D-Link DWR-900V 5G Mobile Hotspot User Guide
- June 1, 2024
- D-Link
Table of Contents
D-Link DWR-900V 5G Mobile Hotspot
Product Information
- Specifications:
- Model: DWR-900V 5G Mobile Hotspot
- Reset Options: Factory Reset, Hard Reset
Product Usage Instructions
- Factory Reset Procedure:
- From the home page, select the More tab.
- Under System Options, click on Backup/Reset.
- Click on Factory Reset to initiate the soft reset process.
- The Mobile Hotspot will restart, and your settings will be back to the factory default settings.
- Hard Reset Procedure:
- Ensure the Mobile Hotspot is powered on.
- Press and hold the reset button on the right side of the Mobile Hotspot for about 10 seconds.
- The display touch screen on the mobile hotspot will turn off, and the device will reset.
- Please allow up to a minute for the reset procedure to complete.
FAQs
- Q: How often should I perform a factory reset on my DWR-900V 5G Mobile Hotspot?
- A: Factory resets are typically done when troubleshooting issues or if you want to return the device to its original settings. It is not necessary to perform frequent factory resets unless recommended by technical support.
How to factory
How to factory reset the DWR-900V 5G Mobile Hotspot?
Soft Reset
- Connect your DWR-900V to the laptop by Type C cable or wirelessly.
- If this is your first time installing the Mobile Hotspot, use a web browser and type in
- http://192.168.1.1 in the address bar. Enter the Admin Password and click login to start the configuration process.
- The web address and default admin password are printed on the device label at the bottom of the device.
- By default, the admin password is admin
- Note: If you have changed the password and cannot remember it, you will need to reset the router to factory defaults.
- From the home page, Select the More tab, under System Options, Click on Backup/Reset
- Click on Factory Reset to initiate the soft reset process.
- The Mobile Hotspot will restart, and your settings will be back to the factory default settings.
Hard Reset
- Ensure the Mobile Hotspot is powered on. Press and hold the reset button on the right side of the Mobile Hotspot for about 10 seconds.
- The display touch screen on the mobile hotspot will turn off, and the device will reset. Please take up to a minute for the reset procedure to complete.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>