dji Avata 2 Fly More Combo Single Battery Drone User Guide
- June 1, 2024
- DJi
Table of Contents
dji Avata 2 Fly More Combo Single Battery Drone
Product Information
Specifications
- Model: DJI Intelligent Flight Battery
- Version: 1.0
- Charging: 30W USB PD
- Compatibility: Works with DJI Fly App
Product Usage Instructions
Charge to Activate the Battery
To activate the Intelligent Flight Battery before first use, follow these
steps:
- Use a 30W USB PD charger to charge the battery.
- Ensure the battery is fully charged before initial use.
Checking Battery Level and Power On/Off
To check battery level and power on/off the device:
- Press the button once to check the battery level.
- To power on/off, press the button, then press and hold it.
Linking and Activation
To link and activate the devices for use with the aircraft:
- Ensure all devices are updated to the latest firmware version via DJI ASSISTANTTM 2 software.
- Connect the goggles to a mobile device, run DJI Fly App, select Connection Guide, and follow on-screen instructions.
FAQ
-
How do I activate the Intelligent Flight Battery?
To activate the Intelligent Flight Battery, use a 30W USB PD charger to fully charge the battery before first use. -
What should I do if the linking process fails?
If the linking process fails, press the power button on the devices to stop the process. Then restart and try linking again.
Quick Start Guide
Charge to activate the Intelligent Flight Battery before using for the first time.
https://www.dji.com/avata-2/downloads
WE ARE HERE FOR YOU
SUBSCRIBE FOR MORE INFO
- This content is subject to change without prior notice.
- DJI and DJI AVATA are trademarks of DJI. Copyright © 2024 DJ| All Rights Reserved.
- Check battery level : press once.
- Power on/off: press, then press and hold.
Linking and Activation
- Make sure that the devices used with the aircraft have been updated to the latest firmware version via the DJI ASSISTANTTM 2 (Consumer Drone Series) software ( https://www.dji.com/avata-2/downloads ) before linking and powering on all the devices.
- Press the power button on the devices to stop the process if the linking fails. Connect the goggles to a mobile device, run the DJI Fly app, select Connection Guide, and then follow the on-screen instructions to link
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>