KICKSTARTER 2BFYX-STAR Spirok Star Ferrofluid Speaker User Manual
- June 1, 2024
- KICKSTARTER
Table of Contents
KICKSTARTER 2BFYX-STAR Spirok Star Ferrofluid Speaker
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Conditions: Must not cause harmful interference, must accept any received interference
Product Usage Instructions
Installation:
- Place the device on a stable surface.
- Ensure proper ventilation around the device.
- Connect the device to a power source using the provided cable.
Operation:
- Power on the device using the designated button.
- Follow the on-screen instructions to set up the device.
- Use the device according to its intended purpose.
Maintenance:
- Regularly clean the device with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or humidity.
- Do not attempt any changes or modifications without approval.
FAQ
- Q: What should I do if the device is not functioning properly?
- A: Check the power source, connections, and refer to the troubleshooting section in the user manual.
- Q: Can I use this device outdoors?
- A: It is recommended to use the device indoors to avoid exposure to harsh environmental conditions.
Product Overview
CONNECTING VIA Bluetooth (PAIRING)
WHEN TURN ON SPIROK SPEAKER THE DEFAULT MODE IS BLUETOOTH WAITING FOR PAIRING. THE BLUE INDICATOR STARTS TO BLINK.
- 001. ENABLE Bluetooth ON YOUR DEVICE (SMARTPHONE, TABLET, COMPUTER).
- 002. SELECT SPIROK STAR FROM THE Bluetooth LIST AND ACCEPT PAIRING. THE Bluetooth INDICATOR ON THE SPEAKER STOPS BLINKING AND REMAINS LIT WHEN THE UNITS ARE CONNECTED.
CONNECTING VIA USB/AUX
- 001. STORE AUDIO FILES ON A USB DRIVE AND PLUG IT INTO THE USB PORT. PRESS Mode BUTTON TO SELECT USB AS THE INPUT. THE SPEAKER WILL PLAY THE MUSIC FROM THE USB DRIVE.
- 002. SELECT AUX AS THE INPUT. CONNECT THE OTHER END OF THE LEAD TO THE AUDIO OUTPUT ON YOUR AUDIO SOURCE.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluated to meel general RF exposure requirement. The device can be used in porlable exposure condition without restriction.
SPIROK STAR
Copyright ©2024. All Rights Reserved. Manual Edition 1.0, April 2024 Printed in China Shenzhen Yixiu Technology Co., Ltd. Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>