Wunderlich 21170-702 Navigation Bracket Instruction Manual
- June 12, 2024
- Wunderlich
Table of Contents
Wunderlich 21170-702 Navigation Bracket
Product Information
The product is a navigation bracket (Navihalter) designed for use with an original navigation system. It includes various components such as screws, washers, cap nuts, and a threaded washer. The product is compatible with BMW motorcycles.
Product Usage Instructions
- Before installation, it is recommended to remove the windshield for easier installation.
- Determine the position where the navigation bracket will be installed to avoid contact with the windshield.
- Ensure that all the required components are included in the package.
- Using the provided screws, attach the U-washer (M6) to the navigation bracket.
- Attach the cap nuts (M6) to secure the U-washer in place.
- Attach the second set of U-washers (M6) to the navigation bracket using the lens head screws (M6x14mm).
- Secure the threaded washer in place using the cap nut (M5).
- If necessary, connect the original navigation system using the original Navi connector.
- Ensure that all screws are tightened with a torque of 2Nm.
- After installation, clean the product using a suitable cleaner.
Please refer to the product manual for further details and safety instructions.
Navigation bracket
- Art. Nr: 21170-702
- Art. Nr: 21170-712
Key/file
- Fitting tip
- Schraube Screw ****
- Magnification
- Torque
- Attention
- Thread locking fluid
- Fitting lubricant
- Cleaner
| description| The colors are for illustrating purposes
only.
| DIN| ISO|
Quantity
---|---|---|---|---|---
1| navigation bracket| | | 1
2| adhesive base plate| | | 1
3| U- washer| M6| 125SA2| 7089| 3
4| cap nut| M6| 917SA2| | 3
5| washer| M6| 9021SA2| 7093| 2
6| lens head screw M6x14mm| 7381SA2| 7381SA2| 2
7| wing screw __ M5| | | 1
8| sleeve 31mm| | | 1
9| sleeve 59mm| | | 1
10| threaded washer| | | 1
11| cap nut| M5| 917SA2| | 1
We recommend for easier installation to remove the windshield. Beforehand, the position of the Navigation bracket should be determined to prevent contact with the windshield
INSTRUCTIONS
