.book Page 48 Monday, July 19, 2021 6:36 PM
48 TROUBLESHOOTING
Symptoms Thumping sound
Vibrating noise
Possible Cause & Solution
Heavy clothes may produce a thumping sound. This is usually normal. · If the
sound continues, the appliance is probably out of balance. Stop and
redistribute the clothes.
The clothes may be out of balance. · Pause the programme and redistribute the
clothes after the door unlocks.
Package materials are not removed. · Remove package materials.
The clothes may be unevenly distributed in the drum. · Pause the programme and
redistribute the clothes after the door unlocks.
Not all levelling feet are resting firmly and evenly on the floor. · See the
Levelling the Appliance instruction to adjust the levelling of the
appliance.
Floor not rigid enough. · Check if the floor is sold and does not flex. See
the Installation Place
Requirements to select the proper location.
Operation
Symptoms Water is leaking.
Possible Cause & Solution
House drain pipes are clogged. · Unclog waste pipes. Contact plumber if
necessary.
Leakage is caused by improper installation of drain hose or clogged drain
hose. · Clean and straighten the drain hose. Check and clean the drain filter
regularly.
Drain pump filter cap is not fitted correctly. · Refit the drain pump filter.
global_main.book.book Page 49 Monday, July 19, 2021 6:36 PM
TROUBLESHOOTING 49
ENGLISH
Symptoms Appliance does not operate.
Appliance does not operate.
Buttons may not function properly. Door does not open.
Possible Cause & Solution
Control panel has powered off due to inactivity. · This is normal. Press the
Power button to turn the appliance on.
Appliance is unplugged. · Make sure that the cord is plugged securely into a
working outlet.
Water supply is turned off. · Turn the water supply tap completely.
Controls are not set properly. · Make sure that the programme is correctly
set. Close the door and press
the Start/Pause button.
Door is open. · Close the door and make sure that nothing is caught under the
door
preventing it from closing completely.
Circuit breaker/fuse is tripped/blown. · Check house circuit breakers/fuses.
Replace fuses or reset breaker. The
appliance should be on a dedicated branch circuit. The appliance will resume
the programme where it stopped once power is restored.
Control needs to be reset. · Press the Power button, then reselect the desired
programme and press
the Start/Pause button.
Start/Pause was not pressed after a programme was set. · Press the Power
button, then reselect the desired programme and press
the Start/Pause button. The appliance is turned off if the Start/Pause button
is not pressed within a certain time.
Extremely low water pressure. · Check another tap in the house to make sure
that household water
pressure is adequate.
Appliance is heating the water or making steam. · The drum may stop operating
temporarily during certain cycles, while
water is safely heated to a set temperature.
The Child Lock option is activated. · Deactivate the Child Lock option if
necessary.
The door cannot be opened for safety reasons once the appliance starts.
· This is normal. You can safely open the door after H turns off.
global_main.book.book Page 50 Monday, July 19, 2021 6:36 PM
50 TROUBLESHOOTING
Symptoms
Possible Cause & Solution
Appliance is not filling Inlet filter clogged.
properly.
· Make sure the inlet filters on the fill valves are not clogged.
Inlet hoses may be kinked. · Check that inlet hoses are not kinked or clogged.
Insufficient water supply. · Make sure that both hot and cold water taps are turned on all the way.
Hot and cold supply hoses are reversed. · Check supply hose connections.
Appliance does not drain water.
Kinked drain hose. · Ensure that the drain hose is not kinked.
Drain located higher than 1.2 m above the floor.
· Make sure that the drain hose is no higher than 1.2 m above the bottom of
the appliance.
Detergent is not dispensed completely or not dispensed at all.
Too much detergent is used. · Follow the guidelines provided by the detergent
manufacturer.
Drain Pump Filter may be blocked. · Clean the Drain filter.
Cycle time is longer than usual.
The load is too small. · Add more items to allow the appliance to balance the loads.
Heavy articles are mixed with lighter items.
· Always try to wash articles with similar weight in order to allow the
appliance to evenly distribute the weight of the load for spinning.
The load is out of balance. · Manually redistribute the load if articles have become tangled.
Cycle end is delayed
Unbalance is detected or suds removing programme is on.
· This is normal. The time remaining shown on the display is only an estimated
duration. Actual time may vary.
Performance
Symptoms Poor stain removal
Possible Cause & Solution
Previously set stains.
· Articles that have been previously washed may have stains which have been
set. These stains may be difficult to remove and may require hand washing or
pre-treating to aid in stain removal.
ENGLISH
global_main.book.book Page 51 Monday, July 19, 2021 6:36 PM
TROUBLESHOOTING 51
Symptoms Staining
Wrinkling
Possible Cause & Solution
Bleach or softener is dispensed too soon. · Dispenser compartment is
overfilled. It makes bleach or softer dispensed
rapidly. Always measure bleach or softener to prevent overfilling. · Close the
detergent dispenser slowly.
Bleach or softener was added directly to the clothes in the drum. · Always use
the detergent dispenser to ensure that bleach or softener is
properly dispensed at the right time in the programme.
Clothes were not properly sorted. · Always wash dark colours separately from
light colours and whites to
prevent discoloration. · Never wash heavily soiled items with lightly soiled
items.
Appliance is not unloaded promptly. · Always remove items from the appliance
as soon as the programme is
complete.
Appliance is overloaded. · The appliance can be fully loaded, but the drum
should not be tightly
packed with items. The door of the appliance should be closed easily.
Hot and cold water supply hoses are reversed. · Hot water rinse can set
wrinkles in garments. Check the supply hose
connections.
Spin speed may be too high. · Set the spin speed to suit the garment type.
Odour
Symptoms Musty or mildewy odour in appliance
Possible Cause & Solution
Inside of drum is not cleaned properly. · Run the Tub Clean function
regularly.
Odours can occur if the drain hose is not properly installed, causing
siphoning (water flowing back inside of the appliance). · When installing the
drain hose, make sure that it does not get kinked or
blocked.
If the detergent dispenser is not cleaned regularly, odours can occur from
mold or foreign substances. · Remove and clean the detergent dispenser,
especially the top and bottom
of the dispenser’s opening.
global_main.book.book Page 52 Monday, July 19, 2021 6:36 PM
52 TROUBLESHOOTING
ezDispense
Symptoms
Possible Cause & Solution
Refill Alarm continues to display when detergent/softener is added.
Detergent/softener has built up on the fluid level sensor.
· Open the compartment covers and clean the insides of the ezDispense
compartments with warm water. Use a soft brush to remove any residue. If the
Refill Alarm is displayed continuously, call for service.
The amount of detergent/softner is not enough for the sensor to detect. · Fill the detergent/softner up to the MAX line in the compartment.
Too much/too little detergent or softener dispensed.
The default dispense amounts setting may need to be changed. · Check and change the default dispense amounts setting.
The ezDispense doesn’t dispense detergent/ softener.
The ezDispense function is off. · Turn on the ezDispense function.
The ventilation holes are blocked. · Clean the ventilation holes for the lids
on the compartments with warm
water.
The detergent or softener in the ezDispense compartments has hardened.
· Clean the ezDispense compartments and change the detergent or softener.
There’s foam on the rinsing course, and there’s detergent left on the clothes after the washing.
Detergent was used when rinsing.
· Please make sure that the detergent/softner is stored correctly. (right:
detergent / left: softener)
After the washing, there’s a scum on the cloth.
You need to clean the inside of the ezDispense system.
· When using both dispensers for liquid detergent, make sure to run the
ezDispense Nozzle Clean in advance.
Detergent, softener leaks from the lid of the ezDispense compartments.
You need the ezDispense compartment’s horizontal maintenance. · Leakage occurs
when the ezDispense compartment is tilted. Slide the
ezDispense compartment out or in slowly and use both hands for safety.
The lid isn’t fully closed. · Securely close the lids to the ezDispense
compartments. Be careful not to
lose the lids.
global_main.book.book Page 53 Monday, July 19, 2021 6:36 PM
ENGLISH
TROUBLESHOOTING 53
Wi-Fi
Symptoms
Your home appliance and smartphone are not connected to the Wi-Fi network.
Possible Cause & Solution
The password for the Wi-Fi that you are trying to connect to is incorrect.
· Find the Wi-Fi network connected to your smartphone and remove it, then
register your appliance on LG ThinQ.
Mobile data for your smartphone is turned on. · Turn off the Mobile data of
your smartphone and register the appliance
using the Wi-Fi network.
The wireless network name (SSID) is set incorrectly. · The wireless network
name (SSID) should be a combination of English
letters and numbers. (Do not use special characters).
The router frequency is not 2.4 GHz.
· Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4
GHz and connect the appliance to the wireless router. To check the router
frequency, check with your internet service provider or the router
manufacturer.
The distance between the appliance and the router is too far. · If the
distance between the appliance and the router is too far, the signal
may be weak and the connection may not be configured correctly. Move the
location of the router so that it is closer to the appliance.
global_main.book.book Page 54 Monday, July 19, 2021 6:36 PM
Memo
global_main.book.book Page 55 Monday, July 19, 2021 6:36 PM
Memo
global_main.book.book Page 55 Monday, July 19, 2021 6:36 PM