2019 Tesla Full Surround Seat Cover Installation Guide

2019 Tesla Full Surround Seat Cover

INSTALLATION GUIDE

Installation Video

Installation Guide Video

Scan the QR code on the left to watch the Tesla-specific car seat cover installation guide video.

Contact Information

Service Hotline: +86 15989119397, +86 15361429403
Email: Ruiyue1022@outlook.com
Customer Service WhatsApp: Scan the QR code on the left to add our customer service on WhatsApp.

PRODUCT SPECIFICATION

softness, and durability, with an outstanding tactile experience.
Compatibility| Designed specifically for Tesla Model Y.
Included Components| Five headrest covers, five backrest covers, three seat surface covers, and two armrest box covers. Total of 15 individual oieces.
Function| Offers comprehensive seat protection, preventing stains, scratches, and wear.
Special Design| Our seat covers are designed wllh ventilation openings to enhance airflow and Special Design breathabllity, ensuring a comfortable riding experience while preserving the  oriainal seat heatioo function.

USER GUIDE

lnstallatlon: Please follow the provided lnstallatlon guide or scan the QR code on the Instruction manual cover to watch the installation video for detailed step-by-step instructions. If you encounter any issues during the installation process, please contact our customer service department for assistance.

Component Inspection: Upon receiving the package, carefully Inspect all components as smaller parts might be placed within larger ones. If any parts are missing, contact us, and we will assist In resolving the issue.

Front Seat Backrest Airbags: Both the driver and passenger front seat backrest airbags are located on the side near the door. Before Installing, ensure proper Identification and alignment of tile front seat backrest covers. During Installation, ensure that the airbag openings on the seat covers are aligned with the airbags to facilitate proper airbag deployment in emergencies.

AFTER-SALES SERVICE

WRINKLE TREATMENT:
Due to transportation and pacl<aglng, the seat covers may have wrtnkles. These creases are unavoidable but will gradually disappear after installation and usage.

CLEANING AND MAINTENANCE:
Our seat covers are made from high-quality Napa leather. We recommend regularly wiping them with a soft, damp cloth to keep them clean. For stubborn stains, use regular toothpaste or automotive cleaner, followed by a damp cloth wipe.

AFTER-SALES SERVICE:
For any questions or concerns during use, please contact us. We are committed to providing prompt and satisfactory solutions.
Our product comes with a one-year warranty, covering manufacturing defects and material issues.
Unauthorized disassembly or modification of the product will void the warranty.

RETURN AND EXCHANGE POLICY:
Within 7 days of purchase, you can apply for a return if you are not satisfied with the product The product must be in its original condition and unused, and return shipping will be borne by the customer.
If you receive a product with quality issues, please contact us within 15 days of purchase, and we will provide free exchange service.

DISCLAIMER:

This product Is speclflcally designed for Tesla Model Y, and compattblllty or performance with other car models may vary.
When using this product, please follow Tesla’s instructions and safety guidelines. Improper use may result In safety hazards or damage, and we assume no responsibility.

If you are pleased with our comfortable and high-quality product, we would greatly appreciate your positive feedback on our product pa?e. Your honest feedback not only helps us grow as a seller but also aids potential customers in making informed decisions. We take pride in our product and believe that your positive experience will encourage others to trust us.

Tesla Model Y Seat Cover Components Display

INSTALLATION GUIDE

Installation Instructions for Front Backrest

Firstly, you need to slightly tilt the backrest, and then directly from the lop to the bottom of the set, and then down the set at the same time, lhe left and right sides of a little force, and then slowly a little bit to pull down.

Installatlon Instructions for Front Backrest

The lower part of the joint with Velcro needs lo be pushed into the seam of the backrest and lhreaded through to the back and pulled out.

Installation Instructions for Front Backrest

Push the tucked leather al the headrest opening of the backrest cover Into the headrest gap with your fingers and snap it tightly.

Installatlon Instructions for Front Backrest

Go to the bottom of the seat to loosen the seal’s flap skin and pull It out, there are two flat long plastic hooks that are stuck on the small iron bar, touch the hooks and flatten the hooks and push them with your fingers lo loosen them.

Installation Instructions for Front Backrest

Then tuck this fender skin inside the backrest cover. Pull out as much as you can from the lol.ver part of lhe Velcro strap that you just pushed In from the front, and then stick it to each other with the Velcro strap on the back.

Installatlon Instructions for Front Backrest

Hook the hook under the backrest oover back to the original position of the stopper.

Installation For Front Seat Surface

Toe book bag strap of the seat cover is pushed into the slit and pulled out through the slit to the back of the seat.

At the back of the seat. the straps pushed over the front are pt.6xl out 19111 the leather Is visible. Toe lealher Is then pulled wilh a bit of force and tugged Into place.

At the front of the seat, there are two iron hooks on each side of the seat cover. The hooks with rubber bands are pushed into the seam of the seat and are pulled out later on to the back of the seat (some products may not have this hook dueto production batches).

At the front of the seat, there are two iron hooks on each side of the seat cover. The hooks with rubber bands are pushed into the seam of the seat and pulled out a little later to the back of the seat ( some products may not have this hook due to production batches).

The exra leather on the side of the seat cover can be pushed into the seam of the rubber shell with the aid of a small tool.

At the front of the seat, after the straps that were just pulled out have been pulled to the front, the buckles are put on and then tightened.

Installation For Front Headrest

The headrest cover is taken out and fitted directly from lhe top to lhe bottom. It ls nol necessary to remove lhe headrests.

The extra leather under the headrest cover Is, tihen tucked into the gap between the headrest and the backrest.

Installation Instruction For Central Armrest

When filling the armrest gloves, the armrest box lid must firsl be opened. The armrests are lhen fitted from the back first, wllh the part of the armrest with the rubber band being stuck Into the slit at lhe back. The armrests are then pulled towards the front until they flt over the entire armrest box lld.

The rubber bands around the four sides of the armrest cover are adjusted Into position u ritl’I the entire annrest cover is wrapped completely aroond the cover.

Instruction For Rear Seat Disassemble

The rear seal of the Model Y can be lifted straight up without the need to tum on any mechanism buttons.
This Is because the seat cover can only be fitted very securely once the seat surface has been lifted.

When lifting the back seat, pay particular attenfiom to the fact that the seat has a power connection and th.at the connection has a plug. This plug can be looserred.
It Is advisable to loosen !his plug before lnstalllng the seat cover In order 10 avord tearing the wires. Of course, it is possible to install the cover witlhout loosening the plug, but care must be taken fo a tearing tfie power cable.

Disassemble The Rear Headrests

The Model Y has three headrests in the rear backrest, which must be removed with the help of a tool. When each headrest is lifted up, the underside of the two Iron pasts can be seen.There Is a button an the left and a small hole on the right. A small screwdriver Is needed here. The button on the left Is pressed by hand and the small hole on the right Is poked In with the screwdriver while the button Is pressed. lhe headrest is then pulled upwards by hand and the headrest is removed.

Below the two iron posts, there is a button on the left and a very small hole on the right. Here you need to use a small one-way screwdriver. The button on the left is pressed by hand and the small hole on the right Is poked In with the screwdriver at the same tlme as the button Is pressed. The headrest Is then removed by pulling the headrest upwards by hand again.

Installation Instruction For Rear Left Backrest

After the backrest cover has been aligned with the holes and positioned properly, it is slipped in directly from the top ta the bottom.

The velcro straps under the backrest cover are pulled out and pushed through the s111 to the back of the backrest.

In the trunk, the padded panel behind the backrest is openedin order to facilitate pulling out the Velcro straps.

The backrest cover has two child sgat snaps on the underside.Take care that the leather is passed over the top of the child seat snaps and does not cover the snaps.

The Velcro straps on the back of the backrest cover are pulled out and positioned before being attached to the backrest.

The extra leather of the backrest cover is pushed into the slit with the help of a small tool.

Once the holes have been aligned and positioned, It Is snapped in directly from the top to the bottom.

The armrests of the centre backrest are lowered and then the leather underneath the centre backrest cover, through the slit in the armrests and then pulled out.

Installation Instruction For Middle backrest

The armrests of the centre backrest are retracted and the leather under the front of the centre backrest cover is then pulled out through the slit in the armrests.

The leather underneath the front of the centre backrest cover is passed under the seam of the armrest Once fully pull’ed out, lhe Velcro straps attached under the leather are then pulled through the entire seam of the centre backrest to the back.

Once the centre backrest has been lowered, the Velcro straps that were Just pushed Into the gap are pulled out Intact until the leather rs visible. After the leather has been pulled by hand and adjusted in position, the Velcro straps are dipped tightly.

The armrests are retracted then the excess leather is tucked into the slit with a small tool.

The zip at the back of the backrest cover Is opened and the seat bell ls pulled up through the backrest cover and adjusted to fit into the backrest from top to bottom.

The Velcro straps under the backrest cover are pushed: through the slit under the backrest and into the back of the backrest. Take care that when pushing through, the leather goes over the top of the child seat buckle arld that its does not cover the child seat buckle.

Installation Instruction For Rear Right backrest

The Velcro straps that have Just passed under the backrest and come to the back are finished and attached to the backrest. When tightening the backrest, try not to apply too much force as this may break the straps. When tightening the backrest, the leather coming through the back is pulled to adjust the fll of the backrest.

After lhe backrest cover has been positioned and the holes in the aligned backrest have been adjusted, the zip on the back of the backrest cover is tightened. The backrest cover Is then pulled downwards to a<tJst Its position and Is tl~tened against the backrest of lhe seat.

At the front of the backrest, the extra leather is tucked into the slit with the help of a small tool.

Installation Instructions for Rear Armrest

The armrests are adjusted in position and slipped in from the top to the bottom.

The leather underneath the front of the armrest is tucked into the slit in the armrest

The leather under the front of the armrest, after being tucked into the slit in the armrest, is pulled out. The leather under the front of the armrest is tucked into the slit in the armrest and pulled out. When pulling, use a small amount of force to pull the leather through the gap. Then use a little more force to pull the leather untllthe armrests are fully In place. Be careful not to pull on the straps with so much force that you may break the straps and not be able to gel the leather through the seam.

After lhe leather has been pulled tight from underneath the seam, the armrests are positioned and the velcro behind the leather is dabbed in place.

Installation Instruction For Rear Headrest

The 3 headrests lhat are removed were flrsl fitted back Into place.

The headresl cover is taken out and fitted directly from top to bottom. Take care that lhe front and back of the headrest cover are distinguished.

Once the position of lhe headrest cover has been adjusted.the cover is pulled down as tightly as possible and the exlra leather Is tucked Into lhe slit under the headrest.

Installation Instructions For Rear Seat Cover

The seat cover Is taken out and laid on the rear seat surface.

Note the two Iron hooks In the seat belt holes. The hooks need to be threaded through the seat belt holes in the seat to the back of the cushion.

The hooks that come through the seat bell holes need to be hung under the seat surface.

The hooks that come through the seat belt holes need to be hung under the seat surface.

The straps for the back seat need to be threaded.
However,care should be taken that it is not pulled too tightly, so that the back seat does not fit back in because the straps are pulled too lightly. Here it can be the same as in the photo. The two recessed positions on the back of the seat are pressed down with your fingers so that they are just deep enough to be pressed Into the recessed position, and the tension of the straps is adjusted so that they are not too slack.

Because the two recessed positions are for the two bars that hold the back seat in place. If they are pulled too tightly, the back seat will not fit tightly because of the elasticity of the straps.

Once the Iron hooks under the rear seat face have been hung in the right place under the rear seat, they do not need to be pulled too tightly so that the rear seat Is not easily fitted back In.

After the elastlclty of the straps under the back seat has been adjusted, adjust the flatness of the seat cover. After the back seat has been fitted back in place, the seat cover Is Installed.

Specifications

• Product: Tesla Full Surround Seat Cover
• Compatible with: Tesla Model Y

Product Usage Instructions

Installation Guide

1. Ensure the Tesla Full Surround Seat Cover is compatible with your Tesla Model Y.
2. Refer to the installation video provided in the manual or scan the QR code to watch the guide video.
3. Prepare the necessary tools and materials as shown in the video.
4. Follow the step-by-step instructions in the video to properly install the seat cover.

After-Sales Service

If you encounter any issues during or after installation, please contact our service hotline or email for assistance.

FAQ

Q: How do I know if the seat cover is compatible with my Tesla Model Y?

A: The Tesla Full Surround Seat Cover is specifically designed for Tesla Model Y. Ensure to check the product specifications before installation.

Q: What should I do if I need further assistance?

A: You can reach out to our customer service via the provided hotline, email, or WhatsApp for additional support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>