Canac 33003169 Fundy Freestanding Bathtub Installation Guide

Canac 33003169 Fundy Freestanding Bathtub

Product Specifications

• Brand: TASSILI.CA
• Model: FUNDY NOIR BLACK 33003169
• Type: Freestanding Bathtub
• Color: Black
• Dimensions:
  • Length: 59″ (1520 mm)
  • Width: 47″ (1196 mm)
  • Height: 21″ (550 mm)

Installation Instructions

1. Place the bathtub on a protective mat to prevent surface damage.
2. After unpacking, remove the plastic pipe.
3. Install the bathtub in the desired location, ensuring it is level by adjusting the feet.
4. Use appropriate silicone for the surface type.
5. Align the drainage pipes and mark the floor for placement.
6. Apply silicone or adhesive on the marked area, consider the space left from the feet.
7. Allow silicone to harden for 24 hours before completing the installation.

Maintenance Instructions

1. Use a sponge, warm water, and soft soap for cleaning. Avoid corrosive chemicals, sanitizers, and abrasive cleaning products.
2. Polish the surface to maintain shine.
3. Clean chrome parts with soft soap.
4. Dry the bathtub with a soft cloth after use to prevent water stains.
5. If the drain is clogged, unscrew the cap to remove blockages.

FAQ – Frequently Asked Questions

• Q: Can I use harsh chemicals for cleaning?
  A: No, it is recommended to avoid corrosive chemicals, sanitizers, and aerosol cleaning products. Use only a sponge, warm water, and soft soap for cleaning.

• Q: How should I maintain the bathtub finish?
  A: Polish the surface regularly to keep it shiny. Clean chrome parts with a soft soap to prevent damage.

• Q: What should I do if the drain gets clogged?
  A: Simply unscrew the cap to remove any blockages that may be interrupting water flow.

FREESTANDING BATHTUB

59 ˜°⁄˝˙” X 29 ½” X 22 ˜°⁄˝˙” (152 CM X 75 CM X 58 CM)
FIBREGLASS-REINFORCED ACRYLIC INTEGRATED DRAIN AND OVERFLOW

WARNING

1. Before using this bathtub, you must carefully read these instructions and keep them for future reference.
2. To install this bathtub, you must access the pipes located in the floor under the bathtub.
3. Make sure the pipes required to bring water and to drain it are adequate at the place where you want to install the bathtub.
4. To extend the life of the bathtub, never use water at over 80°C (176°F).
5. To clean the bathtub, please see the section on maintenance.

*CAUTION

• The sizes provided herein are not intended as finished cut sizes. Never install unless you are in possession of the product. Measurements may vary as a result of improvements made to the product over time. Neither the manufacturer nor the distributor shall be liable for variances between the measurements shown here and the product’s actual measurements.
• This product should be installed by a certified professional, in accordance with the regulations in effect.

INSTALLATION

After unpacking the bathtub, take the plastic pipe out.

Install the bathtub at the chosen place. Turn it upside down. Adjust the feet so it is leveled and make sure they stand out from the frame at 1/8″ to 1/4” (3 mm to 6 mm) to avoid putting weight on the skirt of the tub. Once you have put the tub back on its feet, make sure they all rest on the floor and that everything is leveled.

Place the bathtub at the exact location where it will sit and align the drainage pipes (from the tub and on the floor). Mark the floor around the outside of the skirt. Apply a bead of silicone or adhesive on the mark you made on the floor. Don’t forget to take into account the space left from the feet. Put the tub back in its place and allow the silicone to harden for 24 hours before completing the installation.

• Connect the draining pipes so that the water drains properly.
• Once the installation is finished, make sure all connections are watertight.
• Protect the surface of the bathtub while proceeding to the installation to avoid damages.
• Finish with a bead of silicone to provide rigidity to the skirt and to close the gap between the bathtub skirt and the floor.

NOTE

1. Push on the drainer cap to close it and push it againto open it and drain the tub.

MAINTENANCE

1. Only use a sponge, warm water and soft soap. Avoid using corrosive chemicals, sanitizers and aerosol cleaning products. NEVER use scouring powders or abrasive pads. Some chemicals and cosmetic products for bathrooms may damage the finish.
2. Polish the surface to make it shiny.
3. Clean the chrome with a soft soap.
4. After having used the bathtub, dry it with a soft cloth to avoid water stains.
5. If the drain gets clogged, simply unscrew the cap to remove what interrupts water flow.

TASSILI LIMITED WARRANTY

NOVELCA offers a limited warranty for this TASSILI product (hereafter: the “Product”) with the conditions set out below and for the period specified from the date of purchase of the Product:

• This limited warranty is valid only for the original purchaser of the Product and it may not be transferred.
• The present limited warranty is not meant to exclude, restrict, limit or modify the legal warranty given by law to the purchaser of the Product.
• If the Product contains a manufacturing defect or if one or more parts of the Product is defective, the retailer commits to replace or repair, at its sole discretion, the defective part or parts without charge under the following cumulative conditions: 1) the purchaser must contact the retail store where the Product was purchased; 2) the purchaser must return the defective part or parts or the Product to the retailer; 3) the purchaser must provide the retailer the invoice as proof of purchase and date of purchase of the Product; 4) the purchaser must supply the Product identification information, including the serial number or the model number; and 5) the period covered by the limited warranty must not be expired. If the retailer decides to replace the defective part or parts, the replacement part or parts would be new or reconditioned, equivalent to new parts. The present limited warranty does not create any other obligation with the provider of the guarantee than those explicitly described above.
• This limited warranty is not applicable: 1) to consumable parts; 2) to normal wear; 3) when the Product is used for other purposes than what is described in the user guide (if any); 4) when the serial number or other identification information  of the Product is erased or withdrawn; 5) to damages that are only aesthetic and do not affect the normal use of the Product; 6) when the damages, defects, faults or other problems arise from: a) an inadequate maintenance of the Product; b) a faulty installation or assembly of the Product or an installation or assembly that is not in accordance with the user or installation guide (if one is provided); c) a modification, a repair or dismantling of the Product by a person not authorized by the retailer or the manufacturer; d) the transportation by the purchaser, his employee, officer or representative; e) a negligence by the purchaser, his employee, officer or representative; f) an accident; g) a case of force majeure or any event that is not caused by the Product itself.

FRENCH VERSION VS ENGLISH VERSION
In case of discrepancy between the French and the English versions of the text of this limited warranty, the French version shall prevail.

NOVELCA
5355, boul. des Gradins, Québec (Québec) Canada G2J 1C8

References

• Tassili Bains Douches Lavabos Robinets Mobilier Salle de Bains Tassili

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>