Team Associated 72098 Suspension Wheelie Bar Conversion Instruction Manual
- June 10, 2024
- TEAM ASSOCIATED
Table of Contents
Team Associated 72098 Suspension Wheelie Bar Conversion Instruction Manual
Shock Bleeding Steps:
- Pull shock shaft down.
- Fill shock body 3/4 full with silicone fluid.
- Slowly move the shock shaft up and down to remove air from under piston.
- Wait for bubbles to come to surface.
- Fill shock body to top with silicone fluid.
- Place a drop of oil in the cap and on cap threads.
- Install cap and tighten completely.
- Slowly compress shaft all the way to the top. If there is pressure at the top of the stroke, there is too much oil or air. You must bleed it out.
- Slowly pull shaft out.
- Unscrew the cap 3/4 turn and tilt the shock at a slight angle.
- Slowly compress the shaft to push out excess oil and air. You should see bubbles coming out from under the cap.
- With the shaft compressed, tighten the cap and re-check for pressure at the top of the stroke. If there is still pressure, repeat steps 9 thru11.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>