ORALUCENT 2AWIY002 Toothbrush User Manual
- June 1, 2024
- Oralucent
Table of Contents
ORALUCENT 2AWIY002 Toothbrush
Specifications:
- Material: 100 lb. Gloss book
- Printing: Double Side Black Printing
- Unit: mm
- FSC Requirement: No
- Abrasion Resistance test: 3M Tape Test(QATMEH0010)
- Storage Condition: Room Temperature
- Expiry Date: 12 Months
- Must Meet 94/62/EC + TPCH Requirement
- Denotes Critical Dimension For IQC Inspection
ORALUCENT Product Warning Information
- Charge only with approved adapters with input ratings (100-240 V~ 50/60 Hz; 0.2A Max) and output ratings (5 Vdc; 1000mA).
- Discontinue use if this product appears damaged in any way (brush head, handle, and/or USB cable).
- This product is designed to clean your teeth, gums and tongue only. Use this product only for its intended use as described in this user manual. Discontinue use of this product and contact a physician/dentist if discomfort or pain is experienced.
- This product may be used by children and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision.
- Children shall not play with the product.
- Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
LEGEND
Questions?
877-379-8781
oralucent.com
ORSAFETY/v-1
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiofTV technician for help.
Charging process in charging model:
To maintain compliance with FCC’s RF exposure guidelines, the distance must be
at least 20cm between the radiator and your body, and fully supported by the
operating and installation configurations of the transmitter and its
antenna(s).
Battery Safety Instructions
- Only use this toothbrush for its intended purpose and follow the general and battery safety instructions as described in this user manual. Any misuse can cause electric shock, burns, fire and other hazards or injuries.
- Use temperature: 0°C-40°C, Store the product at a temperature between – 40°C and + 1o·c
- To charge the battery, only use the USB cable provided with the product. Do not use an extension cord.
- If the product becomes abnormally hot, gives off an abnormal smell, changes color or if charging takes much longer than usual, stop using and charging the product and contact Oralucent.
- This product contains a rechargeable battery that is non-replaceable. Do not open the toothbrush handle to replace the rechargeable battery.
- To avoid accidental short-circuiting of the battery after removal, do not let battery terminals come into contact with metal object (e.g. coins, hairpins, rings). Do not wrap the battery in aluminum foil. Tape battery terminals or put the battery in a plastic bag before you discard it.
Product Usage Instructions:
Material:
The product is made of 100 lb. Gloss book material, ensuring a sturdy and
professional finish.
Printing:
The product features double-sided black printing, providing a sleek and
bold appearance.
Unit:
All measurements are in millimetres (mm).
Storage:
Store the product at room temperature to maintain its quality and durability.
Expiry Date:
The product has an expiry date of 12 months, ensure to use it before this date
for optimal performance.
Abrasion Resistance:
The product has undergone an abrasion resistance test using the 3M Tape
Test (QATMEH0010), ensuring its durability.
Compliance:
The product must meet the 94/62/EC + TPCH Requirement standards for safety
and quality.
AW NO: AIWO210804A006
FAQ:
Q: Can the product be recycled?
A: The product does not have FSC certification, so please check local
recycling guidelines for proper disposal.
Q: What is the significance of the x Denotes Critical Dimension?
A: Critical dimensions marked with x are essential for Initial Quality
Control (IQC) inspection to ensure product quality.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>