KLARSTEIN 10012129 Fireplace Heater User Manual
- June 6, 2024
- Klarstein
Table of Contents
GRENOBLE
Elektrischer Kamin
Fireplace Heater
www.klarstein.com
Hinweis: Dieses Produkt ist nur für gut isolierte Räume oder für den
gelegentlichen Gebrauch geeignet.
Note: This product is only suitable for well-insulated spaces or
occasional use.
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damages. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number | 10012129 |
---|---|
Power supply | 220-240 V — 50 Hz |
Power consumption | 1850 W |
PRODUCT DATA SHEET
Model identifier(s): | 10012129 |
---|---|
Item | Symbol |
Heat output |
only
Nominal heat output| Pnom| 1.85| kW| | manual heat charge control, with
integrated thermostat| N/A
Minimum heat output (indicative)| Pmin| 0.95| kW| | manual heat charge control
with room and/or outdoor temperature feedback| N/A
Maximum continuous heat output| Pmax,c| 1.85| kW| | electronic heat charge
control with room and/or outdoor temperature feedback| N/A
Auxiliary electricity consumption| | fon assisted heat output| N/A
At nominal heat output (fan motor)| elmax| 0,0| kW| | Type of heat output/room
temperature control (select one)
At minimum heat output (fon motor)| elmin| 0,0| kW| | single stage heat output
and no room temperature control| no
In standby mode| eISB| 0,0| W| | Two or more manual stages, no room
temperature control| no
| | with mechanic thermostat room temperature control| yes
| with electronic room temperature control| no
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| no
| Other control options (multiple selections possible
| room temperature control, with presence detection| no
| room temperature control, with open window detection| no
| with distance control option| no
| with adaptive start control| no
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chal-Tec GmbH, WallstraBe 16, 10 79, Berlin, Germany|
SAFETY INSTRUCTIONS
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Children of less than 3 years should be kept away unless continuously supervised.
- Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
CAUTION
Risk of burns! Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are
present.
- If the appliance or the supply cord is damaged, it must be repaired by the manufacturer, its service agent, or qualifi ed person.
- This heater must be used on an AC supply only and the voltage marked on the heater must correspond to the supply voltage.
- Do not switch the appliance on until it is properly installed as described in this manual.
- The heater must not be located immediately below a socket outlet.
- The heater must not be located in front of a socket outlet.
- Keep furniture, curtains and other flammable material at least 1 meter away from the appliance. Never close to curtains and other combustible material, otherwise may cause risk
- Do not leave the appliance unattended during use.
- Do not leave the appliance unattended whilst connected to the main supply.
- This appliance is intended for household use and should not be used for industrial purposes.
- From time to time, check the cord for damage. Never use the appliance if the cord or any part of the appliance shows signs of damage.
- Do not operate this appliance with a damaged plug or cord, after a malfunction or after being dropped or damaged in any way.
- Repairs to electrical appliances should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Do not run the mains cable under carpets, rugs, etc.
- Do not allow the main cable to hang over sharp edges or come into contact with hot surfaces.
- In order to avoid overheating, do not cover or obstruct the heater in any way.
- Overheating will result if it is accidentally covered.
- Never immerse the product in water or any other liquids.
- Do not use this heater in the immediate surroundings of a bath, a shower, or a swimming pool.
- Do not use the appliance outdoors.
- Do not use if you have wet hands.
- Never use the appliance on or near hot surfaces.
- Before cleaning the appliance, ensure it is unplugged from the power and that it is completely cooled.
- Do not clean the appliance with abrasive chemicals.
- Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to the user or damage to the appliance.
- Do not lift the appliance by the front panel.
- In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Note: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
PRODUCT DESCRIPTION
- Knobs
- Glowing effect/glass panel
- Hot air vent
OPERATION AND KNOBS
Plugin the appliance into the socket.
Knob 1 – The function control
- 1st switching position: control the flame simulation
- 2nd switching position: control heating fan, for vent air.
- 3rd switching position: Low heating
- 4th switching position: High heating
- 5th switching position: Power on/off
Knob 2 – Temperature adjustment
- Firstly rotate the temperature control knob clockwise to the maximum value. Leave the switch in this position until the air in the room has reached the desired temperature and the thermostat switches itself off.
- Consequently, the thermostat will switch the electrical heating on and off in order to maintain the pre-programmed temperature. This way you will save energy at the same time.
Knob 3 – Flame effect
Adjust light of fire by rotating the fire adjustable switch clockwise until
desired intensity.
Safety Cut-Off
This appliance is fitted with a safety cut-off which will operate if the fire
overheats (e.g. due to blocked air vents). For safety reasons, the fire will
NOT automatically reset. To reset the appliance, disconnect the appliance from
the mains supply for at least 15 minutes. Reconnect to the main supply and
switch on the appliance.
CARE AND CLEANING
Before cleaning the appliance, disconnect if from the socket and leave to cool off. You can clean the exterior of the heater with a soft, damp cloth. Do not use cleaning or polishing products.
Changing the bulbs
- Loosen both screws at the front panel (1) of the coal simulating element (2). Pull the element towards you and take all parts out of the heater.
- Replace the two lamps with identical G9 lamps with a capacity of max. 25W per lamp.
TROUBLESHOOTING
Problem | Possible cause and suggested solution |
---|---|
No operation/ no fan. | Check fuse by replacement. |
Check for safety cut-off operation.
No fire effect light.| Check the bulb by replacement
HINTS ON DISPOSAL
According to the European waste regulation, 2012/19/EU this symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council or your household waste disposal service.
MANUFACTURER & IMPORTER (UK)
Manufacturer: Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>