TEAM ASSOCIATED MT12 Monster Truck User Guide
- June 1, 2024
- TEAM ASSOCIATED
Table of Contents
TEAM ASSOCIATED MT12 Monster Truck
Product Information
Specifications
- M2 x 10mm SRH Screw (x8) #41072
- M3 x 20mm BHCS (x8) #25188
- M3 x 6mm FHCS (x2) #31541
- 5 x 10 x 4mm BEARINGS (x4) #91560
- 10 x 15 x 4mm BEARINGS (x4) #91563
- MT380 BRUSHED MOTOR #41105
- MT12 PINION GEAR,15T #41106
- MT12 WHEELS AND TYRES [CHROME] #41104
- MT12 BODY SET, RTR [RED] #41100
- MT12 BODY SET, RTR [CLEAR] #41101
- MT12 DECAL SHEET #41102
- MT12 BODY ACCESSORIES [CHROME] #41103
Product Usage Instructions
Assembling the Product
- Identify all the components listed in the specifications.
- Start by attaching the M2 x 10mm SRH Screws using a screwdriver.
- Proceed to connect the M3 x 20mm BHCS and M3 x 6mm FHCS as indicated in the manual.
- Install the bearings carefully according to their sizes.
- Mount the MT380 Brushed Motor and MT12 Pinion Gear following the provided instructions.
- Complete the assembly by fixing the MT12 Wheels and Tyres, Body Set, and Accessories.
Maintenance and Care
Regularly check and tighten all screws to ensure stability and safety. Clean
the product with a soft cloth to maintain its appearance.
Battery Information
Use only the recommended batteries for this product to avoid damage. Follow
proper charging procedures as outlined in the manual.
FAQs
Q: How do I replace the bearings?
A: To replace the bearings, carefully remove the old ones using appropriate tools and press-fit the new bearings into place.
Q: Can I use different tyres with this product?
A: It is recommended to use the specified MT12 Wheels and Tyres for optimal performance and compatibility.
Q: How do I install the MT12 Body Set?
A: Follow the instructions provided in the manual to correctly install the MT12 Body Set onto the chassis of the product.
Safety Precautions
Please read all of the instructions and familiarize yourself with the product and its controls before operation.
- This product is not a toy. It is a high-performance model car therefore it is important to familiarize yourself with the model, its manual, and its construction before assembly or operation. Adult supervision is necessary for children operating this model.
- Always keep this instruction manual on hand during assembly and for operating reference.
- Do not use a power screwdriver to install screws into plastic parts. A power screwdriver’s high rotation speed can heat the screw being installed which can result in some melting of the plastic parts or stripped threads.
- For best performance, it is important to make sure all the moving parts can move freely without binding.
- This product, its parts, and its assembly tools can be harmful to your health. Always exercise extreme caution when assembling and operating this product. Keep away from any high-speed rotating parts during operation.
Tools Required For Assembly
Symbol Reference Key
Assembly Instruction
STEP 1: Chassis
STEP 2: Front/Rear Differential
STEP 3: Front Axle
STEP 4: Front Steering Set
STEP 5: Rear Hub Set
STEP 6: Shock Assembly
STEP 7: Front Adjustable Links
STEP 8: Front Suspension
STEP 9: Rear Adjustable Links
STEP 10: Rear Suspension
STEP 11: Center Gear
STEP 12: Center Drive Shaft
STEP 13: Center Gear Case
STEP 14: Motor
STEP 15: Battery Plate
STEP 16: Servo Set
STEP 17: Steering Turnbuckle
STEP 18: Front Body Posts
STEP 19: Tires & Wheels
STEP 20: Body
STEP 21: Body
Battery Charging and Installation
Battery Charging Steps and Safety:
- Remove the battery from the vehicle before charging.
- Place the battery on a fire-resistant surface.
- Avoid any contact with water or other liquids.
- Be sure to select the correct charging mode for the type of battery you are charging.
- ALWAYS use a compatible charger for sharpening your batteries.
- Caution: Never leave the battery unattended while charging. Always disconnect the charger from the power source when finished charging.
- Caution: Always disconnect the battery when you are finished driving the vehicle.
Battery Installation:
- Install the battery with the battery wires directed towards the speed control and strap until the battery is snug.
- Connect the power plug from the battery to the receiving plug of the speed control.
FIND IT ONASSOCIATEDELECTRICS.COM
Contact Information
- Associated Electrics, Inc. 21062 Bake Parkway Lake Forest, CA 92630 USA
- Call: 949-544-7500
- Fax: 949-544-7501
- Check out the following websites for all of our kits, current products, new releases, setup help, tips, and racing info!
- www.AssociatedElectrics.com.
FOLLOW US ON SOCIAL MEDIA
Documents / Resources
| TEAM
ASSOCIATED MT12 Monster
Truck
[pdf] User Guide
40007, 112159, 41105, 41106, 41104, 41100, 41101, 41102, 41103, MT12 Monster
Truck, MT12, Monster Truck, Truck
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>