AudioControl AC-LGD 20 OHM Load Generating Device and Signal Stabilizer User Manual
- June 3, 2024
- AudioControl
Table of Contents
AC-LGD 20 OHM
Load Generating Device and Signal Stabilizer
User Manual
AC-LGD 20 OHM Load Generating Device and Signal Stabilizer
FOR OEM SOUND SYSTEMS REQUIRING A SPEAKER LOAD PROVIDES STABILITY TO OEM SOUND
SYSTEMS IDEAL FOR NON-AMPLIFIED DODGE®
, CHRYSLER®, JEEP®, MASERATI® MAXIMUM INPUT 15 VRMS (50 WATTS)
What is a Load Generating Device?
Today’s factory amplifiers feature built-in protection circuits that can mute
some or all audio outputs when the factory speakers are removed. The AC-LGD 20
has been designed to generate load and stabilize signals from amplified
factory systems to ensure the best possible audio.
Quick
Start:
- Remove one speaker-level input plug from your AudioControl active line output converter (LOC), processor, or amplifier
- Unplug one end of AC-LGD 20 then plug the AC-LGD 20 into the LOC
- Install the plug you removed from the LOC to the open end of the AC-LGD 20
- Connect your factory speaker signals to the AC-LGD 20
- If you are using a LOC with different style connectors, unscrew the connectors from the AC-LGD 20 wires and connect the wires accordingly
**Important
**
→ Do not exceed 15 Vrms (50 watts) of input
→ Operating Impedance: 20 Ohms
→ Do not install under the carpet or near heat sources
What’s Included?
One pair of AC-LGD 20s prewired with EIA color-coded wires
22410 70th Ave West
Mountlake Terrace, WA 98043 USA
Phone 425-775-8461
Fax 425-778-3166
©2019 AudioControl. All rights reserved. P/N 9120630
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>