Carrier SYSTXCCITC01-C Residential Communicating Systems Owner’s Manual

Carrier SYSTXCCITC01-C Residential Communicating Systems

Product Information

Specifications:

• Number: TIC2024-0012
• Title: Software 1.50 Release (- C Wall Control)
• Product Category: Residential Communicating Systems
• Date: 4/16/2024

Product Usage Instructions

Update Process:

A new software version 1.50 will be pushed OTA staggered starting the week of April 22, 2024. Ensure your system is connected to the internet to receive the update.

Installation and Setup:

Only trained and qualified personnel should design, install, repair, and service HVAC systems and equipment. Follow all national standards and safety codes during the process. The responsibility lies with the Dealer to ensure local codes, standards, and ordinances are met.

System Control:

Sync the system control to the accompanying mobile app by following the schedule fix instructions provided in the update.

Maintenance Reminders:

Update the dealer name on maintenance reminders to prevent overlapping text issues. Refer to the update details for specific instructions on this fix.

FAQ

Q: When will the software update be available for my Carrier SYSTXCCITC01-C?

A: The software update will be pushed OTA staggered starting the week of April 22, 2024. Ensure your system is connected to the internet to receive the update.

Q: Can I install the update myself?

A: It is recommended that only trained and qualified personnel handle the design, installation, repair, and servicing of HVAC systems and equipment to ensure compliance with safety standards and codes.

TECHNICAL INFORMATION COMMUNICATION

Quality and Continuous Improvement

Number: TIC2024-0012
Title: Software 1.50 Release (- C Wall Control)
Product Category: Residential Communicating Systems
Date: 4/16/2024

Products Affected
Residential Communicating Systems –C touch controls only

Carrier SYSTXCCITC01-C
Bryant SYSTXBBECC01-C

Situation
A new software version 1.50 will be pushed OTA staggered starting the week of April 22, 2024.

Update

• Modulation limit screen reinstated for legacy gas furnaces
• Quiet mode for outdoor units defaulted to off
• Heat source lockout screen corrected
• Time synchronized between app and control
• Dissipation event improvements
• Support of French language in equipment checkout screens
• Geothermal RPM Max screen corrected
• File structure for USB updates made like –B SD Car

Revision History:
Version 1.43 (November 2023)

• Integrate new communicating gas furnace models.
• Allow OTA to new communicating furnaces.
• Integrate new communicating fan coil.
• Set the time zone from Wi-Fi setup screens.
• End User License Agreement (EULA) update.
• Additional N coils models added to setup menu.
• System monitor correction for Celsius.
• OAT (outdoor air temperature) fix for negative temperatures.
• Schedule fix to sync system control to APP
• Dealer name change on maintenance reminder to fix overlapping text
• Improved diagnostic codes for communicating outdoor units

Version 1.24 (January 2023) Released to Bryant control only.

Fixed issue with Bryant units displaying incorrect logo on the service cap and background on boot up screen. No operational issues with 1.22 version software.

Version 1.22 (Dec 2022)

Major updates:

• Added French Language Support
• Enable/disable System Monitor (defaulted off)
• MQTT rate limiting – app active mode
• Implement proximity sensor functionality
• Added a reminder alerting homeowners to download and use the new mobile app

Minor update
Added undercarriage lights functionality with night light feature (defaulted off)

Version 1.11 (July 2022)
Major updates:

• Equipment firmware OTA capability.
• System monitor implemented to prevent over conditioning including a high and low temperature alert.

Minor updates:

• WPA3 security compatibility for Wi-Fi connection.
• Functionality added for selection of new evaporator V Coil in the discovery screens.
• Variable speed ODU Cooling airflow limits corrected.
• New “Over The Air” (OTA) Status Indicator on the idle screen to indicate new firmware is being downloaded.
• Temperature compensation algorithm improved for better temperature accuracy.
• Time synchronization corrected so it synchronizes immediately when enabled.
• Equipment summary updated to reflect correct ODU size with NIM application.
• SAM Module compatibility added.
• Wi-Fi advanced options are now available.
• “All zones hold” no longer results in a quick timeout on the main screen.

Version 1.05 PRODUCTION (February 2022)
Initial release
Only trained and qualified personnel should design, install, repair and service HVAC systems and equipment. All national standards and safety codes must be followed when designing, installing, repairing and servicing HVAC systems and equipment. It is the responsibility of the Dealer to ensure local codes, standards, and ordinances are met.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>