Wunderlich 26840-XXX Engine Protection Instruction Manual
- June 12, 2024
- Wunderlich
Table of Contents
Wunderlich 26840-XXX Engine Protection
Product Information
- Product Name: Motorschutz
- Product Number: Art.-Nr.: 26840-XXX
- Description: Engine protection
Product Usage Instructions
- Fitting Tip: Ensure proper fitting of the engine protection.
- Attention: Use caution during installation.
- Fitting Lubricant: Apply fitting lubricant for smoother installation.
- Screw: Use the provided screw for installation.
- Thread Locking Fluid: Apply thread locking fluid to secure the screw.
- Torque: Tighten the screw with the specified torque of 8 Nm using a torque wrench.
- Front Bracket: Install the front bracket using the provided components.
- Sheet Metal Nut: Secure the sheet metal nut using an appropriate tool.
- Hexagon Head Screw: Use the hexagon head screw for installation.
- Rear Bracket: Install the rear bracket using the provided components.
- Silentblock: Install the silent block using the provided components.
- Rubber Grommets: Check the rubber grommets regularly for any damage or wear. If damaged, contact our customer service to obtain spare grommets.
If the sheet metal nuts cannot be slid on easily, carefully widen them with a screwdriver.
Parts List
| The colors are for illustrating purposes only.| DIN| ISO|
Menge Quantity
---|---|---|---|---
1| cylinder head screw M6x16 8 Nm| 6912Z| 4762| 2
2| front bracket| | | 1
3| sheet metal nut M6| | | 4
4| hexagon head screw M6x16 8 Nm| 933| 4017| 2
5| rear bracket| | | 1
6| silent block| | | 4
7| ngine protection| | | 1
8| washer black M6| 9021SA2| 7093| 4
9| lens head screw black M6x10 6 Nm| 7381SA2| 7381SA2| 4
If the sheet metal nuts cannot be pushed on, carefully widen them with a screwdriver.
Assembly
The fitted rubber grommets are exposed to strong loads and should be fitted
free of tension. Please check the rubber grommets regularly for intactness. If
the rubber grommets are damaged please get in contact with our customer
service here at Wunder-lich to get some spare grommets.
Check
bolts regularly for tightness and retighten if necessary!