Wunderlich 25804-001 Handlebar Riser Installation Guide
- June 1, 2024
- Wunderlich
Table of Contents
Wunderlich 25804-001 Handlebar Riser
Handlebar riser
Specifications
- Product Name: Handlebar Riser
- Art.-Nr: 25804-001
- Dimensions: 100mm x 125mm
- Material: Steel
- Colour: Black
- Manufacturer: Not specified
Component
The colours are for illustrating purposes only.
Installation Steps
- Ensure the handlebar riser kit is complete with all components.
- Clean the handlebar area where the riser will be installed using the provided cleaner.
- Apply fitting lubricant to the mounting surfaces of the handlebar and the riser.
- Align the riser with the handlebar and insert the screws. Use the provided vis and tighten to 19Nm torque using a torque wrench.
- Apply thread-locking fluid to secure the screws in place.
- Tighten the screws one after the other as shown.
- All lines must be checked for free movement!
Maintenance
Regularly check the tightness of the screws to ensure the handlebar riser is securely attached. Reapply thread-locking fluid if necessary.
Safety Precautions
- Always follow the recommended torque values for tightening the screws to avoid damage.
- Do not exceed the maximum torque specified for the screws during installation.
- Inspect the handlebar riser periodically for any signs of wear or damage.
Cleaning and Care
Use a damp cloth to clean the handlebar riser. Avoid using harsh chemicals that may damage the finish.
Storage
Store the handlebar riser in a dry and cool place away from direct sunlight to prevent corrosion.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>