LOGOSOL AB Heart Bench Instruction Manual
- June 1, 2024
- LOGOSOL
Table of Contents
LOGOSOL AB Heart Bench
Product Information
Specifications:
- Material: Wood
- Dimensions: Hearts – 28 x 145 x 450 mm, Legs – 45 x 70 x 380 mm, Joists – 20 x 40 x 1500 mm
Product Usage Instructions
Cutting List:
- 6 pcs 28 x 145 x 450 mm (Hearts)
- 4 pcs 45 x 70 x 380 mm (Legs)
- 31 pcs 20 x 40 x 1500 mm (Joists)
Build Description:
All measurements are approximate and can be adjusted according to needs.
- Glue together three planks with dimensions 28x145x450 mm. Make three sets of these end pieces.
- Draw a heart shape on one of the glued-together end pieces. Tip! Make the heart a little flat on top.
- Cut out the shape with a band saw or jigsaw. Use it as a template for the other two ends and cut these out as well.
- Make four legs with the dimensions 45x70x380 mm. Cut the ends at a 45-degree angle.
- Screw or nail the legs to two of the ends.
- Nail the hearts to the joist. Start with the one in the middle at the top.
- Continue with the rest of the joists. By the legs you might need extra pieces to fasten the joists.
- Good work! Now the heart bench is ready.
FAQ
- Q: Can I use different types of wood for this project?
- A: Yes, you can use different types of wood as long as they are suitable for outdoor furniture.
- Q: Do I need to apply a protective finish to the bench?
- A: It is recommended to apply a weather-resistant finish to protect the wood from the elements.
BUILD A BEAUTIFUL HEART BENCH
A fun and simple construction project that results in a comfortable heart- shaped bench.
Cutting list:
- 6 pcs 28 x 145 x 450 mm (Hearts)
- 4 pcs 45 x 70 x 380 mm (Legs)
- 31 pcs 20 x 40 x 1500 mm (Joists)
Build description
All measurements are approximate and can be adjusted according to needs.
- Glue together three planks with dimensions 28x145x450 mm. Make three sets of these end pieces.
- Draw a heart shape on one of the glued-together end pieces.
- Tip! Make the heart a little flat on top.
- Cut out the shape with a band saw or jigsaw. Use it as a template for the other two ends and cut these out as well.
- Make four legs with the dimensions 45x70x380 mm. Cut the ends at a 45 degree angle.
- Screw or nail the legs to two of the ends.
- Nail the hearts to the joist. Start with the one in the middle at the top.
- Continue with the rest of the joists. By the legs, you might need extra pieces to fasten the joists.
- Good work! Now the heart bench is ready.
LOGOSOL AB
- + 46 611-182 85
- info@logosol.com
- logosol.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>