naeve 5273261 Atmospheric Galaxy-Water LED Projector User Manual
- October 26, 2023
- naeve
Table of Contents
Aputure AL-MW Waterproof Location L...
Aputure AL-MW Waterproof Location Light Review | 4K
naeve 5273261 Atmospheric Galaxy-Water LED Projector
Safety instructions
Electrical connections may only be carried out by expert staff. The
manufactures do not accept responsibility for injuries or defects caused by
improper use of a luminaire. The lamp is only for indoor using. Attention!
Before beginning any work on the lamp, disconnect it from the mains power line
by removing the fuse or unplugging the power plug. This also applies to
cleaning, maintenance and replacing bulbs. Prior to starting installation
work, de-energize the power line – remove the fuse and/or set the switch to
“OFF. Lamps with transformers may be operated only with the original
transformer. Lamps become very hot in the area of the lighting point.
Therefore, never touch the lamp when it is switched on or still hot. RISK OF
INJURY FROM BURNS! The bulb may be replaced only by competent personnel. Use
only bulbs of the same type and voltage rating. Lamps are not toys. Children
frequently do not recognize the dangers associated with electric appliances or
their packaging. Therefore, you should keep them away from children. If you
give this lamp to someone else, always include these instructions. If the lamp
is damaged, in particular the cord or lamp socket, discontinue use of the lamp
immediately. In the event of a malfunction, always have the lamp repaired by a
qualified electrician. Never attempt to repair the lamp yourself. Improper
repairs can endanger the safety of the user.
Protection class This luminaire is particularly isolated and must not be
connected to a protective earth terminal. Pay attention to the fact that
electric lines are not damaged during installation. Only replace defective
lamps by lamps of the same design, wattage and voltage. The care of luminaries
is restricted to their surfaces. Use only a dry cloth. Wetness must not get
into wiring spaces or to current-carrying parts. Plug and connection elements
must be free of train and trick strengths. Risk of eye injury! Look never
directly into the LED diodes of this light.
Environmental protection
Dispose of the rechargeable battery at a suitable collection point for
batteries.
Unboxing Check
Thank you for purchasing our products, please read the instruction manual
carefully before use. Instruction manual contains necessary safety advice and
user instructions, follow the instruction manual to operate in order to avoid
damaging the product for misuse. Check whether the product is damaged or not
when you receive the product.
Package list:
- Music starry projector x 1
- Remote controller x 1
- USB cable x 1
- User manual x1
Warnings: The power requirement of this product is USB DC 5V/2A. Once the range exeeeded, please use the regulator device, otherwise it ll affect its service life.
Notice:
- Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
- This product is suitable for indoor use.
- The product is projected by LED and laser combinations, please do not use laser shone directly in eyes and keep away from children.
How to use
- Indoor use, projecting in the sky direction.
- How to use the light projector, as shown below.
- Connect Bluetooth “BTK10” of the smart phone to play music.
- Use correct method of the remote control to make sure the remote control is pointing at the infrared sensor.
Host button function description
- Automatic recognition USB data. Note that this projector can auto-recognize and play music while inserting USB memory. USB should contain some songs
- Ocean wave 3 levels brightness adjustment
- When Power on, LED light and laser light keep on; short press this key control LED light switch, long press control laser light switch
- DC Input 5V/2A
- Short press play the previous song; Long press reduces the volume
- Short press play next song; Long press increase volume
- Short press control music Play/Pause; Long press change USB to Bluetooth (Connect Bluetooth and U-Disk at same time, itl recognize U-Disk music for priority)
- Short press achieve Bluetooth/USB mode switch when connect Bluetooth and USB at same time
- Power ON/OFF
Statement
This product has been comprehensive and rigorously testing at the factory, the
user should strictly follow the warning and instructions. Improper use
resulting in product damage is not covered by the Company’s warranty.
Remote control function description
Instruction:
When the projector light connects power; LED blue light keeps on and in non-
moved status; the laser light enters gradation mode, it can default
automatically switch off in 4 hours.
-
Control LED Ocean wave light ON/OFF
-
Control Laser light ON/OFF
-
Press “R, red light ON; Press again, red light OFF (at basic of light on at first time)
-
Press “G .green light ON; Press again, green light OFF (at basic of light on at first time)
-
Press “B”, blue light ON; Press again, blue light OFF (at basic of light on at first time)
-
Press W” , white light ON; Press again, white light OFF (at basic of light on at first time
( Note: Four color RGBW buttons can be combined by two to form a double- color projection) -
Control device volume up
-
Control device volume down
-
Select playing previous song
-
Select playing next song
-
Voice control: Connect with Bluetooth or USB memory playing music, press Micro’ icon, ocean wave and star light will fast-changing following music sound
-
Control ocean wave moving speed up (Pause–Slow–Medium-Fast)
-
Control ocean wave moving speed down (Fast–Medium–Slow–Pause)
-
Long press 3 seconds to cancel timing function. When LED, laser light flash and emit “bleep” sound three times as prompting
-
Press “FADE 1” , Ocean wave move circularly in R-G-B-W single color mode and laser light changed to gradation mode (the same feature as power On)
-
Press “FADE 2” , ocean wave move circularly in RB-RG-RW-BG-BW-GW double-color mode and laser light changed to gradation mode
-
Long press 3s control timing function for 1 hour. When LED, laser light flash and emit “bleep” sound once time as prompting. 1 hour later, it ll automatically switch off
-
Control LED ocean wave light brightness (In order of 70%–40%-40%–70%– 100%)
-
Press “LASER light” achieve either Laser light stay on or enter into gradation mode
-
Long press 3s control timing function for 2 hours. When LED, laser light flash and emit “bleep” sound 2 times as prompting. 2 hours later, iť ll automatically Switch off
-
Control Music Switch On/Off
Notice: This product comes with 4 hours automatic shutdown function that is work for 4 hours and shut down automatically.
Specification
- Maximum LED Power: 2 4W
- Green Laser: <1MW
- Power Input: USB DCSV/ 2000mA
- Operating Temperature: 14 F 104F (-10’C- 40°C)
- Projection Coverage: 161-538 ft (15-50mt)
- Product Dimensions: 123 164 mm
Näve Leuchten GmbH Austraße 5 D -74670 Forchtenberg
www.naeve-leuchten.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>