BOSCH EVERSE Battery powered Loudspeaker User Guide
- May 15, 2024
- Bosch
Table of Contents
BOSCH EVERSE Battery-powered Loudspeaker
Specifications
- Product Name: REVERSE Battery-powered Loudspeaker
- Power Source: Battery-powered
- Connectivity: XLR, USB, 3.5mm jack
- Controls: Input gain, EQ settings, DSP controls
- Features: Automatic Feedback Suppression, VU meters
Troubleshooting
No Sound
Possible Cause(s): Improper gain
Action
- Check all sources are on and properly connected.
- If using a condenser microphone, ensure it’s plugged into INPUT 1 via XLR with phantom power enabled.
- Inspect VU meters on LCD for signal presence and adjust input and gain controls accordingly.
- If no signal, check the wiring between source and the loudspeaker.
Poor Low-Frequency Response:
Action
- If not using subwoofers, select OFF in SUB menu cross-over frequency.
- Change the MODE to MUSIC, LIVE, or CLUB in DSP control menu if SPEECH mode is active.
- In INPUT DSP control menu, set PRESET to FLAT if not already done.
- Reset EQs in low frequencies in INPUT and DSP control menus if EQ is active.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>