Kessil W360X Monopoint Adapter User Guide
- June 1, 2024
- Kessil
Table of Contents
Kessil W360X Monopoint Adapter User Guide
Adapter Wiring
-
At the front of the mono point adapter, remove the two screws.
-
Use a flat head screwdriver to push the plastic atch inward. This will cause the adapter to separate into 2 parts.
-
Remove the bottom housing from the adapter.
-
Drilled hole allows the wire to pass through.
-
Secure the wire at the desired point.
-
Secure the adapter base to the desired ceiling locations, then attach the bottom housing.
1689 Regatta Blvd., Richmond, CA 94804
Kessil@Kessil.com
510-620-5250
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>