MAYNE MIS144 MEsea Side Table Installation Guide
- June 1, 2024
- MAYNE
Table of Contents
MAYNE MIS144 MEsea Side Table
Product Information
Specifications
- Model: MIS144 – MESA SIDE TABLE #8703
- Materials:
- Wood: 100% FSC Certified Cedar with water-based stain
- Polyethylene: High-quality LLDPE resin
- Dimensions:
- Tabletop: Standard size
- Legs: Standard height
Product Usage Instructions
Assembly Guide
- Attach Legs (part A and B) to the Support Panel (part C) using 4 – M5x45mm wood screws (part G).
- Repeat for the other side using the Support Panel without the logo (part D).
- With 2 – M5x45mm wood screws (part G), attach one shelf (part E) to the first leg assembly.
- Repeat Step 3 to attach the shelf to the second leg assembly.
- Add the second shelf (part E) and secure it with 4 – M5x45mm wood screws (part G).
- Attach the table top (part I) to the leg assembly with M6x50mm truss screws (part H).
- Install the adjustable feet (part F) in the bottom of each leg.
Product Maintenance
The MESA Side Table is designed for year-round use and built to last.
Extend the life of the table and keep it looking new by treating the wood
components yearly with a water-based wood stain or sealant designed for
exterior use.
General Information About the Materials
-
WOOD: The wood components provided with your MESA product are made from 100% FSC Certified Cedar and come with a protective water-based stain. The Cedar is resilient and intended for year-round use in all climates. Please Note: With any natural wood product, it is common to see knots, small checks (cracks), minor warping, and fading as part of the weathering process. These
minor imperfections occur naturally and have no impact on the strength or integrity of the product. -
POLYETHYLENE: The resin components provided with your MESA product are molded from high-quality polyethylene (LLDPE). This material is extremely durable and is also intended for year-round use in all climates.
FAQ
- Q: Do I need any special tools for assembly?
A: Manual assembly is recommended, but a power drill will be required for Step
- Ensure to use the specified screwdriver bits and follow torque settings.
- Q: How should I clean the MESA Side Table?
A: Simply wipe down the table with a damp cloth. Avoid using harsh chemicals that may damage the wood or resin components.
Thank you for purchasing the MESA Side Table!
For further inquiries or additional information, kindly reach out:
[email protected]
Toll-Free Phone: 1-866-363-8834
INSTRUCTIONS
- Read through all instructions before beginning assembly.
- Inspect all the pieces to ensure you have everything you need.
- Manual assembly recommended. However, a power drill will be required for Step 6. Be sure to reduce the torque setting and be careful not to over-tighten.
- Assemble side table on a clean, smooth surface to avoid scratching the product.
- Save all packaging until finished.
WHAT’S INCLUDE
Tools Needed:
ASSEMBLY INSTRUCTION
- Attach Legs (part A and B) to the Support Panel (part C) using 4 – M5x45mm wood screws (part G). Make sure the logo faces outward and pre-drilled holes face upward as shown. Top surface of cross support should be aligned parallel with the top and bottom surface of the legs.
- Repeat for the other side using the Support Panel without the logo (part D).
- With 2 – M5x45mm wood screws (part G), attach one shelf (part E) to the first leg assembly. Align the pre-drilled holes as shown ensuring the counter sunk feature is facing upward. Underside of the shelf is labelled “bottom”.
- Repeat Step 3 to attach the shelf to the second leg assembly.
- Add the second shelf (part E) and secure it with 4 – M5x45mm wood screws (part G).
- Attach the tabletop (part I) to the leg assembly with M6x50mm truss screws (part H). Install two truss screws per leg. There are no pre-drilled holes in the table; however, the screws will self-tap into the plastic.
- Install the adjustable feet (part F) in the bottom of each leg.
The MESA Side Table is designed for year-round use and built to last. Extend the life of the table and keep it looking new by treating the wood components yearly with a water-based wood stain or sealant designed for exterior use.
GENERAL INFORMATION ABOUT THE MATERIALS
-
WOOD: The wood components provided with your MESA product are made from 100% FSC Certified Cedar and come with a protective water-based stain. The Cedar is resilient and intended for year-round use in all climates.
Please Note: With any natural wood product, it is common to see knots, small checks (cracks), minor warping, and fading as part of the weathering process. These minor imperfections occur naturally and have no impact on the strength or integrity of the product. -
POLYETHYLENE: The resin components provided with your MESA product are molded from high-quality polyethylene (LLDPE). This material is extremely durable and is also intended for year-round use in all climates.
MAINTENANCE
- WOOD: The cedar components are pre-stained at the factory but exposure to sunlight will break down the water repellent, reducing the effectiveness. To extend the life of your product, we recommend staining the wood components on an annualbasis. If products will be exposed to harsh weather for prolonged periods of time, we recommend covering when not in use for added protection.
- POLYETHYLENE: Clean using a non-abrasive cleaner and cloth, then simply rinse with a garden hose. For deeper cleaning you can use a power washer; however, be careful to only spray the polyethylene surfaces and do not pressure wash the wood as this will deteriorate the protective stain.
- HARDWARE: Inspect screws and bolts annually for signs of rust. If rust is present, sand and repaint or replace if necessary.
SAFE USE RECOMMENDATIONS:
- Inspect wood for splinters and sand smooth before use.
- Ensure all hardware is firmly tightened before using product, being careful not to overtighten since this could cause crushing and splintering of the wood.
- Wood is not flame retardant and will burn. Do not place furniture too close to fire pits or open flames. Caution should be used if placed in proximity to fire pits or open flames.
- Use product on a level surface. Adjustable feet are included to assist with minor leveling adjustments.
LIMITED WARRANTY
Mayne products are covered by a warranty that safeguards against defects in materials, manufacturing, and workmanship. This warranty is exclusive to the original owner and is non-transferable. To validate any warranty claims, proof of purchase and regular maintenance are essential.
- Hardware – 1 Year
- Wood Components – 5 Years
- Resin Components – 15 Years
This Limited Warranty does not cover:
- Labor for replacement of any defective item(s).
- Incidental or consequential damages.
- Cosmetic defects which do not affect performance or integrity.
- Vandalism; improper use or installation, or acts of nature including but not limited to windstorms, hail, floods, excessive water exposure or damage by animals/wildlife.
Warranty claims may be submitted by providing photos of the defect along with proof of purchase to [email protected].
gomayne.com
7024 Kilbourne Rd Unit A
London, ON N6P 1K6