VOLLRATH R3873446 Cafeteria Breath Guard Instruction Manual

VOLLRATH R3873446 Cafeteria Breath Guard

Specifications

• Product Name: Cafeteria Breath Guard
• Models: One Piece and Three Piece
• Manufacturer: Vollrath Company, L.L.C.
• Item No.: 2350030-01

Product Usage Instructions

One Piece Breath Guard Installation:

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C).
2. Repeat the installation for all four uprights.

Three-Piece Breath Guard Installation:

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C).
2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C).
3. Install the one piece breath guard (E) securing with screws (F) and cap nuts (C).
4. Install the side breath protector (G) to the support tube (D) securing with cap nuts (C).
5. Install the support bar and stud assembly (H) to the side breath guards (E).
6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C).

FAQ

• Q: Can I use the Cafeteria Breath Guard for outdoor events?
  • A: The Cafeteria Breath Guard is designed for indoor use only and may not withstand outdoor conditions.
• Q: How do I clean the breath guard?
  • A: To clean the breath guard, use a mild detergent solution and a soft cloth. Avoid using abrasive cleaners to prevent damage to the surface.

These instructions cover the installation of the one pice Cafeteria Breath Guard and the three piece Cafeteria Breath Guard.

One Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NOTE:

Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
3. Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
4. Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.

Three-Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NOTE:

Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
4. Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

Contact

• www.vollrathco.com

The Vollrath Company, L.L.C.

• 1236 North 18th Street
• Sheboygan, WI 53081-3201
• U.S.A.
• Main Tel: 800.628.0830
• Service Tel: 800.628.0832
• FAX: 800.752.5620
• Vollrath of Canada, Co.
• Tel: 800.695.8560
• FAX: 800.752.5620

© 2010 The Vollrath Company, L.L.C.

References

• Commercial Foodservice & Kitchen Equipment | Vollrath Foodservice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>