ZAMEL mSLW-01 RGBWW Wi-Fi LED Controller User Manual

ZAMEL mSLW-01 RGBWW Wi-Fi LED Controller

RGBWW Wi-Fi LED Controller – mSLW-01

Specifications

• Rated power consumption: 0.4 W
• Transmission: Wi-Fi 2.4 GHz b/g/n
• Maximum transmit power: ERP < 20 mW
• Number of inputs: 1
• Number of output channels: 3 x PWM transistor
• Number of terminals: 6 (conductor cross-section up to 2.5 mm2)
• Enclosure protection rating: IP20
• Dimensions: 47.5 x 47.5 x 20 mm
• Weight: 0.05 kg
• Maximum output current-carrying capacity:

Product Usage Instructions

Step 1: Install the Supla Mobile App
Download, install, and launch the Supla mobile app on your smartphone.

Step 2: Creating a Supla Account
If you do not have an account:

• Create it by tapping ‘Create Account’ in the app.
• Enter your email, password, and accept the Terms and Conditions.
• Confirm all information by tapping ‘Create an account’.

If you already have an account :

• Enter the email address used to create the account.
• Sign in with your credentials.

Step 3: Connect to the Power Supply
Connect the mSLW-01 device to the power supply following the wiring diagram provided.

Step 4: Adding the Device Automatically
Open the Supla mobile app, select ‘Add device’ from the menu, and follow the instructions on the Add Device Wizard to connect your device to the server.

FAQ

• Q: What should I do if the device’s STATUS LED does not respond as expected?
  A: If the STATUS LED does not respond as shown in the animation on screen, switch the device into configuration mode by holding the CONFIG button and then press the START button to retry.

• Q: Where can I find the EU Declaration of Conformity for the mSLW-01 device?
  A: The entire EU Declaration of Conformity is available at www.zamel.com for reference.

USER’S MANUAL

RGBWW Wi-Fi LED controller

supla mSLW-01BEFORE GETTING STARTED FEATURES

• Easy installation – just connect RGBW LED strip with mSLW-01 device.
• Once the RGBW LED strip is connected to the controller and concealed in an electrical box, local and remote control is possible, in the app the device is shown as RGBW lighting, which can be controlled by means of two sliders – one to select the colour and the other to adjust brightness,
• Easy installation – just connect RGBW LED strip with mSLW-01 device.
• Once the RGBW LED strip is connected to the controller and concealed in an electrical box, local and remote control is possible, in the app the device is shown as RGBW lighting, which can be controlled by means of two sliders – one to select the colour and the other to adjust brightness,

WHAT YOU NEED TO GET STARTED:

• screwdriver / pliers,
• max. 2.5 mm2 cable for connecting the power supply,
• qualification certificate for voltages up to 1 kV is recommended.

WARNING

The device must be connected to power supply in accordance with applicable electrical and safety standards or regulations. See this User Manual for the wiring instructions. Installation, wiring and setting of this  product shall only be done by qualified electrical engineers who have read and understood this User Manual and the product features. Do not open or otherwise disassemble the product enclosure; otherwise the product warranty will be void and an electrocution hazard may occur. Prior to installing and wiring this product, make sure that the wiring to be connected is not live. The conditions and methods of transport, storage and operation of this product may affect its performance. Do not install the product if any of its components is missing, the product is damaged or deformed in any way. If any malfunctions are found, consult the manufacturer.

• ZAMEL Sp. z o.o. hereby declares that the type of mSLW-01 radio device complies with Directive 2014/53/EU. The entire EU declaration of conformity is available at: www.zamel.com
• Do not dispose of this device with other waste! In order to avoid harmful effects on the environment and human health, the used device should be stored in designated areas. For this purpose, you can dispose of household waste free of charge and in any quantity to a collection point set up, as well as to the shop when you buy new equipment.

TECHNICAL DATA

GETTING STARTED IN 5 STEPS

LET’S GET STARTED

download, install and launch the supla mobile app

STEP 1  install the app

1. INSTALL THE SUPLA MOBILE APP

STEP 2
create an account / log in

CREATING A SUPLA ACCOUNT
IF YOU DO NOT HAVE AN ACCOUNT
Create it by tapping “Create Account” in your app.

CREATE AN ACCOUNT
On this page, enter the following data:

• e-mail address,
• password,
• password confirmation.
• Confirm all information by tapping “Create an account”.

STEP  3 connect to the power supply

WIRING DIAGRAM
Connect the mSLW-01 device to the installation according to the following diagram.

STEP 4 add the device

ADDING THE DEVICE AUTOMATICALLY

OPEN THE APP
Then select “Add device” from the menu.

STARTING THE WIZARD
The Add Device Wizard will appear. To continue, press the “Next” button.

• NETWORK PASSWORD Choose a WiFi network to enable Internet connectivity for the device. Enter the network password and tap “Next” to continue.

• CONNECTING THE DEVICE Wire the power supply to the device as shown in the diagram. Make sure that the device STATUS LED responds as shown in the animation on screen. If it does not, switch the device into the configuration mode by holding the CONFIG button on the device. Next, press the START button.

• NEW DEVICE REGISTRATION DISABLED

• If the “New Device Registration Disabled” message is displayed, open this website: https://cloud.supla.org/,

• Log into your account, go to the “My SUPLA” tab and Enable Device Registration. Next, repeat the device adding process.

• DEVICE ADDED SUCCESSFULLY

• Adding a device is simple and should end without any problems. If the device is added successfully, the following message is displayed: “Device configuration successful”. Tap OK. Now, the supla app should display the device which you have just added on the list. The mSLW-01 STATUS LED in the front goes on steadily when the connection with the server is active.

• CAUTION!
  If the connected device is not shown on the list immediately once the configuration is complete, check the device STATUS LED. When added for the first time, the STATUS LED of some devices may flash very fast and irregularly. This happens when the device controller is updating its firm- ware. A moment after the update, the STATUS LED should go on steadily which means there is an active connection with the server.

• ADDING THE DEVICE MANUALLY
  Add the device manually when the automatic device adding mode of the supla app fails somehow.

• DEVICE CONFIGURATION MODE
  To do this, switch the device into the configuration mode by pressing and holding the CONFIG button until the STATUS LED starts to flash.

• CONFIGURING THE DEVICE

• Now, find the device in the available Wi-Fi network list on your mobile device and connect to it. The Wi-Fi network name should begin with
  “ZAMEL-mSLW-01”, followed by the device serial number.

• Open a web browser and type the following address in the address bar: 192.168.4.1 and open it.

• The configuration page will be displayed. Here, you can easily change the network settings.

• When done, tap “SAVE”  at the bottom of the screen. The message “Data saved!” should be displayed. To confirm the entered data, briefly press the CONFIG button on the device. If the device connects to the server successfully, the STATUS LED will go on steadily.

STEP 5 control the lights

APP FUNCTIONS

SETTING PARAMETERS RGBW LED

RESETTING THE DEVICE
RESETTING THE DEVICE TO DEFAULT SETTINGS

1. Press and hold CONFIG
   The STATUS LED should flash fast.

2. Release the CONFIG button The STATUS LED will continue to flash.

3. Press and hold CONFIG again The STATUS LED should blink once.

4. Release the CONFIG button The device has been reset to defaults and restarts now. The STATUS LED should flash fast.

WARRANTY

1. ZAMEL Sp. z o.o. grants a 24-month warranty for the products it sells.
2. The warranty granted by ZAMEL Sp. z o.o. does not cover:
3. defects caused by transport, handling or other factors;
4. defects caused by improper installation or operation of the products manufactured ZAMEL Sp. z o.o.;
5. defects caused by any modifications or alterations made by the BUYER or any third party to the sold products or to the equipment required for the proper operation of the sold products;
6. defects caused by any force majeure event or another fortuitous event beyond any reasonable control of ZAMEL Sp. z o.o.
7. The BUYER shall report all warranty claims in writing at the point of sale or to ZAMEL Sp. z o.o.
8. ZAMEL Sp. z o.o. will examine each warranty claim as regulated by the applicable provisions of the Polish law.
9. If found valid by examination, the warranty claim will be processed by replacement of the defective product, its repair or a refund of the price of purchase at the sole discretion of ZAMEL Sp. z o.o.
10. No rights of the BUYER arising from the statutory or regulatory laws concerning implied warranty for defects of sold goods are limited, prejudiced or excluded by this warranty

References

• SUPLA Cloud
• SUPLA Cloud

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>