nedis WIFIDS20WT Smoke Alarm User Guide

nedis WIFIDS20WT Smoke Alarm

Specifications

• Low-battery alert
• Operating temperature
• Operating humidity
• Wireless connections
• Wi-Fi frequency range

Product Information

Smoke Alarm – WIFIDS20WT / WIFIDS20WT3

Main Parts

1. Alarm
2. Test/Silence button
3. Indicator*
4. Battery compartment
5. Mounting bracket
6. Battery
7. Screws (2x)
8. Plugs (2x)

*The LED indicator can appear dim.

Safety Instructions

WARNING: Installing the battery

1. Turn the alarm counter clockwise to remove it from the bracket.
2. Insert the battery into the battery compartment ensuring correct polarity.
3. Attach the alarm back to the bracket.
4. Test the product.

Constant exposure to high or low humidity may reduce battery life.

Product Installation

• The product can be installed on a sloped ceiling.
• For optimal smoke detection, install the product at a minimum height of 1.80 m.
• Do not overtighten screws to avoid bracket deformation.

Installing the Nedis SmartLife App

1. Download the Nedis SmartLife app on your phone from Google Play or Apple App Store.
2. Create an account with your e-mail address and verify it.
3. Create a password and set up your SmartLife Home.

Connecting the App

1. Ensure Wi-Fi and Bluetooth are enabled on your smartphone.
2. Open the Nedis SmartLife app, register/login, and follow instructions to connect the Smoke Detector.

Disconnecting the App

1. Open the Nedis SmartLife app, access Wi-Fi Smoke Detector, and remove the device.

Testing the Product
The product must be tested by pressing the test/silence button. The alarm will beep six times and the indicator will flash red.

Silent Mode
In silent mode, the alarm does not sound for 9 minutes. Activate silent mode manually during an alarm by pressing the test/silence button. After 9 minutes, the product returns to standby mode.

FAQ

• Q: How do I know when to replace the battery?
  A: The smoke alarm will emit a low-battery alert sound when it’s time to replace the battery.

• Q: Can I install the smoke alarm on a sloped ceiling?
  A: Yes, the smoke alarm can be installed on a sloped ceiling, but avoid installing it at the tip where smoke-free air can collect.

Specifications

Smartlife notification

Low-battery alert| Yes
Operating temperature| -10 °C – 55 °C
Operating humidity| ≤95%
Wireless connections| Wi-Fi: 802.11 b/g/n
Wi-Fi frequency range| 2412 – 2472 MHz

Smoke alarm

For more information see the extended manual online: ned.is/wifids20wt | ned.is/wifids20wt3

Intended use

• The WIFIDS20WT/WIFIDS20WT3 is a Wi-Fi smoke alarm.
• This product is intended for smoke detection in confined spaces.
• The product is powered by a CR123A battery (included) and has a low battery warning indicator.
• The product is designed for detecting smoke in the air. The smoke alarm cannot prevent a fire.
• The product is intended for indoor use only.
• Any modification of the product may have consequences for safety, warranty and proper functioning.
• This product is intended to be used in household and similar applications such as kitchen areas.
• The product must not be mounted in damp rooms, near doors, windows, ventilators or radiators.

Main parts (image A)

1. Alarm
2. Test/Silence button
3. Indicator*
4. Battery compartment
5. Mounting bracket
6. Battery
7. Screws (2x)
8. Plugs (2x)

*The led indicator can appear dim.

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose the product to water, rain, moisture, or high humidity.
• Test the product once per week to ensure proper operation.
• Do not paint the product.
• Do not use this product in a dusty or smoky ambience.
• Do not use the product for outdoor uses, the product is designed for indoor use.
• Replace the product under conditions of malfunction or end-of-life.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Do not dismantle, open or shred cells or batteries.
• Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
• Do not short-circuit a cell or a battery.
• Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
• Do not subject cells or batteries to mechanical shock.
• In the event of a battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Only use the battery type(s) recommended in this document.
• Keep cells and batteries clean and dry.
• Retain the original product literature for future reference.
• Battery usage by children should be supervised.
• Dispose of the cell or battery properly.
• Seek medical advice immediately if a cell or a battery has been swallowed.

Installing the battery

1. Turn the alarm A1 counter clockwise to remove it from the bracket A5.
2. Insert the battery A6 into the battery compartment A4. Make sure that the battery polarity (+/-) matches the polarity markings inside the battery compartment.
3. Turn the alarm A1 clockwise to attach it to the bracket A5.
4. Test the product.

Constant exposure to high or low humidity may reduce battery life.

Choosing a location (image B)
For the highest safety, it is recommended to install the product in areas with a source of combustion where smoke can be detected as quickly as possible. The product should be installed in:

• Every sleeping area.
• Both ends of a hallway longer than 12 m.
• Every room where a furnace, a heat source and/or other burning devices are located.
• Every room where multiple people spend several consecutive hours.
• Install at least one product on each floor of a multi-level home.

In areas with a source of combustion:

• On the ceiling, at least 50 cm away from surrounding walls.
• At a central point in the room.
• Not in turbulent air (near windows, ceiling fans or air conditioners).

The product can also be installed on a sloped ceiling.

Do not install in the tip of a sloped ceiling as smoke-free air can collect in these areas, preventing smoke from reaching the product. In sleeping areas:

• Not in turbulent air (near windows, ceiling fans or air conditioners).
• Not behind objects (curtains or closets).

Other areas

• Not in turbulent air (near windows, ceiling fans or air conditioners).
• Not behind objects (curtains or closets).

For optimal smoke detection install the product at a minimal height of 1.80 m. Do not install the product:

• in dirty, greasy or dusty areas.
• in temperatures below -10 ºC.
• in temperatures above 55 ºC.
• in turbulent air (near ceiling fans, air conditioners or open windows).
• within 3 meters of a high humidity source.
• within 1.5 meters of kitchen appliances.
• within 6 m of a furnace or fuel burning heat sources.
• behind objects like curtains or closets.
• within 1 m of fluorescent light.

Installing/Mounting the product (image C & D)

1. Place the bracket A5 in the desired location.
   Follow steps 2. – 6. for stone/concrete surfaces. Continue to step 5. for wood surfaces.

2. Use the bracket A5 to mark the drill locations with a pencil.

3. Drill two Ø 4 mm holes.

4. Insert the plugs A8 into the holes.

5. Fasten the bracket A5 with the screws A7.

   • Do not overtighten the screws, this will deform the bracket.
   • Alternatively, attach the mounting bracket to the surface with the adhesive strip.
   • Turn the alarm A1 clockwise to attach it to the bracket A5.

Installing the Nedis SmartLife app

1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap Continue.
   • You will receive a verification code on your e-mail address.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.

Connecting the app

1. Make sure Wi-Fi is enabled on your smartphone.
2. Make sure Bluetooth is enabled on your smartphone.
3. Open the Nedis Smartlife app on your phone.
4. Register or login to your account.
5. Tap + in the top right corner.
6. Select “Wi-Fi Smoke detector”
7. Follow the instructions in the app.

Disconnecting the app

1. Open the Nedis Smartlife app on your phone.
2. Open “Wi-Fi Smoke detector” by tapping the corresponding tile in the app.
3. Tap the pencil icon in the top right corner.
4. Tap Remove Device at the bottom and confirm.

Smoke alarm
When the product detects smoke, the alarm beeps and the indicator A3 flashes red. In case of an alarm:

• Identify the source of the smoke.
• Resolve the problem.

Testing the product
The product must be tested to ensure proper operation.
Press the test/silence button A2. The alarm beeps six times and the indicator A3 flashed red.

Silent mode
In silent mode, the alarm does not sound for 9 minutes.
The silent mode can be activated manually during an alarm.
Press the test/silence button A2 while the alarm sounds to activate silent mode. After 9 minutes, the product returns to standby mode.

Beeps once every 40 seconds.
Malfunction| A 3 blinks red twice

every 40 seconds.

| Beeps once every 40 seconds.
Smoke alarm| A 3 flashes red.| Beeps continuously.

The led indicator can appear dim.

Troubleshooting

battery is installed properly.
Try a different battery.
A 3 blinks once and the alarm sound once every 40 seconds.| Battery is low. Replace the battery.
A 3 blinks twice and the alarm sound once every 40 seconds.| The product is malfunctioning.
Replace it.

The led indicator can appear dim.

Disposal
The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible for the waste management.

Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product WIFIDS20WT / WIFIDS20WT3 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety data sheet if applicable) can be found and downloaded via:
nedis.com/WIFIDS20WT#support
nedis.com/WIFIDS20WT3#support

ned.is/wifids20wt

ned.is/wifids20wt3

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands [email protected]

References

• Nedis | Your wholesaler of consumer electronics
• Nedis | Your wholesaler of consumer electronics
• Offer to sell domain: nedis.pl
• Offer to sell domain: nedis.pl

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>