Cox Contour Remote TV Codes: Big EZ Setup Guide & Programming
- June 2, 2024
- Cox
Table of Contents
The COX Big EZ Contour Remote Setup Guide and Codes is a comprehensive manual that provides users with step-by-step instructions on how to set up and program their Big EZ remote. The remote is pre-programmed to operate Contour cable boxes, but users may need to program it for Motorola or Cisco mode if they are using it to control a non-Contour cable box. The manual also includes instructions on how to program the remote for TV power, volume, and mute control, as well as troubleshooting tips for users who encounter issues with their remote. The TV code list included in the manual provides users with a comprehensive list of codes for various TV manufacturers. If users cannot find their TV manufacturer’s code, the manual provides a step-by-step guide on how to search through all available codes. Overall, this manual is an essential tool for users who want to get the most out of their COX Big EZ Contour Remote.
COX Big EZ Contour Remote Setup Guide and Codes
Setting Up your Big EZ Remote
Your remote is preprogrammed to operate Contour cable boxes. If you are using the remote for control of a non-Contour cable box, you may need to program the remote for Motorola or Cisco mode using the steps below:
Step 1. Press the Setup button until the status LED on the remote changes from red to green. Then,
- Press B for control of a Motorola brand cable box.
- Press C for control of a Cisco or Scientific-Atlanta brand cable box.
Note: The status LED will blink green twice when the button is pressed. If you need to re- program the remote for control of an Contour cable box, press A in Step 1.
Step 2. Press the Contour button to verify that the remote controls the cable box as expected.
Programing for TV control:
To program your remote for control of TV Power, Volume and Mute, follow the steps below:
- Install the batteries and make sure your TV and cable box are powered on.
- Refer to the TV Code list included with the remote to locate your TV manufacturer.
- Press and hold the Setup button on the remote until the status LED changes from red to green.
- Enter the first code listed for your TV manufacturer. The status LED should flash green twice when the code is entered.
- Press the TV Power button on the remote. If the TV turns off, you have successfully programmed your remote. Turn the TV back on and verify that the Volume and Mute buttons operate the TV volume as expected.
- If the TV does not turn off or the Volume and Mute buttons do not work, repeat the steps above using the next code listed for your TV manufacturer.
Can’t find your code?
If you can’t program the remote for TV control using the codes provided for your manufacturer, follow the steps below to search through all available codes.
- Turn on your TV.
- Press and hold the Setup button on the remote until the status LED changes from red to green.
- Press the CH+ button repeatedly to search through the manufacturer codes until the TV turns off.
- Once the TV turns off, press the Setup button. The status LED on the remote should flash green twice.
- Press the TV Power button on the remote. If the device turns on, you have successfully programmed the remote for TV contro
General Troubleshooting
Q: Why doesn’t my remote work to control my cable box?
A: This remote is designed to work with Contour, Motorola and Cisco cable
boxes. If you have certain Motorola or Cisco cable boxes, you need to program
the remote for Motorola or Cisco mode. Follow the “Setting up your Big EZ
Remote” steps to program the remote for control of your cable box.
Button Descriptions:
DEVICE CODES
SETUP CODES FOR TV
SPECIFICATION
Product Specifications
|
Description
---|---
Product Name
|
COX Big EZ Contour Remote Setup Guide and Codes
Functionality
|
Programming and setup guide for COX Big EZ Contour Remote
Compatibility
|
Pre-programmed to operate Contour cable boxes, can be programmed for Motorola or Cisco mode for non-Contour cable boxes
Troubleshooting
|
Provides troubleshooting tips for remote issues
TV Code List
|
Includes a comprehensive list of codes for various TV manufacturers
Code Search
|
Provides a step-by-step guide on how to search through all available codes if TV manufacturer’s code is not found
FAQS
What should I do if my COX Big EZ Contour Remote isn’t working to control
my cable box?
If your remote isn’t working to control your cable box, make sure you have followed the “Setting up your Big EZ Remote” steps to program the remote for control of your cable box. If you have followed these steps and the remote still isn’t working, refer to the troubleshooting tips provided in the manual.
What should I do if I can’t find my TV manufacturer’s code in the list
provided?
If you can’t program the remote for TV control using the codes provided for your manufacturer, follow the steps provided in the manual to search through all available codes. Turn on your TV and press and hold the Setup button on the remote until the status LED changes from red to green. Press the CH+ button repeatedly to search through the manufacturer codes until the TV turns off. Once the TV turns off, press the Setup button. The status LED on the remote should flash green twice. Press the TV Power button on the remote. If the device turns on, you have successfully programmed the remote for TV control.
How do I program the COX Big EZ Contour Remote for TV control?
To program the remote for TV Power, Volume and Mute, follow the steps provided in the manual. Install the batteries and make sure your TV and cable box are powered on. Refer to the TV Code list included with the remote to locate your TV manufacturer. Press and hold the Setup button on the remote until the status LED changes from red to green. Enter the first code listed for your TV manufacturer. The status LED should flash green twice when the code is entered. Press the TV Power button on the remote. If the TV turns off, you have successfully programmed your remote.
Is the COX Big EZ Contour Remote pre-programmed to operate all cable boxes?
No, the remote is pre-programmed to operate Contour cable boxes. If you are using it to control a non-Contour cable box, you may need to program it for Motorola or Cisco mode using the steps provided in the manual.
Read More About This Manual & Download PDF:
COX Big EZ Contour Remote Setup Guide and Codes – Optimized
PDF
COX Big EZ Contour Remote Setup Guide and Codes – Original
PDF
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>