Chauvet Professional Amhaze ECO Machine User Manual
- June 7, 2024
- Chauvet Professional
Table of Contents
Model ID: AMHAZEECO
220AMHAZEECO
Edition Notes
The AmHaze ECO User Manual includes a description, safety precautions,
installation, programming, operation and maintenance instructions for the
AmHaze ECO as of the release date of this edition.
Trademarks
CHAUVET, the Chauvet logo and AmHaze ECO are registered trademarks or
trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the
United States and other countries. Other company and product names and logos
referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited
to, all design, text and images are owned by Chauvet. 0 Copyright 2021 Chauvet
& Sons, LLC. All rights reserved. Electronically published by Chauvet in the
United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for
professional information purposes only. Chauvet expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its
content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11
in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to
scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as
this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in
all respects. However, Chauvet assumes no responsibility and specifically
disclaims any and all liability to any party for any loss, damage or
disruption caused by any errors or omissions in this document, whether such
errors or omissions result from negligence, accident or any other cause.
Chauvet reserves the right to revise the content of this document without any
obligation to notify any person or company of such revision, however, Chauvet
has no obligation to make, and does not commit to making, any such revisions.
Download the latest version from
www.chauvetprofessional.com.
Document Revision
This AmHaze ECO User Manual is the 1st edition of this document. Go to
www.chauvetprofessional.com for the
latest version.
1. Before You Begin
What Is Included
• AmHaze ECO
• Quick Reference Guide
• Seetronic Powerkon IP65 power cord
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition. If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Convention
|
Meaning
---|---
1-512| A range of values
50/60| A set of values of which only one can be chosen
Settings| A menu option not to be modified
Symbols
Symbol
|
Meaning
---|---
| Critical installation, configuration, or operation information. Not
following these instructions may make the product not work, cause damage to
the product, or cause harm to the operator.
| Important installation or configuration information. The product may not
function correctly if this information is not used.
| Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.
Safety Notes
Read all the following safety notes before working with this product. These
notes contain important information about the installation, usage, and
maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing In
this User I Manual will only apply to properly trained, certified technicians.
Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of
this product.
Personal Safety
- Always disconnect the product from the power source before cleaning.
- Always connect the product to a grounded circuit to avoid the risk of electrocution.
- Do not touch the product’s housing when operating because it may be very hot.
- Do not drink the fluid.
- Do not allow the fluid to touch your skin or eyes.
- Do not use for space heating purposes.
- Do not touch the output nozzle on this product. It is very hot during operation and it may remain hot for several hours after turning the product off.
Mounting and Rigging
- This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to rain or moisture. (IP20)
- CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm, humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
- Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- Make sure there are no flammable materials close to the product when operating.
- When hanging this product, always secure to a fastening device using a safety cable.
- Only use the handles to carry this product.
Power and Wiring
- Make sure the power cord is not crimped or damaged.
- Always make sure you are connecting this product to the proper voltage in accordance with the specifications in this manual or on the product’s specification label.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- Never connect this product to a dimmer pack or rheostat.
- Never disconnect this product by pulling or tugging on the power cable.
Operation
- Drain the tank before transporting the product.
- Only use Chauvet (PHF) haze fluid or Grignard Pure.
- Do not add anything to the fluid.
- Do not operate this product if there is damage on the housing, hose, or cables. Have the damaged parts replaced by an authorized technician at once.
- Do not cover the ventilation slots when operating to avoid internal overheating.
- The maximum ambient temperature is 113 T (45 °C). Do not operate the product at higher temperatures.
- The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
- The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
- In the event of a serious operation problem, stop using this product immediately!
If your Chauvet product requires service, contact Chauvet Technical Support.
2. Introduction
Description
The AmHaze ECO is a professional water-based haze machine that delivers high output while utilizing economic fluid consumption. With a 30-second heat-up time and continuous output that doesn’t require reheating, a single fluid container at the maximum output of 120 cfm will last over 8 hours. Easily control the output and fan speed via DMX or on the onboard control knobs. The AmHaze ECO comes ready to rest on the floor and is also equipped with M12 threaded inserts for truss clamps, an easy way to mount the 251b machine. The AmHaze ECO combines high output with efficient operation for a complete atmosphere solution for medium to large venues.
Features
- Professional water-based haze machine
- 30-sec heat up time nearly eliminates wait time for operation
- Continuous output with no reheating required
- Tour-ready with a rugged road case and M12 threaded insert for truss clamps
- Efficient fluid consumption lasts more than 8 hours on a single fluid container
- Achieve continuous variable haze output and blower speed, adjusted via DMX or manual knobs
Product Overview
Product Dimension
3. Setup
AC Power
The AmHaze ECO has a fixed power supply that works with an input voltage of
either 120 VAC, 60 Hz or 230 VAC, 50 Hz, depending on the specific model. To
determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s
back panel, or refer to the product’s specifications chart. The listed current
rating indicates the product’s average current draw under normal conditions.
• Always connect the product to a protected circuit (a circuit breaker or
fuse). Make sure the product has an appropriate electrical ground to avoid the
risk of electrocution or fire.
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via a breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The AmHaze ECO comes with a power input cord terminated with a Seetronic Powerkon A connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with your product has no plug, or if you need to change the plug, use the table below to wire the new plug.
Connection | Wire (U.S.) | Wire (Europe) | Screw Color |
---|---|---|---|
AC Live | Black | Brown | Yellow or Brass |
AC Neutral | White | Blue | Silver |
AC Ground | Green/Yellow | Green/Yellow | Green |
Resetting the Breaker
This product is equipped with a resettable circuit breaker. If the breaker trips, all sections of this product will lose power.
- Remove the power cord from mains power.
- Allow unit to cool for 15 minutes.
- After 15 minutes, you may attempt to reset the breaker by pressing the button with your finger.
- Plug the product’s power cord into the power outlet and continue using as recommended.
DMX Linking
You can link the AmHaze ECO to a DMX controller using a 3- or 5-pin DMX
connection. If using other DMX-compatible products with this product, you can
control each individually with a single DMX controller.
DMX Personalities
The AmHaze ECO uses a 3- or 5-pin DMX data connection for the 3-channel DMX
personality.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a
DMX controller, download the DMX Primer from the Chauvet website:
www.chauvetprofessional.com.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled
devices to communicate bi-directionally along existing DMX cabling. Check the
DMX controller’s User Manual or with the manufacturer as not all DMX
controllers have this capability. The AmHaze ECO supports RDM protocol that
allows feedback to make changes to menu map options.
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes. For our CHAUVET Professional line of mounting
clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate
room for ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this
product.
• Before deciding on a location for the product, make sure there is easy
access to the product for maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can
support the product’s weight. See the Technical Specifications for weight
information.
• When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate
weight capacity.
Procedure
The AmHaze ECO comes with a bracket to which you can attach a mounting clamp
directly. Mounting clamps are sold separately. Make sure the clamps are
capable of supporting the weight of this product. Use at least two mounting
points per product. For the CHAUVET Professional line of mounting clamps, go
to http://www.trusst.com/products.
Mounting Diagram
4. Operation
Control Panel Description
Button
|
Function
---|---