naeve 1355023 Luxor LED Ceiling Lights User Manual
- October 27, 2023
- naeve
Table of Contents
naeve 1355023 Luxor LED Ceiling Lights
Instructions
This product contains light sources of energy efficiency class “G”.
3000 – 6000 K 40 W
220-240 V~ / 50/60 Hz
2x AAA 1,5V
IP20 / SKI
WiFi: 2,4 GHz
Max. 18,71 dBm
Safety instructions
Electrical connections may only be carried out by expert staff.
The manufactures do not accept responsibility for injuries or defects caused
by improper use of a luminaire.
The lamp is only for indoor using.
Attention!
Before beginning any work on the lamp, disconnect it from the mains power line
by removing the fuse or unplugging the power plug. This also applies to
cleaning and maintenance. Prior to starting installation work, de-energise the
power line – remove the fuse and/or set the switch to “OFF. Lamps with
transformers may be operated only with the original transformer.
Lamps are not toys!
Children frequently do not recognize the dangers associated with electric
appliances or their packaging. Therefore, you should keep them away from
children. If you give this lamp to someone else, always include these
instructions. If the lamp is damaged, in particular the cord or lamp socket,
discontinue use of the lamp immediately. In the event of a malfunction, always
have the lamp repaired by a qualified electrician. Never attempt to repair the
lamp yourself. Improper repairs can endanger the safety of the user.
Protection class I . This luminaire must be connected with its protective
conductor (green-yellow wire) to the protective earth-terminal.
Pay attention to the fact that electric lines are not damaged during
installation.
Risk of eye injury! Look never directly into the LED diodes of this light. The
LED cannot be replaced in the luminaire. The given mains voltage may not be
exceeded.
Plug and connection elements must be free of train and trick strengths.
Environmental protection!
Dispose of the lamp at the collection points designated for electronic waste.