KICKSTARTER AP301-PT10 Phone Toaster User Manual
- June 6, 2024
- KICKSTARTER
Table of Contents
**APRIL×STONE
Phone ToasTer
**
Mobile Phone Wireless Charging Ⅰ Sterilizer
Features
Mobile Phone Sterilization by UV-C LED!
6 UV-C LeDs are placed 360˚ to kill 99.9% of toxic bacteria from the mobile
phone in 5 minutes. UV-C LeD with strong sterilizing power destroys the Dna of
bacteria and viruses and neutralizes them. Phone ToasTer is designed in a
closed structure that blocks UV-C LeD, it is safe because the LeD will not
operate if the phone slot is not closed.
Mobile Phone Wired/Wireless Fast Charging!
at the same time as UV sterilization, the phone charges wirelessly at high
speed. Mobile phone sterilization and charging procedure at same time, so it
prevents bacteria and saves time. also, an UsB charging terminal is mounted,
it allows fast charging of the mobile phone via wire. It allows charging
multiple mobile phones quickly at the same time with wired/wireless fast
charging.
High Quality Bluetooth Speaker!
equipped with the latest version of Bluetooth 5.1 chipset, stable data
transmission with low power is possible with smart devices. With an output of
8W rated, various contents are reproduced more realistically. enjoy high-
quality audio by connecting wirelessly to smart devices such as smartphones,
tablets, and laptops.
Analog Alarm Clock!
The current time and alarm can be easily set using the dial, and the time can
be viewed even in dark places with the light switch.
Precautions for Safety
This is to keep the user safe and prevent property damage. Please read carefully before using the product and use it correctly.
Warning Failure to observe the warnings may result in death or serious injury.
Do not look directly at the UV-C LED or let UV rays hit your skin.
-
Direct contact with the light from the UV-C LeD may be harmful to the human body.
Do not touch the product or power adapter in operation with wet hands. -
electric shock may result.
Do not allow electro-conductive materials (i.e. metal, liquid, etc.) to come into contact with the power adapter or USB connection terminal. -
a fire may result from corrosion of the connection terminal or a temporary short circuit.
Do not place the product in a high-temperature environment, or near heat sources, heating cookware, or high-pressure containers. -
It may cause heat or fire in the product.
Be careful not to let children or pets suck or bite the product. -
There is a risk of suffocation due to damage on the product or small parts.
Do not disassemble, repair, or modify at your discretion. -
There is a risk of product failure or electric shock.
Caution Failure to observe the precautions may result in personal injury or property damage.
Do not drop the product or give strong impact to it.
-
The product may be damaged.
Do not apply excessive force to the sterilization/charging lever. -
The product may be damaged.
Do not force your phone into the slot. -
The product and mobile phone may be damaged.
Remove accessories such as thick cases and straps from the phone and insert it. -
The product may not operate normally.
Do not insert anything other than mobile phones into the product. -
The product may malfunction.
Do not use the product for any purpose other than its intended use. -
The product may malfunction.
Be careful when cleaning the product. -
Be sure to disconnect the power adapter before cleaning the product.
-
Do not put the product into water.
-
Do not use thinner, alcohol, or cleaning spray.
-
When cleaning the product’s connection terminal, wipe it with a cotton swab or soft cloth.
Product Composition and Specifications
Please check the components and specifications before using the product, and use it correctly.
Product Composition
Product Specifications
| Product Name | PHONE TOASTER |
|---|---|
| Model Name | AP301-PT10 |
| Sterilization Method | 6 UV-C LEDs (Max. 20,000 hours of use) |
| Input Power | DC 12 V, 2 A (Max. 30 W) |
__
Temperature
| Operation| -10 ℃ ~ 50 ℃
Storage| -40 ℃ ~ 85 ℃
Size (WxHxD)| 232 mm x 154 mm x 110 mm
Weight| PHONE TOASTER: 1180 g ± 20 g
Maximum Size of Mobile Phone| 80.8 mm x 172.3 mm x 11.9 mm
__**Wireless Charging| 9 V, 1.7 A, 15 W, Fast Charging Frequency: 125
KHz
USB Charging| USB-A Type, 9 V, 1.7 A, 18 W, Fast Charging
__**Bluetooth Speaker| 8 W/4 Ω, 5.0VER BDR, EDR Frequency: 2.4
GHz
Part Names and Functions
Front Side
| Number | Name | Functions |
|---|---|---|
| 1 | __ Speaker | Output the sound from a device connected via Bluetooth. |
| 2 | Volume Control Bar | Adjust the volume of the Bluetooth speaker. |
| 3 | Timer Setting Bar | Set the sterilization/charging time. |
| __**__** 4 | __**__** Status Light | Indicate Bluetooth, |
sterilization, and wireless charging status.
- : Indicate Bluetooth pairing
- : Indicate Sterilization
- : Indicate Wireless charging
5| Clock Light Switch| Turn the clock’s light on or off.
6| Bluetooth Connection Switch| __ Turn the Bluetooth connection on or
off.
7| Alarm Setting Dial| Set the alarm time.
8| Time Setting Dial| Set the current time.
Top/Left/Back Sides
| Number | Name | Functions |
|---|---|---|
| 1 | Mobile Phone Slot | Insert the phone for sterilization/wireless charging. |
| 2 | Alarm Stop Button | Turn off the alarm sound. |
| 3 | Sterilization/Charging Lever | Start or stop sterilization and wireless |
charging of the phone.
4| Power Button| Turn the product on or off.
5| USB Charging Terminal| Connect the USB-A cable to charge the phone.
6| Power Adapter Connection Terminal| Connect the power adapter to supply
power to the product.
Sterilization/Wireless Charging
This product is a mobile phone sterilizer using UV-C LeD. not only sterilizes the phone but also wirelessly charges it at the same time.
√ Check Before Use
- Make sure if the product is powered.
- Make sure if the Sterilization/Charging Lever is raised all the way.
- Make sure if the inside of the product is empty.
-
Place the mobile phone horizontally in the slot with its front-facing forward.
-
Use the Timer Setting Bar to set the sterilization/wireless charging time.
• It is set to quick mode when the Timer Setting Bar is lowered to the bottom, and sterilization proceeds for 5 minutes in quick mode.
• Sterilization proceeds for 15 minutes in normal mode.
• When the timer ends, the mobile phone comes up with the Sterilization/Charging Lever. -
Slowly lower the Sterilization/Charging, Lever, until a click sound is heard to fix it.
• The mobile phone slot is closed, and then it starts to sterilize and charge wirelessly. -
To stop during operation, press the Sterilization/Charging Lever again until a ‘click ’ sound is heard.
• The Sterilization/Charging Lever is raised and the operation stops.
• When the Sterilization/Charging Lever is down, the time does not change even if the Timer Setting Bar is adjusted.
• The product does not operate when the mobile phone slot is open, and it stops if the mobile phone slot is opened during operation.
Checking the operation status
It is possible to check the operation status through the LED indicator on the front of the product.
| (Sterilization) LED | (Wireless Charging) LED |
|---|---|
| • Standby for sterilization: LED off | • Standby for charging: LED |
off
• During sterilization: LED on (15 minutes)| • While charging: LED
on
• Sterilization completed: LED off| • Charging completed: LED on
• Operation error: LED blinks (quickly)| • Operation error: LED
blinks (quickly)
Using the Bluetooth Speaker
-
Turn on the **Bluetooth Connection Switch.
•** In the pairing standby status, the (Bluetooth) LED blinks slowly. -
Select ‘PHONE TOASTER’ on the device to be connected.
• When pairing is complete, the (Bluetooth) LED on with a beep sound.
• After the initial connection, turn on the Bluetooth Connection Switch to automatically connect with the last paired device.
• It is possible to connect to other devices via Bluetooth only when there is no device connected to the product or the Bluetooth connection is disconnected.
• When a Bluetooth device is already connected, pairing detection is not possible.
Using the Alarm Clock
Setting the time/alarm
Use the Time/Alarm Setting Dial to set the current time and alarm.
- When the power is cut off, the clock stops after running for a certain period of time, so you need to set the time again.
- If an alarm is set, it is possible to turn it off by pressing the Stop Alarm button. (The alarm does not sound when the button is being pressed.)
Turn on the clock light
If the surrounding is dark, it is possible to use the Clock Light Switch
to turn on the clock.
Wired Charging of Mobile Phone
✓Check before use
Make sure if the product is powered.
Connect the mobile phone to the USB Charging Terminal on the back of the
product using a standard USB cable.
Troubleshooting
| Problems | Confirmation and Measures |
|---|---|
| It does not operate at all. | Make sure the power is properly connected. |
The power is on, but the sterilization indicator does not light
up.| Make sure that the mobile phone slot on the top of the product is
closed well.
The mobile phone does not come out.| Remove the power and remove the
mobile phone manually with the slot opened.
The sterilization indicator is turned off after 15 minutes.| This
product is sterilized for up to 15 minutes. If further sterilization is
required, operate it again.
__
The charging indicator is off.
|
- For mobile phones with wireless charging functions, make sure if the phone is placed in the center of the slot with the phone facing the front.
- Remove the mobile phone case and insert it into the slot.
The foreign substance on the mobile phone has not disappeared.| This product operates only on the sterilization function and does not support the cleaning function.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are
not expressly approved by the manufacturer may void the user’s authority to
operate the equipment.
FCC Part 15.105
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation This equipment generates uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications, However, there is no guarantee that interference will
not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void your
authority to operate the equipment under FCC rules.
RF Radiation Exposure Statement :
This equipment complies with FCC RF Radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in
conjunction with any other antenna or transmitter.
- Name of Company: SK Networks Co., Ltd.
- Manufacturer / Country : Devatec Co., Ltd. / Korea
- Product Name: PHONE TOASTER
www.aprilstone.com
www.instagram.com/aprilstone_official
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>