PHILIPS BGP293 LumiStreet gen2 LED Light Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS BGP293 LumiStreet gen2 LED Light
Specifications:
- Lamp Family Code: BGP293
- Light Source: LED module 14900 lm
- Color Temperature: 740 neutral white
- Safety Class: I
- Distribution: Medium 50
- Side-entry Diameter: 48 to 60 mm
- Input Voltage: 220 to 240 V
- Power Consumption: 84 W
- Power Factor: 0.99
- Ingress Protection: IP66
- Mech. Impact Protection: IK08
- Surge Protection: 6 kV differential mode, 8 kV common mode
Product Usage Instructions
Installation:
- Choose a suitable mounting location with a diameter of 48 to 60 mm for side-entry installation.
- Ensure the surface is normally flammable as per safety requirements.
- Connect the luminaire to a power source with an input voltage of 220-240 V.
- Securely fix the luminaire using the provided mounting device.
Controls and Dimming :
The luminaire comes with a dimmable driver/power unit/transformer. It can be
controlled using a DALI interface for adjusting the light output as needed.
Maintenance :
For any maintenance or servicing, ensure the power is switched off before
attempting to access internal components like the LED board, driver, or
control units.
FAQ :
-
Q: Is the LED module replaceable?
A: Yes, the LED module in this luminaire is replaceable. -
Q: What is the warranty period for this product?
A: The warranty period is 5 years from the date of purchase.
LumiStreet gen2
BGP293 LED149-4S/740 I DM50 D9 48/60S
- LumiStreet gen2 Medium, LED module 14900 lm, 740 neutral white, Safety class I, Distribution medium 50, Side-entry for diameter 48 to 60 mm
- Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology. But they are having to do this with smaller and smaller budgets. That’s why the new generation of LumiStreet has been upgraded and designed to provide a solution to this challenge, it is the ideal solution for performing point-to-point replacement of conventional lighting. LumiStreet gen2 achieves this by offering high efficiency, low Total Cost of Ownership, and ease of installation and maintenance. The ease of installation and maintenance is enabled by the Philips Service tag. Moreover, the Philips SR (System Ready) socket makes it future-ready and you can pair this luminaire with lighting control and software applications such as Interact City.
Product data
General Information
- Lamp family code LED149 [LED module 14900 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- Remarks * At extreme ambient temperatures the luminaire might automatically dim down to protect components
- Light source engine type LED
- Service tag Yes
- Product family code BGP293 [LumiStreet gen2 Medium]
- Lighting Technology LED
- Value ladder Specification
- CE mark Yes
- Warranty period 5 years
- Flammability mark For mounting on normally flammable surfaces
- ENEC mark ENEC plus mark
- EU RoHS compliant Yes
- Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
LumiStreet gen2
Light Technical
- Upward light output ratio 0
- Luminous Flux 12,900 lm
- Standard tilt angle post top 0°
- Standard tilt angle side entry 0°
- Correlated Color Temperature (Nom) 4000 K
- Luminous Efficacy (rated) (Nom) 154 lm/W
- Color rendering index (CRI) 70
- Light source color 740 neutral white
- Optical cover type Flat glass
- Luminaire light beam spread 154° – 31° x 54°
- Optic type outdoor Distribution medium 50
Operating and Electrical
- Input Voltage 220 to 240 V
- Line Frequency 50 to 60 Hz
- Inrush current 53 A
- Inrush time 0.3 ms
- Power Consumption 84 W
- Power Factor (Fraction) 0.99
- Connection 2 Push-in connector 5-pole
- Cable –
- Number of products on MCB of 16 A type B
Temperature
- Ambient temperature range -40 to +50 °C
- Controls and Dimming
- Dimmable Yes
- Driver/power unit/transformer Power supply unit with DALI interface
- Control interface DALI
- Constant light output No
Mechanical and Housing
- Housing Material Aluminum die cast
- Reflector material Polycarbonate
- Optic material Polymethyl methacrylate
- Optical cover material Glass
- Fixation material Aluminum
- Housing Color Gray
- Mounting device Side-entry for diameter 48 to 60 mm
- Optical cover shape Flat
- Optical cover finish Clear
- Overall length 626 mm
- Overall width 340 mm
- Overall height 95 mm
- Effective projected area 0.0246 m²
- Dimensions (Height x Width x Depth) 95 x 340 x 626 mm
Approval and Application
- Ingress protection code IP66 [Dust penetration-protected, jet-proof]
- Mech. impact protection code IK08 [5 J vandal-protected]
- Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 8 kV common mode
- Sustainability rating Lighting for circularity
- Protection class IEC Safety class I
Initial Performance (IEC Compliant)
- Luminous flux tolerance +/-7%
- Initial chromaticity (0.381, 0.379) SDCM <5
- Power consumption tolerance +/-10%
- Init. Color Rendering Index Tolerance +/-2
Over Time Performance (IEC Compliant)
- Driver failure rate at 5000 h 0.5 %
- Control gear failure rate at median useful life 100000 h 10 %
- Lumen maintenance at median useful life* 100000 h L96
Application Conditions
- Performance ambient temperature Tq 25 °C
- Maximum dim level 0% (digital)
Product Data
- Order product name BGP293 LED149-4S/740 I DM50 D9 48/60S
- Full product name BGP293 LED149-4S/740 I DM50 D9 48/60S
- Full product code 871951410060200
- Order code 910925866795
- Material Nr. (12NC) 910925866795
- Numerator – Quantity Per Pack 1
- EAN/UPC – Product/Case 8719514100602
- Numerator – Packs per outer box 1
- EAN/UPC – Case 8719514100602
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
- www.lighting.philips.com
- 2024, March 14 – data subject to change