kogan KASDA512AJA 5.1 Channel 235W Dolby Atmos Soundbar User Guide

kogan KASDA512AJA 5.1 Channel 235W Dolby Atmos Soundbar

Specifications:

• Channels: 5.1
• Power Output: 235W
• Sound Technology: Dolby Atmos
• Included Components:
  • 1 Soundbar
  • 1 Subwoofer
  • 2 Rear Speakers (1 Passive, 1 Active)
  • 1 Remote Control
  • 1 Remote Control Battery
  • 1 Power Adaptor (for Rear Active Speaker)
  • 1 Rear Speaker Wall Mounting Kit
  • 1 Soundbar Wall Mounting Kit
  • 1 Line In to RCA Cable
  • 1 Power Cord (for Soundbar)
  • 1 User Guide

Product Usage Instructions

Overview:

The soundbar includes various input options such as AUX, USB, HDMI, and Optical In. The rear speakers connect wirelessly and have indicators for channel settings.

Before First Use:

1. Unbox and inspect all components.
2. Identify suitable locations for the soundbar, subwoofer, and rear speakers.
3. Mount the soundbar if required.
4. Power on the soundbar.
5. Connect and pair the rear speakers.
6. Mount the rear speakers if necessary.
7. Connect the subwoofer to the soundbar.

Operation:

Positioning the Soundbar: Place the soundbar horizontally on a flat surface for optimal sound output and airflow.

FAQ

• Q: Can I connect the soundbar to multiple devices simultaneously?
  • A: The soundbar allows you to switch between input sources, but it can only play audio from one device at a time.
• Q: How do I pair the rear speakers with the soundbar?
  • A: To pair the rear speakers, ensure they are powered on and press the pairing button on the soundbar until the pairing indicator lights up.
• Q: Can I adjust the bass and treble levels on this soundbar?
  • A: Yes, you can adjust the Bass, Treble, Centre, and Surround levels using the remote control in the Setup menu.

SAFETY & WARNINGS

Warning

Risk of electric shock. Do not open.

To reduce the risk of electric shock, do not remove the cover or back casing.

Caution

• To reduce the risk of electric shock, do not dismantle the product and do not expose it to rain or moisture.
• Servicing or repair should only be conducted by a qualified professional. If this product is damaged, contact help.Kogan.com for support.
• Always ensure the power plug is easily accessible.

Notice

• Read these instructions carefully and retain this user guide for future reference.
• This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the product.
• To prevent possible hearing damage, do not listen at high volume levels for long time periods or a sudden high-volume level.
• Do not leave this product unsupervised while it is connected to the electrical outlet. Unplug it when not in use.
• This product is not intended to be operated by means of an external timer or separate remote-control system.
• Before operating this product, check the voltage is identical to the voltage of your local power supply.
• Do not cover the ventilation openings with items such as newspaper, tablecloths, curtains etc. Ensure there is at least 20cm of space above and at least 5cm of space on each side of the product.
• Do not expose this product to dripping or splashing liquid. Do not place objects filled with liquids such as vases on the product.
• To prevent a fire or electric shock hazard, do not expose this product to heat, rain, moisture, or dust.
• Do not position this product near any sources of water, e.g. taps, bathtubs, washing machines or swimming pools. Place the product on a dry, stable surface.
• Do not place this product close to a strong magnetic field.
• Do not place this product on an amplifier or receiver.
• Do not place this product in a damp area as the moisture will affect the life of the electrical components.
• Do not attempt to clean the product with chemical solvents, corrosive cleaners, or oils as this may damage the finish. Wipe it with a clean, dry, or slightly damp cloth.
• When removing the power plug from the electrical outlet, always pull directly on the plug, never pull on the cord.
• Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this product while it is also on, lines might appear on the TV. Neither this product nor the TV is malfunctioning. If you see such lines, keep this product well away from the TV.
• Do not drop this product.
• Do not disassemble this product.
• Avoid extreme temperatures. Do not install this product near any sources of heat, such as radiators, heaters, stoves, or amplifiers.
• Position the power cord where it will not be pinched, stepped on or tripped over.
• Only use the original or certified cables, attachments or accessories specified by Kogan.com.
• Do not use this product outdoors.
• Unplug this product during lightning storms or when unused for long periods of time.
• If the power cord is damaged, cease use immediately and contact help.Kogan.com for support.
• Operate this product only as instructed in this user guide.
• Do not remove any screws or open the casing to gain access to the inside of the product. If the product is damaged, contact help.Kogan.com for support

COMPONENTS

OVERVIEW

digital device.
8| USB| For software upgrade only (can’t play MP3 music).

Rear Speakers

left)
3| Pairing Indicator| Indicates the pairing between soundbar and wireless surround speaker
4| USB| For software upgrade only.
5| DC IN| Connect to power.
6| SR Indicator| Illuminates when the channel is set to SR (surround right).

7

| ****

SL/SR Switch

| • Press to switch the speakers between ‘SL’ and ‘SR’.
• Press and hold to pair the rear speakers with the soundbar.
---|---|---

Subwoofer

Remote Control

4

| ****

Play/Pause/Mute

| ·   Press to play/ pause (in USB & BT modes only).

·   Press to mute (in Aux, Optical & HDMI eARC modes only).

5| – Volume| Decrease master volume.

6

| ****

EQ

| ·   Press to toggle between Music, Movie, News and Sport mode.

·   Press and hold to return to factory default settings .

---|---|---
7| Input| Select an input source: AUX, USB, HDMI eARC, Optical, Bluetooth.

8

| ****

Pair

| ·   In Bluetooth mode, press and hold for more than 2 seconds for Bluetooth device pairing or to reconnect the last paired Bluetooth device.

·   In eARC/ Optical modes, press to check the signal format bases on device with a Dolby decoder.

9| Next| Next track (in USB & BT modes only).

10

| ****

Setup

| Press to setup:

·   Bass level +/- (-5-5, 0 by default).

·   Treble level +/- (-5-5, 0 by default).

·   Centre level +/ – (-5-5, 0 by default).

·   Surround level +/- (-5-5, 0 by default).

11| Increase| In the Setup menu, press to increase the Bass, Treble, Centre and Surround level.
12| Decrease| In the Setup menu, press to decrease the Bass, Treble, Centre and Surround level.

BEFORE FIRST USE

Unpacking

• Remove the soundbar from the box and remove all packing material from the soundbar. Save the packing material, if possible, in case the soundbar ever needs to be serviced or transported. The original box and packing material are the only safe way to pack your soundbar to protect it from damage in transit.
• Remove any descriptive labels or stickers on the front or top of the soundbar. Do not remove any labels or stickers from the back or bottom.
• Place the soundbar on a level surface such as a table, desk or shelf, located closely to an electrical outlet, out of direct sunlight and away from sources of excess heat, dirt, dust, moisture, humidity or vibration.
• Unwind the power cord and extend it to its full length.

Protect Your Furniture

• This soundbar is equipped with non-skid rubber feet to prevent the soundbar from moving.
• These feet are made from non-migrating rubber material especially formulated to avoid leaving any marks or stains on your furniture. However, certain types of oil-based furniture polishes, wood preservatives or cleaning sprays may cause the rubber feet to soften and leave marks or a rubber residue on the furniture.
• To prevent any damage to your furniture, it is strongly recommended that you purchase small self-adhesive felt pads, available at hardware stores and home improvement stores, and apply these pads to the bottom of the rubber feet before use.

Positioning

• Do not install the soundbar in the following locations:
• Places exposed to direct sunlight or close to radiators.
• On top of other stereo equipment that radiate too much heat.
• Areas blocking ventilation holes.
• Areas where there is constant vibration.
• Humid, moist or dusty places.
• Near candles or other flames.

Recommended Order of Operations:

This order of operations ensures that the mounting process is integrated into the setup, considering the need for accessibility to the rear speakers’ pairing button.

1. Unboxing and inspection.
2. Identify a suitable location for the soundbar, subwoofer and rear speakers. If wall-mounting, consider the optimal positions for brackets.
3. Mount the soundbar (if required).
4. Power on the soundbar.
5. Power the rear speakers and connect the passive speaker to the active speaker.
6. Pair the rear speakers.
7. Mount the rear speakers (if required).
8. Connect the subwoofer to the soundbar.

OPERATION

Positioning the Soundbar

Place on a flat surface:

Place the soundbar horizontally on a flat surface such as a shelf and align it centrally with the TV screen. Allow some space between the speaker and the wall. Don’t place the soundbar inside a cabinet or a walled shelf. Follow this guidance for best sound output and good airflow around the soundbar.

Mount on the wall:

WARNING: If you are not confident in correctly and securely wall-mounting the soundbar, consult a licensed professional

Install the speaker on a vertical, reinforced area of wall. For plaster walls, it is recommended to screw into wall anchors for greater security. For optimum performance, allow at least 25mm distance between the soundbar and the TV .

1. Drill 2 holes in the wall the same distance apart as the wall bracket on the soundbar.
2. Place the wall anchors into the holes and secure with the screws. Do not tighten the screws all the way; ensure some space is remaining.
3. Attach the 2 EVA pads onto the bracket. This will ensure that there is enough room between the wall and the soundbar outlet (minimum 15mm).
4. Once the screws are securely fastened, hang the soundbar by inserting the screws into the wall bracket.

Mount the Rear Speakers

Note:

Pair and configure the rear speakers before wall mounting.

1. Drill 2 holes in the wall the same distance apart as the two rear speakers. Then, drill another hole under each hole the same distance apart as the bracket holes.
2. Place the wall anchors into the bracket holes and secure with screws to ensure the brackets do not shake.
3. Attach the 2 EVA pads to the brackets. Align the bracket hole with the hole in the speaker and place the speakers on the EVA pads and.
4. Insert the screws into the bracket holes and through the holes in the speaker and tighten.

Basic Operation

1. Press the Power button on either the remote control or the soundbar to turn on the soundbar. The default input mode will appear on the display.
2. Switch on the connected device (such as TV, playback device, game console etc).
3. Press the Input button on either the remote control or the soundbar to select your desired input source.

Powering On/Off

1. Plug one end of the power cord into the AC IN port on the soundbar and the other end into an electrical outlet (see the following diagram). The soundbar will be in standby mode, and *-‘ will illuminate on the display.
2. Turn the soundbar on by pressing the Power button on soundbar or the remote control. The default input mode will automatically appear on the display.
3. Press and hold the Power button on the soundbar or the remote control for 2 seconds to switch it off. Then, if you want to switch the soundbar off completely,   disconnect the power plug from the electrical outlet.

Auto Sleep

• The display will turn off after 10 seconds of no user input.
• Press the Power button on the soundbar or remote control, or the connected device’s volume buttons to wake the display up again.

Pair the Soundbar with the Rear Speakers

1. Press the Power button to turn on the soundbar. Then, press the Input button on the soundbar to switch to Bluetooth (BT) mode.
2. Power on the rear speakers. The Pairing indicator on the rear speaker will slowly flash blue to indicate it is in pairing mode.
3. Press and hold the Switch on the bottom of the rear speaker for 2.5 seconds. The Pairing indicator will flash quickly.
4. After about 20-30 seconds, the Pairing indicator will turn solid and the soundbar and rear speakers will be paired successfully.
5. The soundbar and rear speakers will pair automatically after the initial successful pairing, even if they are switched off and on.
6. To pair your rear speakers with another soundbar, repeat steps 1-4. Ensure that the soundbar you want to pair with and the rear speakers are within range, turned on and any other pairing devices are switched off or on standby.

Notes:

• If the wireless surround speaker is turned on, but the sound bar is in standby mode or turned off (no power), the Pairing indicator on the rear speaker will turn solid red and stay on after about 3 minutes.
• To avoid wireless signal interference when the soundbar and rear speakers are in use, keep the soundbar and rear speakers away from other wireless devices.
• The maximum connection distance between the sound bar and rear speakers is 10m of open space.
• Add the subwoofer connector to the sub-out port on the soundbar

Playing Audio via BT Connection

1. Turn on the soundbar and then press the Input button on soundbar or remote control to switch to BT mode. The display will illuminate and ‘bt’ will flash.
2. Enter the Bluetooth settings on your device and select ‘Kogan 5.1 Soundbar’.
3. When successfully paired, an audio tone will play and ‘be’ will illuminate solidly on the display.
4. To connect to other devices, repeat the above pairing steps.

Notes:

• If the paired device is switched off or manually disconnected, the soundbar will automatically enter pairing mode.
• If the connected device is switched off or manually disconnected, the soundbar will automatically enter pairing mode. The device and the soundbar will automatically pair again when the device re-enters the connection range (10 meters).

Playing Audio via USB

The soundbar automatically switches to USB mode and illuminates on the display when a USB flash drive is inserted. This mode isn’t selectable on the soundbar or remote control unless a USB flash drive is connected.

1. Ensure that your USB flash drive contains MP3, WMA, FLAC, or WAV audio files (other file types are not supported).
2. Connect the USB flash drive to the USB port on the soundbar (or your own USB extension cable connected to the USB port). Audio will automatically play.

CONNECTIVITY

Audio (Aux) Connection

1. Connect the soundbar to your PC, laptop, smart-phone, TV or other audio device using the provided AUX cord. Ensure the device has both an AUX IN and an AUX OUT port.
2. Then press the Input button on remote control or soundbar to switch the soundbar to Aux mode. The display will illuminate AUX and the music on your connected device will play. Playback can only be controlled on your connected device.

Note:

For some computers, you may need to access the audio control panel to manually connect the soundbar

HDMI IN eARC Mode

Some 4K HDR TVs require the HDMI input or picture settings to be set for HDR content reception. For further setup details on HDR display, refer to the instruction manual of your TV.

Requirements:

• Audio: maximum supported audio content is Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby True HD, Dolby Surround.
• HDMI: HDMI version 2.1.

e-ARC (Enhanced Audio Return Channel):

This soundbar supports HDMI with enhanced Audio Return Channel (e-ARC). If your TV is HDMI e-ARC compliant, you can hear the TV audio through your soundbar by using a single HDMI cable.

1. Connect one end of a high speed HDMI cable (not provided) to the HDMI IN eARC port on the soundbar and the other end to the HDMI (e-ARC) connector on your TV.
2. Press the Input button on the soundbar or the remote control to switch to HDMI IN eARC mode. When successfully connected, ‘ERRE’ will illuminate on the display. If your TV supports HDMI ARC, ‘ARC’ will illuminate on the display.

Notes:

• Your TV must support the HDMI-CEC and e-ARC functions. HDMI-CEC and e- ARC must be on.
• The set up method of HDMI-CEC and e-ARC may differ depending on the TV. For details about e-ARC function, refer to your TV’s manual.
• Only HDMI 1.4 compatible cables support the e-ARC function.

Optical Mode

1. Connect one end of the optical cable to the optical output port of your TV and the other end to the optical input of your soundbar.
2. Turn on the TV and the soundbar. Set the TV to Dolby or Auto mode.
3. Press the Input button on the remote control or on the soundbar to select Optical mode.

Note:

• When connecting a device such as a TV, set-top box, DVD player, game console with an optical cable, set the audio output mode of the device to Dolby or Auto mode (digital optical output).
• Do not bend the optical cable to prevent damaging the internal wiring

SPECIFICATIONS

• Output Power 30W x 5 + 85W = 235W
• Bluetooth Version 5.3
• Frequency Response 45Hz-20KHz
• Dimensions
  • Soundbar: 73H x 100D x 960L mm
  • Subwoofer: 190W x 367H x 306D mm
  • Speakers: 73H x 100D x 190L mm

TROUBLESHOOTING

volume level on the soundbar or by remote control or on the TV.
| The power cord is not connected properly.| Ensure that the power cable is securely connected to an electrical outlet.

There is no sound output from the soundbar.

| Input ports on a playback device are connected.| Connect the input port on the soundbar and the output port on the playback device.
| ·   When the soundbar and TV or other devices are connected by an audio cable through the HDMI eARC output port, select the correct audio input and output.
| Incorrect input selected.| ·   Ensure the digital audio output setting on the playback device is in PCM format. Since the output format of the soundbar is PCM, if it is used, the decoding format of TV or other devices will be adjusted to PCM state.
The sound is distorted or echoed.| ****

TV volume is not muted.

| If you play audio from a TV through the soundbar, make sure that the TV is muted.
| The automatic volume|
---|---|---
| adjustment function is|
The volume decreases when the soundbar is turned on.| activated. To prevent excessive loudness, the soundbar automatically

controls its volume within a

| ****

Turn up the volume as required.

| certain level when the|
| soundbar is turned on.|

Noise is heard.

| The soundbar is too close to another digital or high-frequency device.| Move those devices away from the sound bar.

The soundbar cannot be operated using the remote control.

| The soundbar is out of the operating range.| Use the remote control within the operating range.
The batteries are weak.| Replace with new batteries.
The remote-control sensor of the soundbar is exposed to direct sunlight or strong lighting.| Adjust the lighting angle or reposition the soundbar. The soundbar cannot be used in sunlight.
The TV cannot be operated using the

| The soundbar is blocking

-control

sensor.

| Position the soundbar so that it

remote-control sensor.

| | ·   Restart the soundbar and try pairing again.

A device cannot connect to the soundbar or the soundbar cannot be connected to a Bluetooth device.

| ****

The Bluetooth function of the device is not activated, not paired or connected correctly.

| ·   You have not enabled the Bluetooth function of the device; see the user guide of the device on how to enable the function and correctly connect the device.

·   The sound bar is already connected with another Bluetooth device. Disconnect the connected device and try again.

| Bluetooth is not selected as the input source.| Select Bluetooth as the Input source.
| The soundbar is connected to a different Bluetooth device.| Un-pair the Bluetooth device that is currently connected and pair with the desired Bluetooth device.
| The soundbar is too far away from the Bluetooth device.| Move the Bluetooth device closer to the soundbar.
---|---|---
A device emitting|
electromagnetic waves| Do not use this product near
(such as a microwave oven,| devices that emit
a wireless device, etc.) may| electromagnetic waves.
be placed nearby.|
The Bluetooth device that you are using may not support the protocol.| Use a Bluetooth device that supports the protocol.
The connection profile| Delete the connection profile in
registered in the Bluetooth| Bluetooth devices and then
device may not be| connect the Bluetooth device to
functioning correctly.| this product.
Quality of audio| |
played from a| | Move the device closer to the
connected Bluetooth| The Bluetooth reception is| soundbar or remove any
device is poor and| poor.| obstacle between the device
connection is not| | and the soundbar.
stable.| |
| The volume on the Bluetooth device may be too low.| Raise the volume on the Bluetooth device.
| Bluetooth is not selected as| Select the Bluetooth as the Input
| the Input source.| source.
| Playback on the device has| Perform playback on the device.
No sound can be| not been performed.
heard or the sound breaks (Bluetooth mode).| The sound output on the Bluetooth device may not be set to this soundbar.| Select this soundbar as the output device on the Bluetooth device.
| The connection to the Bluetooth device was cut off.| Connect to the Bluetooth device again.
| The soundbar may be too far away from the Bluetooth device.| Move the Bluetooth device near the soundbar.
| A device emitting electromagnetic waves (such as a microwave oven, a wireless device, etc.) may be placed nearby.| ****

Do not use this soundbar near device that emit electromagnetic waves.

---|---|---
| | ·   Connect the TV and soundbar using a 19-core HDMI cable.

There is no sound coming from the soundbar (HDMI eARC Mode).

| ****

The incorrect HDMI cable is used, causing no signal to be sent to the soundbar.

Incorrect input mode is

selected.

| ·   Connect t he soundbar and TV through an HDMI eARC output port .

·   Ensure that the TV is HDMI eARC or HDMI ARC compliant.

| | ·   Set the TV to HDMI eARC or HDMI ARC (CEC). Set the audio output mode of TV to PCM format (or refer to your TV user guide).

There is no sound coming from the soundbar (Optical Mode)

| The optical cable might be damaged, or no signal is received by the soundbar due to a failed connection and incorrect operation mode selected.| ·   Replace the optical cable with a new one to connect.

·   Set your TV audio output to PCM format (or refer to your TV user guide).

There is no sound coming from the soundbar (USB mode).

| The USB file type is not supported.| Ensure that the USB flash drive contains MP3 files because other file types are not supported.
The s

switch to USB Input mode automatically when the

| ****

Switch the Input mode and playback again.

| USB is inserted.|

The soundbar is disconnected from the rear speakers.

| ****

Connection between the rear speakers and the soundbar is not correct.

| ·   Turn off the soundbar and rear speakers by removing the power plug from the electrical outlet .

·   Ensure the soundbar and rear speakers are connected to the electricity at the same time, then switch on the soundbar and rear speakers again.

---|---|---
There is no sound coming from the rear active speaker.| ****

Power input or pairing issue.

| ·   Check the adaptor Input.

·   Pair again with the soundbar.

There is no sound output from the rear passive speaker.| ****

Cable connection issue.

| Check connected cable between active rear speaker again.
Inverse channel from R to L.| Speaker position confusion.| Press the R/L switch button on the active rear speaker.

Noise is coming from the rear speakers.

| ****

Bluetooth is connecting or poor signal.

| ·   Re-pair with the soundbar again.

·   Power the soundbar and rear active speakers off/on again .

Dolby Atmos

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Dolby Vision, Dolby Atmos and the double-D symbol are trademarks of Dolby Laboratories.

What is DOLBY ATMOS®?

Dolby Atmos® transports you from the ordinary into the extraordinary with breathtaking, moving audio that fills your room and flows above and around you. Dolby Atmos gives you amazing experience you have never heard before by overhead sound and all the richness, clarity and power of Dolby sound.

Using DOLBY ATMOS®:

DOLBY ATMOS is only available in HDMI (e-ARC) mode. For the details of the connection, please refer to HDMI Connection.

1. To use Dolby Atmos® in HDMI (e-ARC) mode, your TV must support Dolby Atmos®.
2. Make sure that No Encoding is selected for bitstream in the digital audio output of the connected external device (e.g. Blu-ray DVD player, TV etc.).
3. While entering Dolby Atmos/Dolby Digital Plus format, the soundbar will show DOLBY ATMOS/DOLBY SURROUND.

Note:

• The full Dolby Atmos experience is only available when the Soundbar is connected to the source using a HDMI 2.0 cable.
• The soundbar will still function when connected via other methods (such as a Digital Optical cable), but these are unable to support all the Dolby features. Given this, the recommendation is to connect via HDMI, to ensure full Dolby support

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>