kogan KAM44BEVFGA 44L Bar Fridge User Guide
- June 1, 2024
- Kogan
Table of Contents
kogan KAM44BEVFGA 44L Bar Fridge User Guide
SAFETY & WARNINGS
WARNING: Risk of fire/flammable materials
- This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops
- offices and other working environments
- farmhouses and by clients in hotels
- motels and other residential type environments
- bed and breakfast type environments
- catering and similar non retail applications
- This appliance can be used by children aged from 8 years and above and persons with reduce physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children should be supervised to ensure that they do not play with the appliance.
- Cleaning and user maintenance shall not be performed by children without supervision.
- Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
- If the power cord is damaged, it must be replaced by the Kogan.com, its service agent or similarly qualified persons in order to avoid a hazard. Cease use immediately and contact help.Kogan.com for support.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- The appliance must be unplugged after use and before carrying out user maintenance on the appliance.
- Warning : Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- Warning : Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by Kogan.com.
- Warning : Do not damage the refrigerant circuit.
- Warning : Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by Kogan.com.
- Warning : Dispose of the refrigerator according to your local environmental authority for it use flammable blowing gas and refrigerant.
- Warning : When positioning the appliance, ensure the power cord is not trapped or damaged.
- Warning: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
- Do not use extension cords or grounded two prong adaptors.
- Danger: Risk of child entrapment. Before you throw away your old refrigerator or freezer:
- Take off the doors.
- Leave the shelves in place so that children may not easily climb inside.
- The refrigerator must be disconnected from the power supply before attempting the installation of accessory.
- Caution: The refrigerant and foam insulation material containing anticyclone used in this appliance are flammable. Therefore, when disposing of the appliance, ensure it is kept away from any potential ignition sources. It must be recovered by a specialised disposal company with the appropriate qualifications for handling hazardous materials, rather than being disposed of through incineration, to mitigate environmental damage and prevent potential harm.
- The necessity that, for doors or lids fitted with locks and keys, the keys be kept out of the reach of children and not in the vicinity of the refrigerating appliance, to prevent children from being locked inside.
- This is a freestanding appliance; it is not intended to be used as a built-in appliance.
- When using for wine storage, this appliance is intended to be used exclusively to store of wine.
- Any replacement of maintenance of the LED lamps is intended to be made by the Kogan.com, its service agent or similar qualified person.
- Warning: To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions.
- Warning : Connect to potable water supply only. (Suitable for ice making machine)
- To Prevent a Child from Being Entrapped, Keep Out of Reach of Children and Not in The Vicinity of Freezer (Or Refrigerator). (Suitable for products with locks)
Meaning of safety warning symbols
Prohibition symbols
The symbols indicate prohibited matters and those behaviours are forbidden.
Non-compliance with the instructions may result in product damages or endanger
the personal safety of users.
Warning symbols
The symbols indicate matters that must be followed and those behaviours must
be strictly executed in line with the operation requirements. Non-compliance
with the instructions may result in product damages or endanger the personal
safety of users.
Note symbols.
The symbols indicate matters to pay attention to and these behaviours shall be
specially noted. Due precautions are needed or minor or moderate injuries or
damages of the product will be caused.
This manual contains lots of important safety information which shall be observed by the users.
Electricity Related Warnings
- Do not pull the power cord when pulling the power plug of the beverage cooler. Firmly grasp the plug and pull out it from the socket directly
- Do not damage the power cord under any condition so as to ensure safety use, do not use when the power cord is damaged or the plug is worn.
- Worn or damaged power cord shall be replaced in manufacturer authorised maintenance stations.
The power cord should be firmly contacted with the socket or else fires might be caused. Ensure that the grounding electrode of the power socket is equipped with a reliable grounding line.
Turn off the valve of the leaking gas and then open the doors and windows in case of leakage of gas and other flammable gases. Do not unplug the cooler and other electrical appliances considering that spark may cause a fire.
To ensure safety, it is not recommended that to place socket, regulators, rice cookers, microwave ovens and other appliances at the top of the beverage cooler, those recommended by the manufacturer are not included. Do not use electrical appliances in the food pantry.
Operation Warnings
- Do not arbitrarily disassemble or reconstruct this appliance, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist.
- Damaged power cord must be replaced by the Kogan.com, its maintenance department or related professionals in order to avoid danger. Contact help.Kogan.com for support.
Please be aware that the gaps
between the door and the body are narrow.
Exercise caution to avoid placing your hand in these areas to prevent the risk
of pinching fingers. Always handle the cooler door gently when opening or
closing it to prevent articles from falling.
- Refrain from allowing children to play with the packaging and other components, as the bending board and plastic film pose a suffocation hazard. Additionally, ensure children do not enter or climb onto the appliance to prevent accidental entrapment or injuries from falling coolers.
- Avoid spraying or washing the appliance, and do not place it in areas prone to moisture or water splashes, as this may compromise the electrical insulation properties of the cooler.
- Never use the appliance body, appliance door, or any other part as a pedal or support.
Do not place heavy objects on the top of the appliance considering that objects may fall when open or close the door and accidental injuries might be caused.
Warnings related to Placing Items
- Do not put flammable, explosive, volatile and highly corrosive items in the appliance to prevent damages to the product or fire accidents.
- Do not place flammable items near the cooler to avoid fires.
This product is for household refrigeration purposes, mainly used in the storage of beverage, not for other purposes, such as storage of blood, drugs and biological products.
Warnings for Energy
- It is important to note that the appliance may not operate consistently if placed for an extended period below the minimum recommended temperature range for which the cooler appliance is designed.
- Please adhere to the recommended storage times provided by beverage manufacturers for all types of beverages to prevent spoilage.
- Take necessary precautions to prevent a significant rise in beverage temperature during defrosting of the beverage cooler.
- Be aware that a rise in beverage temperature during manual defrosting, maintenance, or cleaning may shorten the storage life of the beverages.
- Ensure that keys for doors or lids with locks are kept out of the reach of children and away from the vicinity of the cooler appliance to prevent children from accidentally locking themselves inside.
Warnings
Refrigerant and anticyclone foaming material used for the appliance are
flammable. Therefore, when the appliance is disposed of, it shall be kept away
from any fire source and be recovered by a special recovering company with
corresponding qualification other than be disposed by combustion, to prevent
damage to the environment or any other harm.
When the appliance is abandoned, remove the door. When removing the door body, pay attention to prevent pinching hands and remove the door seal and shelves, put the door and shelves in a suitable position, so that children will not enter to play and have an accident.
Disposal
This marking indicates that this appliance should not be disposed with
other household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
OVERVIEW
44L Model
93L Model
INSTALLATION
Before First Use
Before using the cooler, remove all packaging materials including bottom
cushions and foam pads and tapes inside the cooler, tear off the protective
film on the door and the cooler body.
- Allow the appliance to settle for at least 2 hours after transportation before powering it on to prevent a decrease in cooling capacity or damage to the appliance. When starting the appliance for the first time, let it sit for 30 minutes before connecting to power.
- In case of a power failure or during cleaning, unplug the appliance. Wait at least 5 minutes before reconnecting to the power supply to prevent damage to the compressor from frequent starts.
- During compressor operation, water droplets or frost may form on the back wall of the refrigerated compartment, which is a normal occurrence. Over time, the frost will melt into water and flow into the water tray to evaporate.
- Do not connect the appliance to electronic energy-saving plugs or converters that convert DC to AC power (e.g., solar energy systems, ship grids).
Location
- The cooler is placed in a well-ventilated indoor place; the ground shall be flat and sturdy (rotate left or right to adjust the wheel for levelling if unstable).
- Avoid direct sunlight and heat sources such as stove, heating radiator, etc. If the cooler must be put next to heat source, a suitable insulation board shall be applied or keep the cooler away from heat source.
- The top space of the appliance shall be greater than 30cm and the distances from both sides and backside shall be more than 10cm to facilitate heat dissipation.
Recommended Layout for Beverages in the Fridge
Ensure that cans do not touch the back side of the appliance to maintain
proper air circulation within the cabinet. The capacity for storing beverage
cans is calculated based on the standard size of a 355ml can (65mm x 125mm
approx.).
Note: Using oversized beverage cans may impact the total number of cans that can be stored in the cabinet.
93L Model:
inner row
Top shelf: 6
Second shelf: 16
Third shelf: 16
Middle row
Top shelf : 5
Second shelf: 5
Third shelf: 5,
Base: 6
Outer row
Top shelf: 11
Second shelf: 15
Third shelf: 15,
Base: 15
Total beverage can storage-115cans
44L Model
Inner row
Top shelf: 12
Base: 9
Outer row
Top shelf: 11
Base :16
Total can storage : 48cans
Temperature Zones Inside the Fridge
Due to different temperature zones generated due to air circulation in the
cooler, the upper area’s temperature is higher than the low area.
Energy saving Tips:
- The appliance shall be placed in room dry and ventilated. The cooler cannot be put under direct sunlight or next to heat source (such as radiator, stove, etc.) and a suitable insulation board shall be applied if necessary.
- Try to shorten opening time of appliance’s door.
- Place beverage into appliance after it has cooled down
Reversing the Door
-
Follow the following instructions for the change of the opening direction of the beverage cabinet’s door (for instance: from right-handed door to left-handed door):
-
Close the glass door of the beverage cabinet, use a blade to remove the axle sleeve (1) and rivet (2) carefully, loose the mounting cover (3) of the door hinge and three positioning bolts (4) and remove the upper hinge (5) and axle sleeve (6).
-
Open the door of the beverage cabinet and carefully detach the glass door.
-
Dismantle the door axle sleeve (6) at lower part of the glass door, door stopper block screws (8) and door stopper (7) and fix them to left side.
-
Dismantle the levelling foot (10), positioning bolts (4) and lower hinge (9), then exchange the parts of right and left sides and later use the reverse method to install the levelling foot and positioning bolts.
-
Put the aforesaid glass door on the lower hinge, install the door axle sleeve 6 back and fix the upper hinge (5).
-
Align the door with the cabinet and check the tightness of gasket and then install all the fasteners (1), (2).
OPERATION
Temperature Control
44L Model
- After powering-on the appliance, turn the temperature controlling knob to adjust temperature level.
- “Cold” is the warmest setting.
- “Colder” is the coldest setting.
- “OFF” means stop running.
Note: Recommended setting: “normal”
The setting range of Celsius temperature is 1°C~10°C (33°F~50°F).
93L Model
- The temperature inside the appliance is adjusted using the temperature control knob. “1, 2, 3, 4, 5, 6, OFF” on the knob does not represent a specific temperature value.
- he smaller the number, the higher the temperature
- the higher the number, the lower the temperature inside the beverage cooler.
- “OFF” indicates that the compressor has stopped working.
- The lamp can be adjusted using the light switch.
Note: Recommended setting: “Mid-range”
CLEANING & CARE
- Unplug power plug to disconnect the appliance from power.
- Dusts behind the beverage cooler and on the ground shall be timely to improve the cooling effect and energy saving.
- Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water cleaned or diluted detergent.
- The interior of the beverage cooler should be cleaned regularly to avoid odour
- If the appliance is left unused for a long time:
- Disconnect the appliance from power.
- Clean the appliance
- Keep the door open.
- Prior to cleaning the interior, ensure the power to the appliance is turned off and remove all food, beverages, and shelves.
- Clean the inside of the appliance using a soft cloth or sponge dampened with a solution of two tablespoons of baking soda mixed with a quart of warm water. Rinse thoroughly with water and wipe dry. After cleaning, allow the appliance to air dry with the door open before restoring power.
- For difficult-to-reach areas within the appliance, such as narrow gaps or corners, it is recommended to regularly wipe them with a soft cloth or soft brush. When necessary, use additional tools such as thin sticks to ensure thorough cleaning and prevent the accumulation of contaminants or bacteria.
- Avoid using soaps, detergents, or spray cleaners to clean the interior of the appliance, as these may cause odors or contamination.
- Clean the shelves using a soft cloth dampened with soapy water or diluted detergent. Rinse with water and dry thoroughly with a soft cloth or allow them to air dry naturally.
- Wipe the outer surface of the appliance with a soft cloth dampened with soapy water or detergent, then dry with a clean cloth. Take care not to rub or scratch the glass door to prevent breakage or scratches.
- Refrain from using hard brushes, steel wool, wire brushes, abrasives (such as toothpaste), organic solvents (such as alcohol, acetone, or banana oil), boiling water, acidic or alkaline substances, as these may damage the surface and interior of the appliance. Boiling water and organic solvents like benzene can deform or harm plastic parts.
- During cleaning, avoid directly rinsing with water or other liquids to prevent short circuits or compromising electrical insulation if immersed.
Note: Do not use detergent and solvent with sand or acid.
TROUBLESHOOTING
Appliance is not working|
- Ensure the appliance is plugged and connected to power.
- Low voltage.
- Check the temperature control knob is in the work area.
- Power failure or tripped circuit.
---|---
l ong-term operation of compressor|
- It is normal that cooler operates for longer time in summer when the ambient temperature is higher.
- Do not put too much beverage s in the appliance at one time.
- Frequent opening of fridge door.
Light not work| Whether the fridge is connected to power, whether the
indicator light is damaged.
Loud noises|
- Ensure the floor is flat, whether the placement of fridge is stable.
- Ensure the fridge accessories are properly placed.
Overheat on sidewall| The fridge enclosure may emit heat during running
specially in summer, this is caused by the radiation of the condenser and it
is a normal phenomenon.
Surface condensation| Condensation: condensation phenomenon will be
detected on the exterior surface and door seals of the cooler when the ambient
humidity is high, this is a normal phenomenon and after wiping with towel,
turns up the set temperature of the appliance properly.
Airflow sound Buzz Clatter|
- Refrigerants circulating in the refrigerant lines will produce eruption of sound and grunts which is normal does not affect the cooling effect.
- Buzz will be generated by running compressor specially when starting up or shutting down.
- The solenoid valve or electric switch valve will clatter which is a normal phenomenon and does not affect the operation.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>