signify Nature Connect Link Lighting Solutions Installation Guide
- June 15, 2024
- signify
Table of Contents
signify Nature Connect Link Lighting Solutions
Specifications
- Input Voltage: 24V
- Output Current: 0.875A
- Timezone: UTC+01:00 (Belgrade, Bratislava, Budapest, Ljubljana, Prague)
Power Connection
To use the product, follow these steps for power connection:
- Make sure the product is turned off and unplugged.
- Locate the power input port on the product.
- Take the provided power cable and connect one end to the power input port.
- Connect the other end of the power cable to a compatible power source.
- Ensure the power source is turned on.
Timezone Configuration
The product supports multiple timezones. To configure the timezone, follow these steps:
- Power on the product.
- Access the product’s settings menu. Refer to the user manual for specific instructions on accessing the menu.
- Navigate to the timezone settings option.
- Select the appropriate timezone from the available options.
- Save the changes and exit the settings menu.
Troubleshooting
If you encounter any issues with the product, try the following troubleshooting steps:
- Ensure the power connection is secure and the power source is functioning.
- Check if the product’s display is showing the correct timezone.
- Reset the product by turning it off, unplugging it from the power source, and waiting for a few minutes before plugging it back in and turning it on again.
- If the issue persists, refer to the user manual for further troubleshooting steps or contact customer support for assistance.
Nature Connect link
Wall mounting
-
- Open the cover ****
-
Wiring ****
-
Set DIP switch for power supply of DALI_IN
-
Set the rotary switches for the time zone according the Time zone table
Time zone table
C D Time zone
| 0 | 0 | (UTC-08:00) Baja California |
|---|---|---|
| 0 | 1 | (UTC-08:00) Co-ordinated Universal Time-08 |
| 0 | 2 | (UTC-08:00) Paci c Time (US & Canada) |
| 0 | 3 | (UTC-07:00) Arizona |
| 0 | 4 | (UTC-07:00) Chihuahua, La Paz, Mazatlan |
| 0 | 5 | (UTC-07:00) Mountain Time (US & Canada) |
| 0 | 6 | (UTC-07:00) Yukon |
| 0 | 7 | (UTC-06:00) Central America |
| 0 | 8 | (UTC-06:00) Central Time (US & Canada) |
| 0 | 9 | (UTC-06:00) Easter Island |
| 1 | 0 | (UTC-06:00) Guadalajara, Mexico City, Monterrey |
| 1 | 1 | (UTC-06:00) Saskatchewan |
| 1 | 2 | (UTC-05:00) Bogota, Lima, Quito, Rio Branco |
| 1 | 3 | (UTC-05:00) Chetumal |
| 1 | 4 | (UTC-05:00) Eastern Time (US & Canada) |
| 1 | 5 | (UTC-05:00) Hai |
| 1 | 6 | (UTC-05:00) Havana |
| 1 | 7 | (UTC-05:00) Indiana (East) |
| 1 | 8 | (UTC-05:00) Turks and Caicos |
| 1 | 9 | (UTC-04:00) Asuncion |
| 2 | 0 | (UTC-04:00) Atlan c Time (Canada) |
| 2 | 1 | (UTC-04:00) Cuiaba |
| 2 | 2 | (UTC-04:00) Georgetown, La Paz, Manaus, San Juan |
| 2 | 3 | (UTC-04:00) San ago |
| 2 | 4 | (UTC-03:00) Araguaina |
| 2 | 5 | (UTC-03:00) Brasilia |
| 2 | 6 | (UTC-03:00) Cayenne, Fortaleza |
| 2 | 7 | (UTC-03:00) City of Buenos Aires |
| 2 | 8 | (UTC-03:00) Greenland |
| 2 | 9 | (UTC-03:00) Montevideo |
| 3 | 0 | (UTC-03:00) Punta Arenas |
| 3 | 1 | (UTC-03:00) Saint Pierre and Miquelon |
| 3 | 2 | (UTC-03:00) Salvador |
| 3 | 3 | (UTC) Co-ordinated Universal Time |
| 3 | 4 | (UTC+00:00) Dublin, Edinburgh, Lisbon, London |
| 3 | 5 | (UTC+00:00) Monrovia, Reykjavik |
| 3 | 6 | (UTC+00:00) Sao Tome |
| 3 | 7 | (UTC+01:00) Casablanca |
| 3 | 8 | (UTC+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna |
| 3 | 9 | (UTC+01:00) Belgrade, Bra slava, Budapest, Ljubljana, Prague |
| 4 | 0 | (UTC+01:00) Brussels, Copenhagen, Madrid, Paris |
| 4 | 1 | (UTC+01:00) Sarajevo, Skopje, Warsaw, Zagreb |
| 4 | 2 | (UTC+01:00) West Central Africa |
| 4 | 3 | (UTC+02:00) Athens, Bucharest |
| 4 | 4 | (UTC+02:00) Beirut |
| 4 | 5 | (UTC+02:00) Cairo |
| 4 | 6 | (UTC+02:00) Chisinau |
| 4 | 7 | (UTC+02:00) Damascus |
| 4 | 8 | (UTC+02:00) Gaza, Hebron |
| 4 | 9 | (UTC+02:00) Harare, Pretoria |
C D Time zone
| 5 | 0 | (UTC+02:00) Helsinki, Kyiv, Riga, So a, Tallinn, Vilnius |
|---|---|---|
| 5 | 1 | (UTC+02:00) Jerusalem |
| 5 | 2 | (UTC+02:00) Juba |
| 5 | 3 | (UTC+02:00) Kaliningrad |
| 5 | 4 | (UTC+02:00) Khartoum |
| 5 | 5 | (UTC+02:00) Tripoli |
| 5 | 6 | (UTC+02:00) Windhoek |
| 5 | 7 | (UTC+03:00) Amman |
| 5 | 8 | (UTC+03:00) Baghdad |
| 5 | 9 | (UTC+03:00) Istanbul |
| 6 | 0 | (UTC+03:00) Kuwait, Riyadh |
| 6 | 1 | (UTC+03:00) Minsk |
| 6 | 2 | (UTC+03:00) Moscow, St Petersburg |
| 6 | 3 | (UTC+03:00) Nairobi |
| 6 | 4 | (UTC+03:00) Volgograd |
| 6 | 5 | (UTC+03:30) Tehran |
| 6 | 6 | (UTC+04:00) Abu Dhabi, Muscat |
| 6 | 7 | (UTC+04:00) Astrakhan, Ulyanovsk |
| 6 | 8 | (UTC+04:00) Baku |
| 6 | 9 | (UTC+04:00) Izhevsk, Samara |
| 7 | 0 | (UTC+04:00) Port Louis |
| 7 | 1 | (UTC+04:00) Saratov |
| 7 | 2 | (UTC+04:00) Tbilisi |
| 7 | 3 | (UTC+04:00) Yerevan |
| 7 | 4 | (UTC+05:00) Ashgabat, Tashkent |
| 7 | 5 | (UTC+05:00) Ekaterinburg |
| 7 | 6 | (UTC+05:00) Qyzylorda |
| 7 | 7 | (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi |
| 7 | 8 | (UTC+05:30) Sri Jayawardenepura |
| 7 | 9 | (UTC+06:00) Dhaka |
| 8 | 0 | (UTC+06:00) Nur-Sultan |
| 8 | 1 | (UTC+06:30) Yangon (Rangoon) |
| 8 | 2 | (UTC+07:00) Bangkok, Hanoi, Jakarta |
| 8 | 3 | (UTC+07:00) Barnaul, Gorno-Altaysk |
| 8 | 4 | (UTC+07:00) Hovd |
| 8 | 5 | (UTC+08:00) Beijing, Chongqing, Hong Kong SAR, Urumqi |
| 8 | 6 | (UTC+08:00) Kuala Lumpur, Singapore |
| 8 | 7 | (UTC+08:00) Perth |
| 8 | 8 | (UTC+08:00) Taipei |
| 8 | 9 | (UTC+08:00) Ulaanbaatar |
| 9 | 0 | (UTC+08:45) Eucla |
| 9 | 1 | (UTC+09:00) Chita |
| 9 | 2 | (UTC+09:00) Osaka, Sapporo, Tokyo |
| 9 | 3 | (UTC+09:00) Pyongyang |
| 9 | 4 | (UTC+09:00) Seoul |
| 9 | 5 | (UTC+09:30) Darwin |
| 9 | 6 | (UTC+10:00) Brisbane |
| 9 | 7 | (UTC+10:00) Canberra, Melbourne, Sydney |
| 9 | 8 | (UTC+10:00) Guam, Port Moresby |
| 9 | 9 | (UTC+10:00) Hobart |
Connect to power
Test the connection with the luminaires by pressing the service button
- Press the “service” button to start the test
- Check luminaires
- Press the “service” button to finish the test
Timol configuration
Close the cover
Additional notes
- For reset to factory default settings: long press (10 seconds) on Service button.
- Recommended to use a firewall.
- Recommended to change the password at first use.
Service Tag: 12.910505103474
LED legend LED
- LED 1 (Red) Power status
- OFF when no power to the device
- ON when power is on
- LED 2 (Blue) Network status (only after booting finished)
- OFF when no network link
- BLINKING when network link available but no IP address assigned
- ON when network link available and IP address assigned
- LED 3 (Yellow) Internet/NTP status (only after booting finished)
- OFF when no internet
- BLINKING when internet available but NTP not available
- ON when internet and NTP available
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>