baseus PPCXM10TA OS-Magnetic Mini Wireless Fast Charging Power Bank User Manual
- June 1, 2024
- Baseus
Table of Contents
baseus PPCXM10TA OS-Magnetic Mini Wireless Fast Charging Power Bank
Beforeusingtheproduct,thoroughlyreadthismanual.Keepthemanualforfuturereference.
Specifications
Name : Power Bank
Model No.: PPCXMl0T
Battery : Polymer Lithium Battery
Capacity : 5000mAh 7.4V/37Wh
Cell : 5000mAh*2pcs
Energy Conversion Rate : ≥ 75%
Type-C Input : 5V 3A; 9V 2A; 12V l.5A
Type-C Cable Input : 5V 3A; 9V 2A; 12V l.5A
Type-C Output : 5V 3A; 9V 3A ;12V 2.5A;l5V 2A
Type-C Cable Output : 5V 3A; 9V 3A; 12V 2.5A; 15V 2A
Wireless Output : 5W/7.5W/10W/15W
Type-C + Type-C Cable Output :5V 3A
Total Output : 5V 3A
Size : 108.7 x 69 x 20mm
Net Weight :≈ 216g
Content
Power bank x 1
User manual x 1
Warranty card x 1
Overview
Description
This product is a mini-sized portable power bank with built-in 30W fast charging cable. The Type-C port is multi-protocol certified and supports two- way fast charging. It has multiple built-in safety protection circuits for overcurrent, overvoltage, short circuit, etc.
Warnings
-
This is NOT a toy! Please place this product in areas that are not easily accessible by children.
Do not allow children to operate this product, or accidents may occur. -
Please charge this product with a charger approved by the local safety standards in case of danger or damage.
-
DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.
-
If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.
-
Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. And ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation.
-
This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F(60°C).
-
DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature.
-
This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.
Attention
Please fully charge this device before using it for the first time.
The power banks have conversion efficiency, so the battery capacity of power
bank is not equal to the rechargeable capacity.
Please choose an appropriate charger for recharging this product and suitable
cables when cha rging other devices.
Please ensure some supervision is in progress when recharging this product, DO
NOT charge this product without any care.
Please remove the cable when done recharging this product or finished charging
for any other device to preserve the product integrity.
If the indication does not light up after pressing the power button, please
recharge this product.
Please preserve this product with a battery percentage between 25%-50% for
long-term storage. Place this product in a cool and dry environment. To slow
down battery aging, avoid storing this product in an empty or full charge for
long-term storage.
Consumer shall be liable for any personal and property damage resulted from
their improper use against the user manual or ignoring the warning, to which
our company will not bear any legal liability.
Operating Environment
Working temperature: non-tropical areas, 0°C to 30 °C
Storage temperature: 0°C to 40 °C
Caution
- This product does not contain any user-serviceable parts, and the rechargeable battery is not replaceable.
- Putting the battery pack into fire or heating it in an oven, as well as subjecting the battery pack to mechanical squeezing or cutting, may result in explosion.
- Placing the battery pack in an extremely high-temperature environment may cause explosion or leakage of flammable liquids or gases.
- Subjecting the battery pack to extremely low air pressure may cause explosion or leakage of flammable liquids or gases.
Wireless Charging Warnings
This product utilizes magnetic and capacitive coupling mechanisms to achieve
non-beamforming near-field power transmission from the power source to the
load.
The device complies with relevant regulations such as the “Interim Provisions
on Radio Management for Wireless Charging (Power Transmission) Devices,” as
well as laws and regulations concerning product quality, electromagnetic
radiation, electrical safety, and national standards.
It is not allowed to change the usage scenarios or conditions, expand the
operating frequency range, or increase the transmission power (including
adding additional power amplifiers) without permission.
It is not allowed to cause harmful interference to other legal wireless
services and stations.
Users cannot request protection against radio interference or radiation
interference. If harmful interference to other legal wireless services and
stations occurs, immediate use must be stopped, and it can only be resumed
after taking measures to eliminate the harmful interference.
Wireless charging devices are prohibited in this area. The use of wireless
charging function is not allowed.
If the use of wireless charging devices is causing interference to broadcast
services, it should be immediately discontinued.
The use of wireless charging devices in ships, aircraft, and railway
locomotives (including high-speed train units) should comply with this
regulation and the relevant regulations of the industry authority.
Statement on Toxic and Hazardous Substances in Electronic Information Products
Part
Description| Toxic or hazardous substances and elements
---|---
Lead (pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr VI)|
Polybrominated biphenyls (PBB)| Polybrominated diphenyl ethers (PBDE)
PCB|
✕
|
◯
|
◯
|
◯
|
◯
|
◯
Plastic|
◯
|
◯
|
◯
|
◯
|
◯
|
◯
Metal|
✕
|
◯
|
◯
|
◯
|
◯
|
◯
Accessory|
◯
|
◯
|
◯
|
◯
|
◯
|
◯
This form is compiled in accordance with SJ/T 11364.
◯ : It indicates that the content of the toxic and harmful substance in all
homogeneous materials of the component is below the limit specified in GB/T
26572 standard.
✕ : The content of toxic and harmful substances in at least one homogeneous
material of this part exceeds the limit stipulated in GB/T 26572 standard.
The 5-year icon refers to the “valid environment-friendly use period”, not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>