MXN44C-TVI Compact Mini Ball HD-TVI Color Camera Instruction Manual
- June 3, 2024
- MXN
Table of Contents
Instruction Manual
MXN44C-TVI
Compact, Mini Ball HD-TVI Color Camera
◈ MXN44C-TVI Camera
◈ Features
- Compact Mini Ball HD-TVI Color Camera
- 2.07 Mega pixels Full HD SONY CMOS Color camera
- 1/2.8” Color CMOS high resolution image sensor (STARVIS)
- HD-TVI 1080p 30fps
- IP69K Waterproof Rating
- Diagonal 154˚, 140˚ or 66˚ Viewing angle
- Normal/Mirror Image adjustable (via loop wire)
- Ultra low light performance
- Automatic Electronic Iris
- Built-in Microphone (for one-way Audio)
- Multi purpose (Frontview, Sideview, Rearview, Surveillance, etc)
- Temperature Range -40˚C to +80˚C
- Vibration resistant (10G)
- Waterproof screw type connector, 4-pin mini-DIN
- ECE R10.05 approved (EMC)
Available versions of model MXN44C-TVI:
| MXN44C-078-TVI | 66˚(D) x 58˚(H) x 32˚(V) |
|---|---|
| MXN44C-140-TVI | 140˚(D) x 124˚(H) x 67˚(V) |
| MXN44C-160-TVI | 154˚(D) x 133˚(H) x 93˚(V) |
10R-06 11379
◈ Contents
◈ Technical Specifications
| Image Sensor : | 1/2.8” SONY CMOS Sensor (STARVIS) |
|---|---|
| Effective Pixels : | 2.07 Mega pixels 1920(H) X 1080(V) |
| Resolution : | 1080 TV lines |
| Scanning System : | Progressive |
| Video Output : | HD-TVI 4.0, 1080P/30fps |
| Audio Input : | High Sensitive C-Microphone |
| S/N ratio : | Minimum 48dB (at AGC off) |
| Minimum illumination : | 0.5 Lux (50IRE) |
| Power consumption : | DC 12V, 100mA |
| Power range : | DC 9 ~ 48V |
| Operating temperature : | -40ºC to +80ºC |
| Viewing angle : | 140˚(Diagonal) x 124˚(Horizontal) x 67˚(Vertical) |
| Dimensions : | Ø 38mm, 59(W) x 38(D) x 50(H) incl. bracket |
| Weight : | Approx. 107g (total weight incl. bracket : 120g) |
◈ Installation
▪ Camera Assembly
- Fix the supplied camera bracket to the vehicle.
- Fix the bracket with camera according to drawing.
- Adjust the viewing angle of the camera and fasten the screws firmly.
▪ Cable grommet
Drill a suitable hole (approx. Ø 19mm) and insert the cable grommet.
Just before final fixation, please apply a proper sealant (for prevention)
between the hole and the grommet and also between the cable and the grommet.
▪ Securing cable connection
-
Match the arrow marks and press the connectors together.
-
Screw the camera connector up clockwise.
-
Tighten cable connection firmly in order to prevent water ingress.
Note! Warranty will not be valid if the problem is related to moist / corrosion in the connector.
▪ Wiring to Monitor
Run the cable from the camera to the monitor.
▪ Normal / Mirror Image adjustment
The Normal / Mirror image can be changed via the GREEN loop wire:
- Green loop wire un-cut : MIRROR image
- Green loop wire cut : NORMAL image
▪ Caution !!
-
Before making the connection, disconnect the ground terminal from the battery to avoid short circuits.
-
The plugs should be fully inserted into the connectors or jacks. A loose connection may cause malfunctioning of the unit.
-
A damaged cable may affect the operation of the camera and may even cause
a malfunction of the camera or monitor: Avoid a damaged cable! -
Protect the cable by using a guide tube, pipe or run the cable inside the vehicle as much as possible. Caution! Run the cable in natural shapes in order to prevent cable breaks.
-
Preferably use an acid free grease in between the waterproof screw type connectors and tighten them firmly eachother.
* Design And Specifications Are Subject To Change Without Notice.
Documents / Resources
| MXN
MXN44C-TVI Compact Mini Ball HD-TVI Color
Camera
[pdf] Instruction Manual
MXN44C-TVI, Compact Mini Ball HD-TVI Color Camera, Ball HD-TVI Color Camera,
HD-TVI Color Camera, Color Camera, MXN44C-TVI, Camera
---|---