Zamel supla ROW-01/16A Flush Mounted 1 Channel Wi-Fi receiver User Manual

Zamel supla ROW-01/16A Flush Mounted 1 Channel Wi-Fi receiver

Product Information

• The Flush mounted 1-channel Wi-Fi receiver supla ROW-01/16A is a device that offers remote control capabilities for your electrical devices through a mobile application. It is equipped with a Wi-Fi module that enables the user to control their devices from anywhere the world, as long as they have a stable internet connection.
• The device has a compact design that allows it to be installed easily in any flush-mounted box. It has a power rating of 230V AC 50/60 Hz and consumes 0.45W, making it an energy-efficient device.
• The Flush mounted 1-channel Wi-Fi receiver supla ROW-01/16A has a transmission range of up to 20mW, making it suitable for use in homes, offices, and other small-scale applications. It has two monostable (bell buttons) and bistable (standard light switches without backlight function) inputs and one normally open voltage-free contact output channel with a maximum output current-carrying capacity of 16A / 250 V AC1 4000 VA.

Technical Data

• Rated supply voltage: 230 V AC
• Rated mains frequency: 50 / 60 Hz
• Rated power consumption: 0.45 W
• Transmission: Wi-Fi 2.4 GHz 802.11 b/g/n
• Transmission range: up to 20mW
• Maximum transmit power: ERP < 20mW
• Number of inputs: 2 (monostable and bistable)
• Compatible connectors: standard light switches without backlight function and bell buttons
• Number of output channels: 1 (normally open voltage-free contact)
• Relay contact parameters: 16 A / 250 VAC1 4000 VA
• Number of terminals: 3 (IN1, IN2, and N)
• Enclosure installation: flush-mounted
• Operating temperature range: N/A
• Enclosure protection rating: N/A
• Dimensions: N/A
• Weight: N/A
• Maximum output current-carrying capacity: 16 A / 250 V AC1 4000 VA

Product Usage Instructions

1. Download and install the Supla mobile app from your app store.
2. Create an account or log in to your existing account.
3. Connect the device to the power supply according to the wiring diagram provided in the user manual.
4. Add the device to the mobile app by selecting “Add device” from the menu and following the instructions provided in the app.
5. You can now use the mobile app to remotely control your electrical devices connected to the Flush mounted 1-channel Wi-Fi receiver supla ROW-01/16A.

BEFORE GETTING STARTED

RECEIVER FEATURES:

• installation easy to assemble and configure,
• additional wiring not required,
• Wi-Fi communication.

WHAT’S INSIDE THE BOX

• ROW-01/16A device
• user’s manual

WHAT YOU NEED TO GET STARTED

• screwdriver / pliers
• max. 2.5 mm2 cable for connecting the power supply qualification certificate for voltages up to 1 kV is recommended

WARNING

The device must be connected to power supply in accordance with applicable elec-trical and safety standards or regulations. See this User Manual for the wiring instruc-tions. Installation, wiring and setting of this  product shall only be done by qualified electrical engineers who have read and understood this User Manual and the product features. Do not open or otherwise disassemble the product enclosure; otherwise the product warranty will be void and an electrocution hazard may occur. Prior to installing and wiring this product, make sure that the wiring to be con-nected is not live. The conditions and methods of transport, storage and operation of this product may affect its perfor-mance. Do not install the product if any of its components is missing, the product is damaged or deformed in any way. If any malfunctions are found, consult the manufacturer.
ZAMEL Sp. z o.o. hereby declares that the type of ROW-01/16A radio device complies with Directive 2014/53/EU. The entire EU declaration of conformity is available at: www.zamel.com

INFORMATION

During installation, make sure that the receiver is not exposed to direct contact with water and that it does not operate in a humid environment. The installation place temperature should be within the range of -10 and +55°C.
The ROW-01/16A receiver is designed for indoor installa-tion. When installed outdoors, the device should be placed in an additional enclosure of hermetic type and protected against water penetration – in particular where connection terminals are located.

TECHNICAL DATA

GETTING STARTED IN 5 STEPS

LET’S GET STARTED download, install and launch the supla mobile app

**install the app

**

STEP 1
INSTALL THE SUPLA MOBILE APP

create an account / log in

STEP 2
CREATING A SUPLA ACCOUNT

IF YOU DO NOT HAVE AN ACCOUNT
Create it by tapping “Create Account” in your app.

connect to the power supply

STEP 3
WIRING DIAGRAM
Connect the ROW-01/16A device to the installation according to the following diagram.

add the device

STEP 4
ADDING THE DEVICE AUTOMATICALLY

• NETWORK PASSWORD Choose a WiFi network
  to enable Internet connectivity for the device. Enter the network password and tap “Next” to continue.

• CONNECTING THE DEVICE Wire the power supply
  to the device as shown in the diagram. Make sure that the device STATUS LED responds as shown in the animation on screen. If it does not, switch the device into the configuration mode by holding the CONFIG button on the device. Next, press the START button.

• NEW DEVICE REGISTRATION DISABLED
  If the “New Device Registration Disabled” message is displayed, open this website: https://cloud.supla.org/,
  Log into your account, go to the “My SUPLA” tab and Enable Device Registration. Next, repeat the device adding process.

• DEVICE ADDED SUCCESSFULLY Adding a device is simple
  and should end without any problems. If the device is added successfully, the following message is displayed: “Device configuration successful”. Tap OK. Now, the supla app should display the device which you have just added on the list. The ROW-01/16A STATUS LED in the front goes on steadily when the connection with the server is active.
  CAUTION!
  If the connected device is not shown on the list immediately once the configuration is complete, check the device STATUS LED. When added for the first time, the STATUS LED of some devices may flash very fast and irregularly. This happens when the device controller is updating its firm- ware. A moment after the update, the STATUS LED should go on steadily which means there is an active connection with the server.
  ADDING THE DEVICE MANUALLY
  Add the device manually when the automatic device adding mode of the supla app fails somehow.

• DEVICE CONFIGURATION MODE
  To do this, switch the device into the configuration mode by pressing and holding the CONFIG button until the STATUS LED starts to flash.

• CONFIGURING THE DEVICE
  Now, find the device in the available Wi-Fi network list on your mobile device and connect to it. The Wi-Fi network name should begin with “ZAMEL- ROW-01/16A”, followed by the device serial number.

• Open a web browser and type the following address in the address bar: 192.168.4.1 and open it.
  The configuration page will be displayed. Here, you can easily change the network settings.

• When done, tap “SAVE” at the bottom of the screen.
  The message “Data saved!” should be displayed. To confirm the entered data, briefly press the CONFIG button on the device. If the device connects to the server successfully, the STATUS LED will go on steadily.

control the lights

STEP 5
APP FUNCTIONS

CHANNEL GROUPS
Channel groups allow several channels to be controlled with only one app button. For channels to be grouped together, they must be of the same type, e.g. light switches can only be grouped with light switches, roller shutters with roller shutters etc. Channel groups may also be associated with schedules, e.g. adding a group with e.g. 4 light control-lers to one schedule.

CREATING A CHANNEL GROUP

1. Press “Automation” from the menu and then select the “Channel groups” option.
2. Press “Add new channel group”. A new channel group will be displayed at the bottom.
3. Press “Choose the first channel to define and save the group function”.
4. Select the first channel; it will define the function of other channels e.g. when a light switch channel is selected, only light switches can be added to it.
5. Press the “Add” button. When the first channel is added, a group is created and its ID is visible at the top.
6. Select another channel and press “Add”. Channels with be displayed next to each other as additional squares.
7. After adding more channels, you can name it in the group details to make it more recognisable.
8. Save the changes by pressing the button on the right.

CONTROLLING A CHANNEL GROUP USING THE APP

1. Open the SUPLA app on your smartphone.
2. Switch to the channel group view (three dots) in the upper right corner of the app.
3. A channel group with the name previously entered should appear. From now on, you can control the group exactly the same way as a single device.

**RESETTING THE DEVICE

**

RESETTING THE DEVICE TO DEFAULT SETTINGS

1. 2. Release the CONFIG button
      The STATUS LED will continue to flash.

2. Press and hold CONFIG again
   The STATUS LED should blink once.

3. Release the CONFIGbutton
   The device has been reset to defaults and restarts now. The STATUS LED should flash fast

MORE INFORMATION

Additional information and video material You can find by scanning QR code or by using the following link: https://supla.zamel.com/en/product/row-01-16a/

WARRANTY

1. ZAMEL Sp. z o.o. grants a 24-month warranty for the products it sells.
2. The warranty granted by ZAMEL Sp. z o.o. does not cover:
   • (a) defects caused by transport, handling or other factors;
   • (b) defects caused by improper installation or operation of the products manufactured ZAMEL Sp. z o.o.;
   • (c) defects caused by any modifications or alterations made by the BUYER or any third party to the sold products or to the equipment required for the proper operation of the sold products;
   • (d) defects caused by any force majeure event or another fortuitous event beyond any reasonable control of ZAMEL Sp. z o.o.
3. The BUYER shall report all warranty claims in writing at the point of sale or to ZAMEL Sp. z o.o.
4. ZAMEL Sp. z o.o. will examine each warranty claim as regulated by the applicable provisions of the Polish law.
5. If found valid by examination, the warranty claim will be processed by replacement of the defective product, its repair or a refund of the price of purchase at the sole discretion of ZAMEL Sp. z o.o.
6. No rights of the BUYER arising from the statutory or regulatory laws concerning implied warranty for defects of sold goods are limited, prejudiced or excluded by this warranty.

References

• SUPLA Cloud
• SUPLA Cloud
• ODBIORNIK WI-FI DOPUSZKOWY 1-KANAŁOWY 16 A, DWUKIERUNKOWY – Supla

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>