ninebot 2ALS8-OP0002 Gokart Pro2 Series Gokart Kit User Manual

ninebot 2ALS8-OP0002 Gokart Pro2 Series Gokart Kit

Specifications

• Compatible Products: Ninebot Gokart Pro2 Series, Segway Gokart Pro2 Series, Segway Gokart Kit 2
• Buttons: Left button, Direction buttons, Power button, Select button
• Display: Speedometer, Bluetooth, Low battery indicator, Battery level indicator, Game Mode indicator, Manual Drive Mode indicator

Product Usage Instructions

1. Display Overview
   • The display shows various indicators such as a speedometer, Bluetooth connectivity status, battery level, Game Mode, and Manual Drive Mode.
2. Buttons Functions
   • Understand the functions of each button in different modes such as Game Mode and Manual Drive Mode.
3. Installation
   • Follow the steps to install the game controller on the steering wheel by removing the dashboard cover from the Gokart and fixing the controller in place.
4. Turn On/Off
   • To turn on the controller, toggle the power button up. To turn it off, toggle the power button down and hold for 3 seconds. Note that the controller will automatically turn off when disconnected or when the Gokart is powered off.
5. Game Mode
   • Learn how to enter and exit Game Mode by connecting the USB receiver to computers or game consoles and ensuring a successful connection indicated by a blue light.
6. Drive Modes
   • Explore different drive modes such as Speed Modes compatible with Gokart Kit 2, Gokart Pro2, Ninebot S, and Ninebot S-Pro 240.

FAQ:

Q: What should I do if the battery icon lights up?

A: When the low battery indicator lights up, please charge the device immediately to ensure uninterrupted usage.

Q: How do I change gears in Manual Drive Mode?

A: Use the Left button to downshift gears from 3 to 0 and the Right button to upshift gears from 0 to 3.

Compatible Products

• Ninebot Gokart Pro2 Series
• Segway Gokart Pro2 Series
• Segway Gokart Kit 2

Diagram

Display Overview

Buttons Function

In Game Mode, the function of these buttons depends on the game consoles you connect.

Installation

1. Remove the dashboard cover from the Gokart.
2. Fix the game controller on the steering wheel.

Turn on/off

• Toggle the power button up or down to turn it on.
• Toggle the power button down and hold for 3 seconds to turn it off.
• Note: The game controller will automatically be turned off when it is disconnected from Gokart or Gokart is powered off.

Game Mode

1. Enter Game Mode
   • a) As illustrated, lift the front side of Gokart and put the support frame under it.
   • b) Connect the USB receiver to computers or game consoles.
   • Note: Make sure the USB receiver is in range of Bluetooth connection.
   • c) The indicator turns blue when the device is connected successfully.
   • Note: At this point, the GAME icon lights up, and the speedometer displays “–”.
   • Note: If the GAME icon flashes when the USB receiver is connected, please check if Gokart is powered on.
2. Exit Game Mode
   • a) Disconnect the USB receiver from computers or game consoles.
   • b) Restart the Gokart.

Drive Modes

1. Speed Modes****
   Compatible Gokart| Compatible self-balancing vehicles| Max. speed| Max. speed in Manual Drive Mode
   ---|---|---|---
   ECO| SPORT| RACE| Gear 1| Gear 2| Gear 3
   Gokart Kit 2| Ninebot S| 8 km/h| 18 km/h| 24 km/h| /| /| /
   Ninebot S-Pro 240| 8 km/h| 18 km/h| 24 km/h| /| /| /
   Ninebot S-Pro 320| 8 km/h| 18 km/h| 27 km/h| /| /| /
   Ninebot S-Max| 8 km/h| 18 km/h| 37 km/h| /| /| /
   Gokart Pro2| Ninebot S-Max| 8 km/h| 18 km/h| 37 km/h| /| /| /
2. *Manual Drive Mode For Gokart Pro2 only**
   • a) When Gokart is at a full stop, toggle the power button up or down to enter Manual Mode.
   • b) Press the Right button to upshift gears from 0 to 3.
   • c) Press the Left button to downshift gears from 3 to 0.
   • d) When Gokart is at a full stop, toggle the power button up or down to exit Manual Mode.
3. *Neutral Mode For Gokart Pro2 only**
   • a) Press the Left button and Right button at the same time to enter Neutral Mode.
   • b) Press the Left button or Right button to exit Neutral Mode.
   • Note: After exiting, the speed mode corresponding with the current speed will be displayed on the screen.
4. Park Mode
   • a) Gokart is in Park Mode by default when powered on.
   • b) Press and hold the Left button and Right button at the same time to quick-switch to Park Mode.
5. Reverse Mode
   • a) Toggle the power button up or down to switch to Reverse Mode.
   • b) Step the brake pedal on Gokart twice to quickly enter Reverse Mode, and step twice again to go back to the previous mode.

Reset

If your Game Kit is lost or damaged, you need to replace it with a new one, please follow the instructions below to reset your device.

1. Reconnect to Gokart
   • Press and hold the buttons as illustrated for 3 seconds. When Gokart makes a beep sound, it means the Game controller is connected to Gokart successfully.
   • Please complete pairing with Gokart within 10 seconds after turning on the Game controller and make sure the Gokart is in the 1-3 meter range with the Game Controller.
2. Reconnect USB receiver
   • a) Connect the USB receiver to computers or game consoles.
   • b) Press and hold the buttons as illustrated for 3 seconds.
   • If connected successfully, “C1” will be displayed on the screen. If failed, “F1” will be displayed. Make sure the USB receiver is in the 1-3 meter range with the Game Controller.
3. Reset Steering wheel
   • Note: Do not turn the steering wheel during reset.
   • Press and hold the buttons as illustrated for 3 seconds when the steering wheel is mounted on Gokart.
   • If reset successfully, “C2” will be displayed on the screen. If failed, “F2” will be displayed.
4. Restart
   • If the steering wheel or device shuts down, please use tools to press the reset hole on the back of the game controller to restart it.

Specifications

• Product Name Segway Gokart Game Kit
• Short name Game Kit
• Brand Segway
• Model PI1401
• Net Weight (Game controller) 170g
• Materials PC+ABS
• L × W × H 137 × 66 × 52mm
• IP Rating IPX5
• Packing Contents Game controller, support frame, USB receiver

Trademark and Legal Statement

• Segway and Rider Design are trademarks of Segway Inc.; The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Segway-Ninebot is under license.
• Other trademarks and trade names are those of their respective owners.
• Due to the constant improvement of products, this manual and the actual products may be slightly different in color, appearance, etc.
• Actual products shall prevail when there is a discrepancy between the actual products and the manual.
• ©2023 Ninebot (Beijing) Technology Co., Ltd. All rights reserved.

FCC

Certification

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Industry Canada (IC) Compliance Statement for Canada

This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions:

1. this device may not cause interference,
2. this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3 (B)/NMB-3(B)

Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc. or Ninebot. Such modifications could void the user’s authority to operate the equipment.

• Segway Game Kit
• Model: PI1401
• FCC ID: 2ALS8-OP0002 IC: 22636-OP0002
• USB receiver
• Model R1234
• FCC ID: 2ALS8-OP0003 IC：22636-OP0003

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>