KICKSTARTER VIE ZONE Bluetooth Neuro Earphone User Manual
- June 12, 2024
- KICKSTARTER
Table of Contents
KICKSTARTER VIE ZONE Bluetooth Neuro Earphone
CONTENTS
How to wear
- Your ear and neck with use a wipe before use.
- Ch’xlse an ear tip tt*t hæ the IBt fit for your ears. (SnvVL)
- The sensors need to be kept clean for performance.
- You can use wipes to renew sebum from the after uæ,
- Place both the left and right neck censors securely around your neck.
Control
Zone a touch-sensing button on the right Of the rxk band, You can control your Zone by the following:
- Power On
- Long Press 3 Seconds
- Power Off
- Long Press 2 Seconds (When connected to the device)
- Long Prgs 5 seconds (When not connected to ffe device)
- Pairing Mode
- Long Press 1 Second (When powered m)
- Play stop
- Long Press 2 Seconds
- Take.’End Call
- Long Press 2 Seconds
- Next Song
- Tap 2 times
- call A1
- Tap 3 times
HOW to charge
- You can charge your Vte Zone using the USB Type-C cable and the adapter that came with your Zone.
- There is a limit of ampacity (5V-3,OA) are not compatible,)
- Please charge using chargers that carry up to DC 5V/2.4A.
Eartip
- Your Vie Zone uses special conductive eartips.
- Make sure to choose tips that provide the best fit for both your right and left ears, In order to best pick up your EEG signals, give them maximum contact with our ears by pushing them in deeply.
- You can keep them clean by storing them in their solutions in ttÉr cases.
- Please use dual-purpose (for cleaning and storage) contact solutions.
Pairing
iOS
- GO to the “VIE ZONE” app > Signal check.
- Tap “CONNECT WITH DEVICE” and select “VIE ZONE” to pair.
- Tap on it to hear “Connected” ,
- You should hear “Pairing successful” and see VIE ZONE under your devices,
Android
- Long press the button to get into the pairing mode (LED: Red/Blue flickering)
- Go to the Setting > Bluetooth of your smartphone, and Select the “VIE ZONE” tc pair the device.
- Go to “VIE ZONE” app > Signal check.
- Push “CONNECT WITH DEVICE” and select “VIE ZONE (Data)” to pair.
Download Link
Support and Warranty
The earphones are covered by a limited one-year warranty from the date of purchase.
Please visit our website or contact us by E-mail when you need support. http://vie.style/support/ MAIL : info@vie.style
FCC Warning
This device complies with 15 of the FCC Rules. Ospratlon Is sut*ect to the follmvlng two cmdltbns:
- This device may not cause harmful Interference, and
- this must accept any Interfereræ Interference mat may cause undesired operation.
Any changes or rnodtficatlons not expressly approved by the country responsible for compliance code the user authority to operate the equipment This has been tested and complies with the Ilmlts for a Class B dual device, under part 15 of the FCC Rules. These Ilmlts are deemed to be reasonable protection against harmful interference In a resl&ntlal Installation. This equipment generates uses and can radiate radio frequency energy aru If not used By the Instructions, may cause harmful interference However, there Is no guarantee that Interference will In a particular Installation. tf this equipt causes harmful interference to radio or televised which can be by tl. ruling the off and on, the 1-ær Is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relate the receiving antenna.
- Increase the separation of the equipment and receiver.
- Connect ttE equlprrwjt Into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio (IV technician for help.
The device has been evaluated to meet general RF requirements. The device can be used In portable exposure conditions without restriction.
- FCC ID : 2,409B-VlEE
- Model No : VIEE-10u
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>