AudioControl AC-LGD Load Generating Device and Signal Stabilizer for Oem Sound Systems Requiring A Speaker Load Instruction Manual
- June 3, 2024
- AudioControl
Table of Contents
AudioControl AC-LGD Load Generating Device and Signal Stabilizer for Oem
Sound Systems Requiring A Speaker Load
PROVIDES STABILITY AND NOISE FILTERING FOR CLASS D AMPLIFIED OEM SOUND SYSTEMS MAXIMUM INPUT 20 VRMS (100 WATTS)
What is a Load Generating Device?
Today’s factory systems include more Class D amplifier technology which can
mute, distort, or emit damaging frequencies to your after-market audio
equipment when the factory speakers are removed. The AC-LGD has been designed
to generate load and stabilize signal from the factory system to ensure the
best possible audio.
Quick Start
- Remove one speaker-level input plug from your AudioControl active line output converter (LOC), processor, or amplifier
- Unplug one end of the AC-LGD then plug the AC-LGD into the LOC
- Install the plug you removed from the LOC to the open end of the AC-LGD
- Connect your factory speaker signals to the AC-LGD
- If you are using a LOC with different style connectors, unscrew the connectors from the AC-LGD wires and connect the wires accordingly.
Important
- Do not exceed 20 Vrms (100 watts) of input
- Operating Impedance: 2 kΩ (20 Hz to 20 kHz) / 40 Ω (>20 kHz)
- Do not install under carpet or near heat sources
What’s Included
One pair of AC-LGDs prewired with EIA color-coded wires
Also makes a charming bracelet!
22410 70th Ave West | Mountlake Terrace, WA 98043 USA
Phone 425-775-8461 | Fax
425-778-3166
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>