KICKSTARTER Ultimate Potty Training Device User Manual
- June 1, 2024
- KICKSTARTER
Table of Contents
KICKSTARTER Ultimate Potty Training Device
Preparations
Check whether the wireless router is in normal use, and then connect the mobile phone to the network. If it is a dual-band router, please connect to a 2.4G WIFI network.
Install the test APP
- Please scan below QR Code to download “iPupPee”to your Android device.
- Open the “ipupPee”APP and register an account using your email. Tips: your password must be 8-16 characters, and at least contain the following three categories: numbers. Uppercase letters. Lowercase letters, special characters.
The device is placed from a position close to the router.
-
Enter your email address to register
-
Set your login password
-
Enter the verification code you received in your email
-
sign up successfully
-
Click “Add Device”
-
Click the image to add your device
The device is placed from a position close to the router.
-
Select setup mode
-
Long press the button behind the device to reset， The indicator flashes red and blue;
-
Select your WiFi network and enter your WiFi password
-
Use your device’s lens to scan QR code.
-
Wait for the connection.
-
Select the application scenario of your device.
-
Your device is now ready to work；
Warning
To assure continued compliance, any changes or modifications not expressly
approved by the party. Responsible for compliance could void the user’s
authority to operate this equipment.
FCC Statement
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled environments. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Specifications
- Product Name: iPupPeeto
- Compatibility : Android devices
- Network : Wi-Fi 2.4G
- Password Requirements: 8-16 characters, with numbers, uppercase letters, lowercase letters, and special characters
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter connection issues during setup?
A: Make sure you are close to the router, verify the Wi-Fi network and
password, and reset the device if needed.
Q: Can I use iPupPeeto with a dual-band router?
A: iPupPeeto is recommended for use with a 2.4G Wi-Fi network. If you have
a dual-band router, connect to the 2.4G network for optimal performance.