Zmoon V317 Automobile Obd Diagnostic Instrument User Manual
- June 15, 2024
- Zmoon
Table of Contents
**Zmoon V317 Automobile Obd Diagnostic Instrument User Manual
**
Product introduction
This is a gasoline car code reader，which supports nine standard
protocols of OBD II/EOBD. Plug and play, can quickly read the car’s fault
information and vehicle parameters, is a more comprehensive function of
the fault diagnosis instrument. Please read the product manual carefully
before using this product, thank you.
Matters needing attention
- Do not use abrasive cleaners to clean this product.
- Do not let this product be heated or close to the source of the fire.
- Do not expose this product to direct sunlight for a long time.
- Do not try to disassemble this product to make any modifications, because it does not contain any maintenance components.
- Do not use this product in the room.
- If you do not plan to use this product for a long time, please store it in a dry environment to avoid extreme temperature and dust.
Product appearance and function key introduction
Tool description
- The OBD plug is connected to the OBD connector of the vehicle.
- 2.8 color display screen, resolution: 240*320
- Press the button to the right or page up
- Confirm ke.
- ESC to return.
- Press the button to the left or next page
- Green light: support the vehicle detection Yellow light: It is read that the vehicle is faulty Red light: The product is energized normally
Product parameters and accessories
Product parameters
- Working voltage: DC9～16V
- Working current: about 50mA
- Operating environment: -20～65℃
- Storage temperature: -30～80℃
- Dimensions: 1688925mm
- Eight languages: English, German, Italian, Dutch, French, Spanish, Chinese, Russian
Product accessories
Accessories Host 1 Manual 1
Support Agreement:
- SAE J1850 PWM (41.6Kbaud)
- SAE J1850 VPW (10.4Kbaud)
- ISO9141-2(5 baud init, 10.4Kbaud)
- ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
- ISO14230-4 KWP (fast init, 10.4 Kbaud)
- ISO15765-4 CAN (11bit ID, 500 Kbaud)
- ISO15765-4 CAN (29bit ID, 500 Kbaud)
- ISO15765-4 CAN (11bit ID, 250 Kbaud)
- ISO15765-4 CAN (29bit ID, 250 Kbaud)
Main functions
- Support nine standard protocols of OBD II/EOBD.
- Support car battery voltage test.
- Support gasoline model reading, clearing vehicle fault code, reading data stream, freezing frame information, checking MIL status, reading vehicle information, oxygen sensor test, fuel evaporation system (mode 8) test.
- Support fault code information query.
- Support data stream playback function, view/delete fault code, data stream, and freeze frame information.
- Support eight languages English, German, Italian, Dutch, French,
- Spanish, Chinese, Russian.
Product operation instructions
When you need to inspect a car, directly plug this product into the car’s OBD connector to start the inspection.
Page menu introduction
Car inspection menu
After connecting the vehicle, go to the home page, select the “OBD/EOBD”
menu, press the OK button to enter the test function page, this menu has 9
test functions, you can use the up/down function keys to turn pages.
Read data stream
After connecting to the vehicle, go to the homepage, select the “Date
Stream” menu, and press OK to enter the data stream view pag.
Data Stream
FUELSYS2 Vehicle InformaN CL
LOAD_PCT(%) 59.6
ETC(℃) 40
SHRTFT1(%) 1.6
LONGFT1(%)
-46.4
SHRTFT2(%)-43.0
Fault code query
After connecting the vehicle, go to the home page, select the “DTC Lib”
menu, press the OK button to enter the fault code query page, support the
query of the vehicle fault code, and explain the reason.
DTC Lookup
P2100 The 1st range:P,C,B,U The 2nd range:0,1,2,3 Others from 0 to F
I/M ready state
After connecting the vehicle, enter the home page, select the “I/M” menu,
and press the OK button to enter the setting page. This menu has 2 functions,
and you can use the up/down function keys to turn pages.
I/M Readiness
Since DTCs Cleared
This Drive Cycle
Voltage test
After connecting the vehicle, go to the home page, select the “Voltage”
menu, press the OK button to enter the voltage test page, and check the
voltage value.
Voltage
12.1V
Product settings
After connecting the vehicle, go to the home page, select the “Setup” menu,
and press the OK button to enter the setting page. This menu has 2 setting
functions, and you can use the up/down function keys to turn pages.
System Setup
Language
Unit Of Measure
Language
Deutsch
Dutch
English
Español
Français
Italiano
Matters needing attention
The product is not compatible with new energy vehicles, hybrid vehicles, and models that do not comply with the OBD2 protocol.
Disclaimer
We are committed to providing customers with unparalleled customer support
before and after sales. The following provides our products with our exemption
conditions:
If any of the following conditions are met, the customer shall not enjoy the
policies within the scope of this limited warranty:
a) Abnormal use of the product, abnormal conditions, improper storage,
exposure to moisture or humidity, unauthorized modification, unauthorized
maintenance, misuse, negligence, abuse, accident, alteration, improper
installation or other actions that are not malfunctions, Including damage
caused by transportation.
b) The product is damaged due to external reasons (such as collision with
objects) or fire, flood, sand, dust, storm, lightning, earthquake or weather
conditions, irresistible acts of natural disasters or battery leakage, theft
and damage, blown fuse, Our company is not responsible for any product damage
caused by incorrect use of any power supply.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>