ecler eMSP50Ti Specialized Loudspeakers User Manual
- June 12, 2024
- ecler
Table of Contents
eMSP50Ti
SPECIALIZED LOUDSPEAKERS
Public Address Loudspeaker
USER MANUAL
IMPORTANT REMARK
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING: SHOCK HAZARD – DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
** The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: To prevent fire or shock hazard, do not expose this equipment to
rain or moisture.
WARNING:** An apparatus with Class I construction shall be connected to a
mains socket-outlet with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Unplug the apparatus during lightening sorts or when unused for long periods of time.
-
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Disconnecting from mains: Switching off the POWER switch all the functions and light indicators of the amplifier will be stopped, but fully disconnecting the device from mains is done unplugging the power cord from the mains input
socket. For this reason, it always shall remain readily operable. -
Equipment is connected to a socket-outlet with earthing connection by means of a power cord.
-
The marking information is located at the bottom of apparatus.
-
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
WARNING: This product must not be discarded, under any circumstance, as
unsorted urban waste. Take to the nearest electrical and electronic waste
treatment centre.
NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may
be caused to people, animal or objects due to failure to comply with the
warnings above.
IMPORTANT NOTE
Thank you for choosing our Ecler eMSP50Ti musical horn!
It is VERY IMPORTANT to carefully read this manual and to fully understand its
contents before any connection in order to maximize your use and get the best
performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its
maintenance be carried out by our authorised Technical Services.
Ecler eMSP50Ti comes with a 3-year warranty.
INTRODUCTION
eMSP50T0Ti is a 2-way 50W horn loudspeaker, carefully selected for the most widespread 70/100V applications: paging and background Music. They offer durability and an optimal voice and music reproduction. Made of reinforced ABS and IP66 certified, ideal for high performance outdoors.
MAIN SPECIFICATIONS
- Water-resistant ABS 2-way 50W horn loudspeaker
- 50 W RMS @ 8 Ω
- Power selector:
- 100V: 50W / 25W / 12,5W / 9W / 4,5W / 3,5W / 8 Ω
- 70V: 25W / 12,5W / 9W / 4,5W / 3,5W / 1,75W / 8 Ω
- IP66 certification
- Connection via terminal block
CONNECTING
eMSP50Ti operates into high or low impedance. For this reason, it incorporates a terminal block located on the rear panel.
| TAP | @100V | @70V |
|---|---|---|
| 2-Jan | 50W | 25W |
| 3-Feb | 25W | 12,5W |
| 4-Mar | 12,5W | 9W |
| 3-Jan | 9W | 4,5W |
| 4-Feb | 4,5W | 3,5W |
| 4-Jan | 3,5W | 1,75W |
| 5-Jan | 8 ohm / 50W | 8 ohm / 50W |
Note: If the loudspeaker is used in 70V installations, the corresponding
powers for the 100V position will be reduced to half those indicated on the
switch. To one quarter for 50V installations.
The low-impedance connection will allow the loudspeakers to be configured for
operating under these conditions with a maximum power of 250 W. If this setup
is adopted, consideration must be given to amplifier limits when several
loudspeakers are connected to its output, especially if the overall impedance
is below 4Ω .
Furthermore, it is important that the cable connecting the amplifier outputs
to the loudspeakers is of good quality and as short as possible; this is of
special significance when long distances have to be covered and loudspeaker
impedance is low.
Note: The loudspeaker distribution along a 70/100V line historically
arises from the technical requirement to mix loudspeakers of different
impedances and/or powers on the same amplification line or channel, but
without any need to worry about the total impedance of the full assembly.
Moreover, this solution enables long cable runs with
significantly smaller sections that those usually employed in low-impedance
installations, but with minimum power losses.
WARNING! If the system is accidentally connected with the switch in the
100 V/60 W position to a low-impedance amplifier, no damage will be caused to
the loudspeaker, but its performance will be well below its specifications. If
the loudspeaker is accidentally connected to a 70/100 V line, in the 8 Ω, it
will be seriously damaged.
LOCATION AND INSTALLATION
In general, the following rules will be followed:
- The unit must always be installed on firm, solid surfaces.
- Ensure that the surface on which the loudspeaker is to be installed can withstand its weight.
- Always use a safety cable to secure the loudspeaker installation.
- For good sound reproduction, there must not be any obstacles between the loudspeaker and the audience.
High frequencies, unlike bass frequencies, are extremely directional and any obstacle will involve attenuation in their response.
TECHNICAL SPECIFICATIONS
eMSP50Ti
| Drivers | 6” woofer & 1” dome tweeter |
|---|---|
| Nominal Impedance | 8Ω |
| Power Handling | 50WRMS / 200W Peak |
| Power options @ 100V | 50W / 25W / 12,5W / 9W / 4,5W / 2,6W & 8Ω |
| Power options @ 70V | 25W / 12,5W / 9W / 4,5W / 2,6W / 1,3W & 8Ω |
| Frequency response (-10dB) | 153 Hz-20 kHz |
| Coverage angle | 66°x103° (HxV) |
| Sensitivity 1W/1m | 95 dB |
| Maximum SPL | 112dB continuous / 118dB peak |
| IP rating | IP66 (IEC60529 Certified) |
| Finished color | Papyrus white (RAL 9018) |
| Material | ABS |
| Operating and storage conditions | Min -20ºC (-4ºF); Max +60ºC (+140ºF) |
| Dimensions (WxHxD) | 359 x 250 x 295mm / 14.13 x 9.84 x 11.61 in. |
| Weight | 3,9 kg. / 8.6 lb. |
PACKING LIST
- eMSP50Ti
- User’s quick guide
- Warranty card
All product characteristics are subject to variation due to production
tolerances.
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements
in the design or manufacturing that may affect these product specifications
For technical queries contact your supplier, distributor or complete the
contact form on our website, in Support / Technical requests.
Motors, 166‐168 08038 Barcelona ‐ Spain
(+34) 932238403
information@ecler.com
www.ecler.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>