ORALUCENT 2AWIY002 Blue and Red Light Toothbrush User Manual

ORALUCENT 2AWIY002 Blue and Red Light Toothbrush

LEGEND

SPECIFICATION

1. Material: 100 lb. Gloss book
2. Process: Manual_3 Folds
3. Unit: mm
4. FSC Requirement: No
5. Abrasion Resistance test : 3M Tape Test (QATMEH0010)
6. Storage Condition: Room Temperature
7. Expiry Date: 12Months
8. Must Meet 94/62/EC + TPCH Requirement
9. x Denotes Critical Dimension For IQC Inspection

WELCOME

Congratulations on taking charge of your dental health. Get ready to experience a whole new level of clean & bright. The Oralucent toothbrush harnesses advanced light technology that outshines conventional toothbrushes. Please read all instructions prior to first use. In just minutes, you’ll be on your way to enhanced oral health.

WHAT’S IN THE BOX?

• Oralucent toothbrush handle with built-in red and blue LED light
• Replaceable brush head
• Charging base
• Wall charging plug with USB port
• Toothbrush head cover

MAIN FEATURES

• EYE COMFORT TECHNOLOGY
  Patented technology increases light intensity while you brush, eliminating eye discomfort from bright light

• BLUE LIGHT TECHNOLOGY
  Uses the same type of blue light used in dental offices for whitening treatments.
  Note : When combined with optional Oralucent light-activated O, GEL (sold separately) antimicrobial and whitening benefits are accelerated

• RED LIGHT TECHNOLOGY
  Therapeutic red light has been shown to stimulate circulation and promote cellular renewal

• GENTLE BRISTLES
  The non-abrasive, soft premium bristles provide a gentle yet thorough clean

• CUSTOMIZABLE SPEED/MANUAL MODE
  To set your preferred speed/vibration level, start from OFF position and hold down button for 3 seconds to activate the looping speed ramp. Release button when preferred speed intensity is reached. Manual mode (no motor) is one option in the loop

• 2 MINUTE INDICATOR
  A double pulse will be felt after 2 minutes to indicate the minimum recommended brushing time. Note: Lights will stay on with continued brushing for up to 4 minutes, to encourage longer brushing time. Device will automatically turn off after 4 minutes

PREPARING FOR USE

Slide and push brush head onto handle until firmly in place. Position the charging base on a level, non-slippery surface in a convenient location near desired power source. Situate so the assembled brush and charging base are not in danger of falling or sliding into sink, as neither the charging base nor the unit should ever be submerged in water. Insert the metal end of the USB cable into the USB port of the wall charger provided then insert the wall charger into a standard power outlet.

CHARGING THE BRUSH

After connecting the charging base to a power source, place the toothbrush into the base. Before first use, charge brush for 4-8 hours. Neck of brush head will initially glow in red when low in charge and then will pulse in purple color as amount of charge increases. Purple will turn solid when fully charged. A full charge will last at least one week, assuming 2 minutes of brushing 3X a day. A red glow in brush neck indicates it is time to recharge. While not necessary, we recommend placing the unit in the charging dock after each use. Doing so will help it dry properly and maintain a secure, upright position. We recommend unplugging the USB cable when no charge is needed. Note: It is normal for the toothbrush handle to warm when charging.

OPERATING THE BRUSH

Your Oralucent toothbrush is easy to use. Wet bristles, apply a small amount of your favorite toothpaste and optional 02 Gel light- activated booster (sold separately). Press the button and begin brushing. The light will intensify to therapeutic levels as you brush. A double haptic pulse will indicate 2 minutes of brushing time has been reached. The lights and vibration will continue for 4 minutes, to encourage longer brushing time. Once brushing stops, lights automatically adjust to low level intensity. Press button to turn off.

SETTING MOTOR SPEED

To customize your speed/vibration intensity, start with the brush off, and hold button with your thumb for 3 seconds to activate the speed ramp. Once the desired level is reached, release your thumb from the button. Your preferred level will be locked into memory until reprogrammed. Note: To set to manual mode (no motor/ vibration, but with lights on), release button hold when the motor slows to a pause during the speed ramp cycle.

REPLACEABLE BRUSH HEADS

The American Dental Association recommends replacing brush heads every three months, at a minimum. Oralucent replaceable brush heads are designed exclusively for use with the Oralucent toothbrush. To maintain maximum effectiveness, it is important to replace them regularly – before they become worn.

Detaching the brush head

• Grip the brush handle firmly in one hand
• Use your other hand to pull brush head straight off the brush handle – do not twist.
• Wipe away any accumulated toothpaste and debris on the inner shaft with built-in light.

Attaching the brush head
Slide the open end of the brush head onto the handle shaft, aligning the brush head so the bristles face the same direction as the button on the handle, and push to secure. A click indicates the brush head is properly attached.

To protect brush heads against premature wear or damage, follow these tips:

• Rinse brush heads well after each use.
• Never rinse the brush heads with hot water.
• Doing so may damage the bristles or brush head.
• Do not exert unnecessary pressure while brushing.
• Use only the amount of pressure required to maintain contact with your teeth and gums.
• Allow brush heads to air dry thoroughly between uses.
• To reorder brush heads, 02 Gel light-activated booster or any Oralucent products, visit Oralucent.com or call 877-379-8781.

Cleaning and Storage

After each use
Rinse the brush head thoroughly under running water until it is free of all remaining toothpaste and debris. If necessary, wipe clean your unit with a damp, soft cloth. Allow to air dry upright in charging base.

Storing Product
Disconnect the charging base from power outlet and wipe clean with a soft, damp cloth. Allow all parts to dry before reconnecting. Keep the unit, charging base and wall charger in a dry place, away from children. Use only the Oralucent charger to recharge your Oralucent toothbrush. This appliance contains a rechargeable battery that is non-replaceable.

TROUBLESHOOTING

• Problem : Toothbrush is not charging
  Possible cause: Toothbrush may not be properly inserted into the charging dock or charging base may not be connected to a power source.
  Solution: Confirm that toothbrush is fully inserted into the charging base. Check that the charging base is connected to a power source. A red glow in neck indicates charging is low but in process. Neck color will turn to purple when charge is increased.

• Problem : Toothbrush will not operate
  Possible cause: Toothbrush may require charging.
  Solution: Check that toothbrush has sufficient charge – A purple glow in neck confirms.

• Problem : Light is coming on when button has not been pressed

• Possible cause: Inner shaft underbrush head may have accumulated water, debris or residual toothpaste and /or gel.
  Solution: Remove brush head and wipe inner shaft clean and dry. If lights continue to come on outside of mouth, contact Customer Care. Problem: Light is not staying on while brushing Possible cause: Bristles may not be saturated with water. Solution: Check that bristles are thoroughly wet and maintain a firm grip on the handle while brushing. If lights are still not coming on after brushing for 10 seconds, contact Customer Care.

• Problem : Preferred speed setting is difficult to reach
  Possible cause: Button may not have been held down for a full 3 seconds (Starting from the off position)
  Solution: Press down button with thumb until looping speed ramp is activated. Once desired speed, or no motor setting for manual mode, is reached, release the button and setting will lock in.

• Problem : Increased pressure is required when brushing for sufficient cleaning
  Possible cause: Brush head may be worn or damaged.

• Solution: Replace the brush head at least every three months, as recommended by the American Dental Association.

WARRANTY

Your Oralucent toothbrush has a 1-year warranty from the date of purchase.
Within the warranty period and with proof of purchase, we will replace the complete appliance, free of charge, for any defects in the appliance resulting from faults in materials or workmanship.

If the unit is damaged, or if the product fails to function, do not dismantle, exchange, or manipulate any part of it, as there is risk of electric shock. If malfunction cannot be remedied by following the troubleshooting tips, discontinue use and contact Oralucent Customer Care at customercare@oralucent.com or 877-379-8781.

Exclusions:

Brush heads

• Damage due to improper use
• Defects that have a negligible effect on the value or operation of the appliance
• Damage due to unauthorized repair
• Normal wear and tear, including chips, scratches, abrasions, discoloration or fading.
• Damage caused disassembling the product, damage caused by using an attachment not made by Oralucent, or damages caused by negligence.

Caution : Changes or modifications not expressly approved by Oralucent, Inc. could void the user’s authority to operate the equipment.
Note : This toothbrush has been tested and is compliant with safety standards for electromagnetic devices.

To obtain service within the warranty period, contact Customer Care at customercare@oralucent.com or 877-379-8781 for a Return Merchandise Authorization (RMA) number and return shipping address and instructions. Do not return to the address on the original packaging.

DISCLAIMER
This product is not intended to diagnose, cure or prevent any disease. Oralucent, Inc. makes no claims, representations or warranties regarding the ability of this product to cure any physical ailments. A qualified health professional should be consulted with regards to any condition requiring medical attention.

IMPORTANT NOTICES

The appliance is not to be used by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Unsupervised children should not play with the appliance. This toothbrush is not intended for use by children under 12 years of age.
The product is a personal oral care device and is not intended for sharing among multiple users. Utilize this product only for its intended use as described in this user manual. Discontinue the use of product if it appears damaged in any way.

Consult your dental professional before using the product if:

• You have had oral surgery within the last 60 days.
• You are currently receiving gum treatment or treatment for any oral condition.
• You are taking light sensitive medications such as aminolaevulinic acid or porphyrin- containing medications or have sensitivity to light.
• If pregnant or nursing, before using any product containing peroxide, such as optional Oralucent O2 Gel.

WARNINGS AND SAFEGUARDS

Do not

• Submerge the device or charging dock in water or use while in bath or shower.
• Position the device or charging dock in a wet area or where it is in danger of being submerged in water.
• Touch the USB port or plug with wet or damp hands.
• Attempt to open the device, repair or replace the battery. The device is not user serviceable.
• Drop the device or charging base. Do not attempt to use if unit has been accidentally dropped as it may have been damaged and subject to malfunction. Use the charging dock if cord/plug is damaged expose the charging cord to heated surfaces or heat sources.

This product contains a lithium-ion battery that must be disposed of properly according to local laws and regulations, and not as household waste. When the product reaches its end of life, check into your state and municipal disposal and recycling options.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>